Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with CertsForce

Discussing the project goals to help identify the credits and options that the team should attempt is an example of developing the LEED Scorecard. The LEED Scorecard is a tool that shows the potential points that a project can achieve under each credit category of the LEED rating system1. Developing the LEED Scorecard involves selecting the most appropriate credits and options based on the project’s goals, location, budget, and design2. The scorecard helps the project team track their progress and prioritize their actions throughout the design and construction process1. References:

LEED scorecard | U.S. Green Building Council

LEED v4: Building Design + Construction Guide - U.S. Green Building Council

The first step in earning the Water Efficiency (WE) Credit: Cooling Tower Water Use is to identify the maximum number of cycles of concentration for the cooling tower or evaporative condenser. This step establishes a baseline for water quality and helps determine potential water savings through maximizing the number of cycles, which minimizes water and chemical usage in cooling systems. Subsequent steps may involve chemical analysis (D) or exploring alternative water sources, but setting the cycles is the initial requirement.

The Owner’s Project Requirements (OPR) is a document that defines the goals, expectations, and performance criteria of the project, as established by the owner or the owner’s representative1. The OPR is one of the key deliverables of the commissioning process and serves as the basis for the design, construction, and operation of the building systems. Therefore, the priority for the Commissioning Authority (CxA) to consider when the contractor substitutes a higher efficiency piece of equipment is whether the substitution meets or exceeds the OPR. The CxA should verify that the new equipment is compatible with the OPR and does not compromise the performance, functionality, or reliability of the system. The CxA should also communicate the substitution to the owner and the design team and document the change in the commissioning plan and report.

The minimum scope of analysis for a product-specific declaration is cradle-to-gate, which means from raw material extraction to the factory gate. This option requires the use of at least 20 different permanently installed products sourced from at least five different manufacturers that have product-specific declarations.

The correct answer is C. Proximity of vulnerable populations to major sources of air pollution.

According to the LEED v4.1 Reference Guide for Building Design and Construction, the Site Assessment credit requires projects to conduct and document a site inventory and analysis that covers the following topics1:

Topography

Hydrology

Climate

Vegetation

Soils

Human use

Human health effects

The human health effects topic includes identifying the proximity of vulnerable populations, such as children, elderly, or low-income residents, to major sources of air pollution, such as highways, power plants, or industrial facilities. This information can help the project team design strategies to minimize the exposure of occupants and visitors to harmful pollutants and improve the indoor and outdoor air quality of the project1.

The other options are not required for the Site Assessment credit, although they may be relevant for other credits or prerequisites. A targeted Brownfield remedy plan is required for the Brownfields Remediation credit, which applies to projects located on sites contaminated by past uses1. A historic preservation plan to include neighboring properties is not required for any LEED credit, although projects that involve historic buildings or districts must comply with local regulations and standards for preservation1. The surrounding density within a 1/4 mi. (0.40 km) radius of the project boundary is not required for the Site Assessment credit, but it is used to calculate the points for the Surrounding Density and Diverse Uses credit, which encourages projects to locate in areas with high levels of existing development and mixed land uses1.

Detailed Explanation:

T60 is the unit used to measure reverberation time, which is the time it takes for sound to decay by 60 decibels in a space. This metric is critical for achieving the Acoustic Performance credit under LEED, as it ensures that spaces are designed to provide optimal acoustic environments that enhance occupant comfort and productivity.

Xeriscaping is a landscaping method that reduces water demand by using plants that are adapted to dry climates, mulching the soil to retain moisture, and minimizing the amount of lawn and other turf areas. Xeriscaping can help save water, money, and energy, as well as improve the health of the soil and the environment.

Detailed Explanation:

The space-by-space method allows for a more precise calculation of allowable lighting power by assigning specific lighting power densities (LPDs) to each space type based on its function. This method aligns with LEED’s goal of optimizing energy performance by tailoring lighting to the actual requirements of the building’s spaces.

Incorporating precipitation sensors with smart irrigation controllers (C) maximizes irrigation efficiency by adjusting water usage according to real-time weather data and soil moisture levels, reducing unnecessary irrigation during rainfall. This LEED strategy helps conserve water and supports the Water Efficiency (WE) Credit: Outdoor Water Use Reduction. Fixed rates (A), timers (B), and overlapping sprinkler heads (D) do not optimize water based on environmental conditions, leading to possible water waste.

Sustainable Sites (SS) Credit: Light Pollution Reduction addresses light trespass, glare, and skyglow, ensuring that a project:

Minimizes unnecessary outdoor lighting to prevent disruption to surrounding properties.

Uses full-cutoff fixtures to direct light downward and reduce nighttime skyglow.

Follows lighting zone guidelines based on project location.

This promotes dark-sky compliance and reduces light pollution, benefiting ecosystems and human health.

(Source: Official LEED BD+C Reference Manual)