Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with CertsForce

Under LEED BD+C Energy and Atmosphere (EA) Prerequisite: Minimum Energy Performance, major renovations must achieve a minimum energy cost savings of 3% when incorporating renewable energy systems.

New construction projects require a 5% minimum savings.

Major renovations must achieve at least 3% savings.

Core and shell projects must achieve 2% savings.

For major renovations, LEED requires at least 3% energy savings, making Option B correct.

(Source: Official LEED BD+C Reference Manual)

Retail projects must conduct a waste stream audit for the duration of the project in an existing location or make projections based on historical data for similar establishments. Identify the top-five recyclable waste streams while stating the top-four waste streams where both collection and storage space will be provided. This is the requirement for Retail projects under the Materials and Resources Prerequisite, Storage and Collection of Recyclables, according to the LEED v4 BD+C Reference Guide1. The purpose of this prerequisite is to facilitate the reduction of waste generated by building occupants that is hauled to and disposed of in landfills1. The prerequisite applies to all LEED BD+C projects, but Retail projects have a different approach than other project types because of their unique waste streams and operational characteristics1. Retail projects must conduct a waste stream audit for the duration of the project in an existing location or make projections based on historical data for similar establishments. The audit or projection must identify the top-five recyclable waste streams by weight or volume using consistent metrics throughout1. The waste stream study period must be a minimum of 24 hours1. Retail projects must also provide dedicated areas that serve the entire building and are accessible to waste haulers and building occupants for the collection and storage of materials for recycling for at least four of the top-five recyclable waste streams identified by the audit or projection1. References:

Prerequisite: Storage and collection of recyclables | U.S. Green Building Council

Detailed Explanation:

In a cold climate, additional envelope insulation is the most effective strategy for reducing energy costs. Improved insulation minimizes heat loss through the building envelope, reducing the demand for heating systems. This aligns with LEED’s focus on enhancing energy efficiency and thermal performance in building design.

Reducing the area planned for surface parking and replacing it with additional vegetated space can provide several benefits to the owner, such as:

Decreasing the amount of bicycle parking that must be provided, since there will be less demand for parking spaces for cyclists.

Increasing the overall SR (solar reflectance) of the hardscape area, which can reduce the cooling load and energy consumption of the building.

Decreasing the required amount of on-street parking that must be provided, since there will be less demand for parking spaces for cars.

However, one of the most significant benefits of this strategy is increasing the rainwater infiltration capacity, which can improve the water quality and quantity in the stormwater system. According to a study by Biondolilo1, integrating green space into parking lots can decrease stormwater runoff, mitigate the heat island effect, store carbon, improve air quality and may have social benefits as well. The study estimated that converting 30% of Manhattan’s parking into green space would decrease runoff and pollutants from parking lots1. Therefore, this strategy can help reduce water demand and environmental impact in arid climates.

SRI generally decreases with age

The Solar Reflectance Index (SRI) is a measure of the ability of a surface to reflect solar heat, as shown by a small temperature rise. It is calculated using the values of solar reflectance and thermal emittance of the surface. The higher the SRI, the lower the heat island effect. However, SRI generally decreases with age due to factors such as weathering, dirt accumulation, and biological growth. Therefore, the Sustainable Sites Credit, Heat Island Reduction takes into account both new and three-year aged SRI values for roofing material to ensure that the material maintains a high level of reflectance over time.

Detailed Explanation:

Preliminary energy modeling focuses on the building’s massing, orientation, thermal comfort ranges, and energy supply sources. Plug and process loads are typically omitted at this stage as they are highly variable and depend on specific occupant behavior and equipment usage. LEED focuses on the building’s core energy performance during preliminary analysis.

The Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies aims to establish better quality indoor air for the building occupants that promotes their comfort and well-being1. This credit requires the project team to implement several strategies to reduce the exposure of occupants and HVAC systems to environmental tobacco smoke, airborne contaminants, and chemicals1. One of the strategies is to design and construct all interior partitions to full height (deck-to-deck) or provide a hard-lid ceiling for spaces where hazardous gases or chemicals may be present or used2. This strategy helps prevent the migration of contaminants from one space to another through the plenum3. A copy room is an example of such a space, as it may contain printers, copiers, toners, and solvents that can emit volatile organic compounds (VOCs) and particulate matter (PM) into the air4. Therefore, the project team can achieve Indoor Environmental Quality Credit, Enhanced Indoor Air Quality Strategies by providing a hard-lid ceiling for the copy room.

According to the LEED v4 Reference Guide for Building Design and Construction, Option 2 of the Sourcing of Raw Materials credit requires using products that meet at least one of the responsible extraction criteria for at least 25%, by cost, of the total value of permanently installed building products in the project1. Therefore, for a project with a material cost of $100,000, the minimum material value needed to achieve this option is 25% of $100,000, which is $25,000.

Selecting a high-reflectance interior paint that meets the SCAQMD Rule 1113 can help contribute towards two credits: Indoor Environmental Quality Credit, Low-Emitting Materials and Indoor Environmental Quality Credit, Interior Lighting. The first credit requires that interior paints and coatings comply with the VOC content limits specified by the SCAQMD Rule 1113 or equivalent standards to reduce indoor air contaminants that are odorous, irritating, and/or harmful to the comfort and well-being of installers and occupants1 The second credit aims to provide high-quality lighting that supports visual acuity and occupant comfort, and that responds to the needs of the space and its users. One of the strategies to achieve this credit is to use light-colored finishes with a minimum reflectance of 0.7 for ceilings, 0.5 for walls, and 0.2 for floors to increase the effectiveness of daylighting and electric lighting systems2 References: 1: LEED v4 Reference Guide for Building Design and Construction, Indoor Environmental Quality Credit: Low-Emitting Materials, page 692. 2: LEED v4 Reference Guide for Building Design and Construction, Indoor Environmental Quality Credit: Interior Lighting, page 715.

Regular building occupants are individuals who consistently use the building. According to LEED, this includes:

Staff (employees working full-time or part-time)

Primary and secondary students (school occupants)

Higher education students (university students who regularly attend)

Residents (permanent occupants of a residential building)

Retail customers, visitors, and periodic volunteers are considered transient occupants and are not classified as regular occupants.

(Source: Official LEED BD+C Reference Manual)