Pass the Cisco CCNP Data Center 350-601 Questions and answers with CertsForce

Viewing page 1 out of 6 pages
Viewing questions 1-10 out of questions
Questions # 1:

Which Cisco UCS firmware reboot policy must be used in the maintenance policy to prevent the server firmware from upgrading automatically and wait for user input before proceeding?

Options:

A.

Immediate


B.

Schedule


C.

User-ack


D.

Timer-automatic


Expert Solution
Questions # 2:

What is a benefit of independent resource scaling in Cisco

HyperFlex hybrid architecture?

Options:

A.

flexible expansion of compute, caching, and capacity


B.

remote booting of converged servers


C.

multivendor converged node hardware support


D.

support for compute nodes with third-party storage


Expert Solution
Questions # 3:

An engineer must recover the Cisco UCS system. The full backup is available on a backup SCP server. Which set of actions recovers the configuration of the Cisco UCS Manager?

Options:

A.

Create a scheduled restore job. Reboot the UCS Manager.


B.

Create an import-config task Set the action to Replace.


C.

Factory reset the fabric interconnect. Select the Restore feature.


D.

Copy the backup file to a USB drive. Copy the running-config.


Expert Solution
Questions # 4:

An engineer must analyze packets arriving from a server port on a Cisco Nexus 9000 Series Switch. The packet sniffer is located on a different switch from the one the server is currently connected to. The packet capture must meet these requirements:

    It must capture all incoming packets on the switch port.

    It must capture the first 1000 bytes of the packet to conserve bandwidth.

Which action must be taken to meet these requirements?

Options:

A.

Configure the marker-packet to 1000.


B.

Implement an ACL with the packet-length of 1000.


C.

Enable the MTU size of 1000.


D.

Set rate-limiting to 1000.


Expert Solution
Questions # 5:

Question # 5

Refer to the exhibit An engineer must create a Python script to convert

a Python dictionary called dic to a YAML format and add the output to a

file called switches.yml. Which line must be added to complete the script

to meet these requirements?

Question # 5

Question # 5

Options:

A.

Option A


B.

Option B


C.

Option C


D.

Option D


Expert Solution
Questions # 6:

An engineer must Implement a Python script to manage Cisco Application Centric Infrastructure (ACI) and endpoint groups. Which Python llorarles must be used to parse responses and send requests to Cisco ACI?

Options:

A.

Element Tree and SSL


B.

JSON and EtementTree


C.

JSON and requests


D.

socket and JSON


Expert Solution
Questions # 7:

Anetwork engineer must configure a vPC on a pair of Cisco Nexus switches connected to a third-party load balancer. The connection must meet these requirements:

* The port channel must be negotiated with the load balancer via an open standards protocol.

* Traffic that is sent directly to the physical MAC address of the other peer switch must be forwarded locally by the receiving switch.

Which command set accomplishes these goals?

Options:

A.

vpe domain 10 peer-gateway interface Eth1/1 channel-group 1 mode on


B.

vpe domain 10 peer-switch interface Eth1/1 channel-group 1 mode on


C.

vpe domain 10 peer-switch interface Eth1/1 channel-group 1 mode active


D.

vpc domain 10peer-gateway interface Eth1/1 channel-group 1 mode active


Expert Solution
Questions # 8:

A customer deploys a media server to distribute streaming videos to network clients. The requirement is to allow the video feed to reach only requesting clients. The shared trees must not

propagate the video feed if no clients from that tree request it. To reduce configuration touchpoints, the solution must support the automatic discovery and announcement of RP-set

information. Each router in the network is responsible for selecting the RP. Which configuration set meets these requirements?

Options:

A.

router(config-if)# ip pim sparse-sense mode router(config}# ip pim auto-rp router(config)# ip pim send-rp-announce


B.

router(config-if}# ip pim dense-mode router(config)# ip pim rp-address 1.1.1.1 router(config}# ip pim rp listener


C.

router(config-if}# ip pim bidir-enable router(config}# ip pim ssm default router(config}# ip igmp version 3


D.

router(config-if}# ip pim sparse mode router(config)# ip pim bsr-candidate Lo0 router(config)}# ip pim rp-candidate Lo0


Expert Solution
Questions # 9:

An engineer must apply AAA configuration on a Cisco MDS 9000 Series Switch The solution must meet these conditions :

    It must use a challenge-response authenticator protocol that uses MD5 hashing with an incrementally changing identifier

    The RADIUS configuration must be automatically shared with other MDS switches in the environment

The RADIUS server is already defined. Which command set completes the configuration?

A)

Question # 9

B)

Question # 9

C)

Question # 9

D)

Question # 9

Options:

A.

Option A


B.

Option B


C.

Option C


D.

Option D


Expert Solution
Questions # 10:

Question # 10

Refer to the exhibit. A network engineer must monitor the traffic from the server on VLAN 80.

All source traffic from the server must be captured on the monitoring device. Which configuration set meets these requirements?

Question # 10

Options:

A.

Option A


B.

Option B


C.

Option C


D.

Option D


Expert Solution
Viewing page 1 out of 6 pages
Viewing questions 1-10 out of questions