Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with CertsForce

The Solar Reflectance Index (SRI) is a measure of the roof’s ability to reject solar heat, as shown by a small temperature rise. It is defined so that a standard black (reflectance 0.05, emittance 0.90) is 0 and a standard white (reflectance 0.80, emittance 0.90) is 100. SRI is calculated using the roof surface’s Solar Reflectance (SR) and Thermal Emittance (TE). SR is the fraction of solar energy that is reflected by the roof, and TE is the relative ability of the roof surface to radiate heat. Therefore, SRI includes the measure of a material’s ability to reflect solar radiation, but not its ability to absorb or emit thermal radiation.

A simple box energy analysis, also known as a "mass model" analysis, is performed during the early design phases, typically before the completion of the schematic design. This assessment involves creating a simplified model of the proposed building to evaluate its potential energy performance. The goal is to explore various design options and strategies that can reduce energy consumption, such as building orientation, envelope characteristics, and massing. Conducting this analysis early allows the design team to make informed decisions that enhance energy efficiency from the outset. ​

the local equivalent standard is more stringent than ASTM E1527-05

According to the LEED v4 Reference Guide for Building Design and Construction, a Phase I ESA is required for all projects, except for those located on previously developed land that has not been used for industrial, commercial, or agricultural purposes. The Phase I ESA must follow the ASTM E1527-05 standard or a local equivalent. However, if the local equivalent is more stringent than the ASTM standard, then the project must comply with the local equivalent. Therefore, if the new building project is located in a jurisdiction that has a more rigorous standard for Phase I ESA than ASTM E1527-05, then it must complete a new Phase I ESA, regardless of the previous ESA done for the certified facility.

These factors are the major determinants of the total irrigation requirement for a landscaping design, because they affect the water demand and supply of the plants1. Plant species have different water needs and tolerances, rainfall provides natural water input, evapotranspiration rate measures the water loss from the soil and plant surfaces, site exposure influences the solar radiation and wind effects, and irrigation efficiency reflects the amount of water delivered to the plants compared to the amount of water applied2.

USGBC’s vision for using LEED internationally is to promote green building practices that are globally applicable, locally relevant, and culturally sensitive1. To achieve this vision, USGBC provides opportunities for alternative compliance paths (ACPs) that meet the unique needs of a particular region, such as climate, codes, standards, market conditions, and priorities2. ACPs are modifications or additions to existing LEED credits or prerequisites that recognize regional differences and allow for more flexibility and applicability of LEED3. ACPs are developed by USGBC in collaboration with local green building councils, experts, and stakeholders, and are reviewed and approved by the LEED Steering Committee3. ACPs are available for various regions and countries, such as China, India, Brazil, Europe, and Canada2.

The intent of the Water Efficiency Prerequisite, Outdoor Water Use Reduction is to reduce outdoor water consumption by either eliminating the need for irrigation or reducing the irrigation demand by at least 30% from the baseline. This prerequisite requires project teams to evaluate the project’s outdoor water budget and irrigation water demand using the EPA WaterSense Water Budget Tool or a local equivalent. This will help project teams to estimate and optimize water use in landscape designs by selecting appropriate plant species and irrigation system efficiency.

Peak-hour is a term used to describe the time period when the traffic noise is highest, usually during morning and evening rush hours. Peak-hour noise level is measured by the equivalent continuous sound level (Leq), which is an energy-average of the noise level over a specified sample time. For minimum acoustic performance, LEED requires projects to implement acoustic treatment and other measures to minimize noise intrusion from exterior sources for high-noise sites (peak-hour Leq above 60 dBA during school hours).

Under LEED BD+C Water Efficiency (WE) credits, a public use faucet is defined as a sink or faucet that is available for general use in shared spaces, rather than being restricted to private, residential, or patient-specific settings.

School classroom sinks are used by multiple people throughout the day, making them a public use fixture.

Patient room sinks, hotel sinks, and dorm room sinks are considered private use fixtures, as they are designated for individual users or a limited number of occupants.

LEED water efficiency calculations differentiate between private and public use fixtures due to differences in water usage patterns and flow rate requirements.

(Source: Official LEED BD+C Reference Manual)

Detailed Explanation:

A public park qualifies as a diverse use under LEED because it is a publicly accessible facility that serves the community. LEED defines diverse uses as those that provide amenities, services, or public resources within walking distance, promoting walkable neighborhoods and reducing reliance on vehicles.

In the Integrative Process, the Owner’s Project Requirements (OPR) should be created during the predesign phase and edited throughout the project (C). The OPR documents the owner’s goals and objectives, guiding design decisions to align with these priorities. Updating the OPR as necessary ensures that project design and construction remain aligned with the owner’s vision and LEED requirements.