Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with CertsForce

The document that details ideas, concepts, and criteria that are essential for a building's success is the Owner's Project Requirements (OPR). The OPR outlines the goals, expectations, and criteria from the owner’s perspective, setting a foundational vision for the project. It is used in LEED AP ID+C certification as a guideline for aligning design and construction decisions with the owner's objectives. The Basis of Design (BOD) then takes the OPR’s high-level goals and translates them into technical requirements. Both documents support integrated project delivery by helping ensure design aligns with the owner's goals, but the OPR specifically details what the owner considers essential.

The Materials and Resources Credit, Building Product Disclosure and Optimization - Sourcing of Raw Materials rewards projects that use materials that have optimized extraction processes by limiting or eliminating the extraction of new resources, the reuse of materials or the use of recycled materials1. According to the LEED Reference Guide for Building Design and Construction2, the credit has two options: Option 1. Raw Material Source and Extraction Reporting and Option 2. Leadership Extraction Practices. Option 1 requires the project to use at least 20 permanently installed products from at least five different manufacturers that have publicly released a report from their raw material suppliers which include extraction locations, a commitment to long-term ecologically responsible land use, a commitment to reducing environmental harms from extraction and/or manufacturing processes, and a commitment to meeting applicable standards or programs voluntarily that address responsible sourcing criteria2. Option 2 requires the project to use products that meet at least one of the responsible sourcing criteria below for at least 25%, by cost, of the total value of permanently installed building products in the project:

Extended producer responsibility. Products purchased from a manufacturer (producer) that participates in an extended producer responsibility program or is directly responsible for extended producer responsibility.

Bio-based materials. Bio-based products must meet the Sustainable Agriculture Network’s Sustainable Agriculture Standard. Bio-based raw materials must be tested using ASTM Test Method D6866 and be legally harvested, as defined by the exporting and receiving country. Exclude hide products, such as leather and other animal skin material.

Wood products. Wood products must be certified by the Forest Stewardship Council or USGBC-approved equivalent.

Materials reuse. Reused products must include salvaged, refurbished, or reused products.

Recycled content. Recycled content is the sum of postconsumer recycled content plus one-half the preconsumer recycled content, based on cost. Products meeting recycled content criteria are valued at 100% of their cost for the purposes of credit achievement calculation.

USGBC approved program. Other USGBC approved programs meeting leadership extraction criteria.

Therefore, among the given options, only Option A is relevant to the use of reused/salvaged materials or recycled content, as they can contribute to the materials reuse or recycled content criteria under Option 2. Option B is a prerequisite that requires the project to develop and implement a construction and demolition waste management plan that identifies the materials to be diverted from disposal and whether the materials will be sorted on-site or co-mingled2. Option C is a credit that requires the project to use at least 20 different permanently installed products from at least five different manufacturers that use any of the following programs to demonstrate the chemical inventory of the product to at least 0.1% (1000 ppm):

Health Product Declaration. The end use product has a published, complete Health Product Declaration with full disclosure of known hazards in compliance with the Health Product Declaration Open Standard.

Cradle to Cradle. The end use product has been certified at the Cradle to Cradle v2 Basic level or Cradle to Cradle v3 Bronze level.

REACH Optimization. The end use product is compliant with REACH Optimization criteria.

GreenScreen v1.2 Benchmark. The product’s chemical ingredients are inventoried using the GreenScreen v1.2 Benchmark.

Declare. The Declare product label must indicate that all ingredients have been disclosed down to 1000 ppm.

Option D is a credit that requires the project to use at least 20 different permanently installed products that have environmental product declarations. The products must be sourced from at least five different manufacturers. The environmental product declarations must conform to ISO 14025, 14040, 14044, and EN 15804 or ISO 21930 and have at least a cradle-to-gate scope2.

While increased ventilation improves indoor air quality, it can also lead to higher energy consumption, impacting LEED BD+C Energy and Atmosphere (EA) Credit: Optimize Energy Performance.

More ventilation requires more heating/cooling energy, which can increase energy use and reduce overall energy efficiency.

This can lower the points earned for energy optimization, since LEED rewards projects that minimize energy consumption.

Other credits (Options A, B, and D) are not directly affected by increased ventilation rates.

Energy performance is negatively impacted when additional ventilation leads to increased HVAC energy demand.

