Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with CertsForce

The Sustainable Sites (SS) category addresses the site selection, design, construction, and operation of a project, as well as its impacts on the natural and built environment. One of the goals of this category is to reduce light pollution and discourage the development of previously undeveloped land. Light pollution is the excessive or inappropriate use of artificial lighting that can have adverse effects on human health, wildlife, ecosystems, and astronomy. Previously undeveloped land is land that has not been graded, cleared, or built upon prior to the current project and remains in a natural state. Developingpreviouslyundeveloped land can result in habitat loss, soil erosion, stormwater runoff, and increased infrastructure costs13. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide3

LEED MPRs state:

“Must be in a permanent location on existing land… Must use reasonable LEED boundaries… Must comply with project size requirements: BD+C and O+M: minimum 1,000 sq ft…”

Only option B satisfies all these conditions.

One of the goals of the LEED rating system is to reduce greenhouse gas emissions from transportation by encouraging alternative modes of transportation that are less dependent on fossil fuels. Providing bicycle storage and shower facilities is a strategy that encourages a building’s users to use bicycles as a means of transportation, which can reduce vehicle miles traveled, fuel consumption, air pollution, traffic congestion, and parking demand. This strategy can also promote physical activity and health benefits for the users . References: LEED v4 Green Associate Candidate Handbook, LEED v4 BD+C Reference Guide

 Flush out process is performed to remove volatile organic compounds (VOCs) from the indoor air after construction or renovation12. VOCs are chemicals that can evaporate at room temperature and cause health problems, such as headaches, nausea, and irritation3. Flush out process involves supplying 100% outdoor air to the building for a certain period of time or until a certain amount of air changes are achieved12.

Flush-out documentation | LEEDuser1

Building flushout - option 2 | LEEDuser2

Volatile Organic Compounds’ Impact on Indoor Air Quality | Indoor Air Quality (IAQ) | US EPA3

Water Efficiency is the only credit category that does not have a prerequisite in LEED v4 for Building Design and Construction. Prerequisites are the minimum requirements that all projects must meet to be eligible for LEED certification. They are mandatory and non-weighted, meaning they do not contribute to the project’s score. The other credit categories have at least one prerequisite each, as shown in the table below:

Building and material reuse contribute to the sustainability goals of a project by reducing the use of raw materials, which can save energy, water, and natural resources, as well as reduce greenhouse gas emissions, waste generation, and environmental impacts. By reusing existing buildings or materials, project teams can avoid the extraction, processing, transportation, and disposal of new materials, which can have significant environmental and social costs. LEED v4.1 recognizes and rewards multiple strategies for building and material reuse in the Building-Life Cycle Impact Reduction credit1.

To maintain the LEED Green Associate credential, you must earn 30 continuing education hours every two years, with at least six of those hours being LEED specific. This requirement ensures that LEED Green Associates stay up-to-date with the latest developments in green building practices and LEED rating systems. References: LEED Green Associate Candidate Handbook, U.S. Green Building Council resources

Reused materials are materials that have been used before and are incorporated into a new building without significant alteration1. They are different from recycled materials, which are materials that have been reprocessed into new products or materials2. Reused materials reduce the demand for new resources and the amount of waste sent to landfills1. LEED v4 encourages the use of reused materials by awarding points for Building Product Disclosure and Optimization - Sourcing of Raw Materials3.

Construction Waste Management | WBDG - Whole Building Design Guide1

Why plastic waste is an ideal building material - BBC Future2

LEED v4 | HPAC Engineering3

SRI is a measure of a material's ability to reflect solar heat (reflectivity) and release absorbed heat (emissivity). This index helps evaluate materials for reducing the heat island effect under the Sustainable Sites category​​.