Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with CertsForce

The commissioning (Cx) agent must have completed the commissioning process activities for a minimum of two similar projects in order to meet the minimum qualifications for Energy and Atmosphere Prerequisite, Fundamental Commissioning and Verification. This is stated in the LEED v4 Building Design + Construction Guide, under the section “Energy and Atmosphere Credits Overview”. The guide also provides examples of similar projects that can be used as references for commissioning.

Detailed Explanation:

To meet the requirements for EVSE compliance under LEED, the equipment must adhere to regional, state, or local standards for electrical connectors. This ensures alignment with the local codes and practices for electric vehicle infrastructure, supporting accessibility and usability of EVSE. LEED prioritizes sustainable transportation by promoting infrastructure that meets standardized requirements, enabling efficient and effective EV charging.

According to the U.S. Green Building Council (USGBC) and U.S. Department of Energy, buildings account for approximately 40% of total energy consumption in the United States.

This includes electricity, heating, and cooling loads across residential, commercial, and industrial buildings.

Buildings are the largest energy consumers, surpassing transportation and industry sectors.

LEED emphasizes energy efficiency to help reduce this 40% energy demand.

Buildings account for 40% of all energy consumption, making Option C the correct answer.

(Source: Official LEED BD+C Reference Manual)

Materials and Resources Credit, Construction and Demolition Waste Management

Salvaged materials are materials that have been recovered or diverted from the waste stream for reuse. They can contribute to the achievement of the Construction and Demolition Waste Management credit, which aims to reduce the amount of waste generated by construction and demolition activities and divert it from landfills and incinerators. By reusing salvaged materials, projects can reduce the demand for new materials, conserve natural resources, save energy, and lower greenhouse gas emissions. Salvaged materials can be counted as part of the total waste diverted from disposal, as long as they are not counted for the Building Life-Cycle Impact Reduction credit1.

The Minimum Program Requirements (MPRs) for LEED certification are:

MPR 1: Must be in a permanent location on existing land

MPR 2: Must use reasonable LEED boundaries

MPR 3: Must comply with project size requirements

Option A does not meet MPR 1 because it is located on a previously undeveloped site, which is not considered existing land. Option B does not meet MPR 3 because it is a parking garage, which is excluded from LEED certification unless it is part of a larger project. Option C does not meet MPR 1 because it is a mobile clinic, which is not considered permanent. Option D meets all the MPRs because it is a permanent building on existing land, it has reasonable LEED boundaries, and it meets the minimum gross floor area of 1,000 ft2 (93 m2) for BD+C projects.

In the context of improving indoor environmental quality, specifically regarding lighting, the LEED BD+C guidelines recommend minimizing the use of direct-only overhead lighting to enhance occupant comfort and reduce glare. To achieve this, projects should ensure that no more than 25% of the total connected lighting load for all regularly occupied spaces is composed of direct-only overhead lighting. This approach encourages the use of alternative lighting strategies, such as indirect or diffused lighting, which contribute to a more comfortable and visually appealing environment. ​

According to the LEED v4 Reference Guide for Building Design and Construction, Option 1 of the Site Development - Protect or Restore Habitat credit requires restoring 25% of the site area (including the building footprint) with native or adapted vegetation1. To achieve exemplary performance, the project must double the credit requirements and restore 50% of the site area2. In this case, the site area is 100,000 ft2 (9 290 m2), so the project must restore 50,000 ft2 (4 645 m2) with vegetation. The project already has 35,000 ft2 (3 250 m2) of native vegetated open space, so it needs to add another 15,000 ft2 (1 395 m2) of vegetation. Since the on-grade surface is fully occupied by the building footprint and the asphalt parking, the only option is to incorporate a vegetated roof. Therefore, the design team will have to incorporate a native and/or adapted vegetated roof with a minimum area of 15,000 ft2 (1 395 m2). References: SS Credit Site Development - Protect or Restore Habitat, LEED v4 Reference Guide for Building Design and Construction13

Detailed Explanation:

The LEED boundary for Phase 1 can include only the building site (Phase 1) but must commit to keeping the Phase 2 grounds undisturbed until the second phase begins. This approach aligns with LEED's requirement to define boundaries where work occurs and ensures environmental protection for future development areas.

An accessible garden with native plants supports:

Sustainable Sites (SS) Credit: Open Space by providing outdoor access and promoting biodiversity.

Sustainable Sites (SS) Credit: Rainwater Management by improving stormwater infiltration and reducing runoff.

Other options are not directly related to native gardens.

(Source: Official LEED BD+C Reference Manual)