(Source: Official LEED BD+C Reference Manual)

An economic advantage of the infill site is that it reduces the need for new utility infrastructure. This is because the infill site is located within an existing urban area that already has access to water, sewer, electricity, and other utilities1. The developer can save on the costs of extending or installing new utility lines and services to the rural greenfield site, which may not have adequate or reliable utility infrastructure2. The other options are not economic advantages, but rather environmental benefits of the infill site. Protecting greenfields and farmland, preserving habitat and natural resources, and reducing potential damage to an existing stream are all positive outcomes of avoiding development on the rural greenfield site, but they do not directly translate into monetary savings for the developer3.

The heat island effect is the phenomenon of urban areas having higher air temperatures than surrounding rural areas due to the absorption and emission of heat by human-made surfaces, such as buildings, roads, and pavements. The heat island effect can have negative impacts on the environment, human health, and energy consumption. One of the strategies to reduce the heat island effect is to use highly reflective paving materials that have a high solar reflectance index (SRI), which measures the ability of a surface to reflect solar radiation and stay cool. However, over time, the paving materials can accumulate dirt and dust, which can lower their reflectance and increase their heat absorption. Therefore, a facility manager cleaning highly reflective paving material is reducing the heat island effect by restoring the reflectance and cooling potential of the surface12.

The Integrative Process Credit is a credit in LEED Building Design and Construction that supports high-performance, cost-effective project outcomes through an early analysis of the interrelationships among systems1. The credit requires project teams to perform analyses for both energy- and water-related systems before completing the schematic design, and to use the findings to inform the owner’s project requirements, basis of design, and design and construction documents1. The example given in the question is an illustration of how selecting a paint color with a higher light reflectance value can reduce the energy use and cost of lighting fixtures, which is an energy-related system. This strategy shows how the project team applied an integrative process to evaluate the impacts of different design options on the building performance and environmental benefits. Therefore, the correct answer is B. Integrative Process Credit.

The correct answer is C, the Cx agent for the project must conduct or oversee the Cx of the PV system. According to the LEED v4 Reference Guide for Building Design and Construction, the Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification, requires that all energy-related systems, including renewable energy systems such as PV, be commissioned by an independent commissioning agent (CxA) or a qualified member of the project team who reports to the owner. The CxA or the qualified team member must perform or oversee all commissioning activities, including developing a commissioning plan, reviewing design documents and submittals, verifying installation and performance, and preparing a commissioning report12 References: 1: LEED v4 Reference Guide for Building Design and Construction, Energy and Atmosphere Prerequisite: Fundamental Commissioning and Verification, page 562. 2: LEED v4 Reference Guide for Building Design and Construction, Glossary, page 1020.

For LEED BD+C Location and Transportation (LT) Credit: Surrounding Density and Diverse Uses, Option 1: Surrounding Density, the project team must measure:

Residential density in dwelling units per acre (DU/acre) or dwelling units per hectare (DU/ha).

Non-residential density based on floor area ratio (FAR).

The density must be measured within a ¼-mile (0.40 km) radius of the project boundary.

This credit promotes high-density development and reduces urban sprawl, thereby improving access to amenities and public transportation.

(Source: Official LEED BD+C Reference Manual)

Smoking tobacco products must be prohibited within a building as a prerequisite to LEED certification, according to the Indoor Environmental Quality Prerequisite, Environmental Tobacco Smoke Control1. This prerequisite aims to prevent or minimize exposure of building occupants, indoor surfaces, and ventilation air distribution systems to environmental tobacco smoke (ETS), which is a known human carcinogen and a source of indoor air pollution2. The prerequisite requires the project to meet one of the following options:

Option 1. No Smoking. Prohibit smoking in the building and within 25 feet (8 meters) of all entries, outdoor air intakes, and operable windows.

Option 2. Smoking Areas. Designate smoking areas outside the building and at least 25 feet (8 meters) from all entries, outdoor air intakes, and operable windows. If smoking areas are enclosed, they must be negatively pressurized and vented directly to the outdoors. Prohibit smoking in all common areas of residential buildings and provide signage to indicate smoking and nonsmoking areas.

The other activities, such as burning fossil fuels, preparing non-organic foods, and manufacturing toxic chemicals, are not explicitly prohibited by any LEED prerequisites, although they may have negative impacts on the environment, health, and energy performance of the building.

Detailed Explanation:

To achieve three points under the Rainwater Management credit, projects must manage the 95th percentile of regional rainfall events on site. This approach minimizes the impact of stormwater runoff on local watersheds and supports the use of low-impact development (LID) techniques such as bioswales, green roofs, and rain gardens.