Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-AP-BD+C Questions and answers with CertsForce

Water Efficiency (WE) Prerequisite: Indoor Water Use Reduction requires at least 20% savings over the baseline.

The project initially achieves 18% savings, which does not meet the prerequisite.

With the rainwater harvesting system, the total savings reach 28%, exceeding the minimum 20% prerequisite.

A 28% total reduction qualifies the project for two points under Water Efficiency (WE) Credit: Indoor Water Use Reduction.

The type of metering does not impact the points awarded for this credit.

(Source: Official LEED BD+C Reference Manual)

Coordinating open space features early during the site planning phase is a viable strategy for optimizing open space under Sustainable Sites Credit, Open Space. This can help to preserve natural habitats, reduce heat island effects, and enhance human health and well-being. The credit requires that the project provide outdoor space that is at least 30% of the total site area, and that at least 25% of that outdoor space meets certain criteria for vegetated, pervious, or shaded areas. References:

LEED credit library: This is the USGBC’s comprehensive listing of all the LEED credits available in pursuing certification for your project. The credit library contains the requirements and guidance for each credit, as well as the web-based reference guide for the Building Design and Construction rating system.

Open Space: This is the specific credit page for the Open Space credit under the Sustainable Sites category. It provides the intent, requirements, and strategies for achieving the credit, as well as the number of points available and the applicable project types.

Step by Step Approach to Comply with the Open Space Credit in LEED v4: This is a blog post that explains the steps and calculations involved in complying with the Open Space credit. It also provides some examples and tips for optimizing open space design.

For LEED BD+C Materials and Resources (MR) Credit: Building Product Disclosure and Optimization, teams must prioritize material selection based on environmental and sustainability attributes.

Including material requirements in project specifications ensures that all contractors, suppliers, and stakeholders follow the necessary sustainability criteria.

Selecting locally sourced materials (Option B) is beneficial, but it is not the primary focus of this credit.

Whole-building life-cycle analysis (Option C) is related to a different LEED credit (MR Credit: Whole-Building Life-Cycle Impact Reduction).

Procuring materials directly from raw suppliers (Option D) is not a LEED requirement and does not ensure compliance with disclosure and optimization requirements.

Option A is the correct choice because defining sustainability criteria in specifications helps ensure LEED-compliant materials are used throughout the project.

(Source: Official LEED BD+C Reference Manual)

According to the LEED v4: Building Design + Construction Guide, one of the strategies to reduce indoor water use is to optimize the consumption of showerheads by selecting fixtures that have a flow rate lower than the baseline of 2.0 gallons per minute (gpm) at 80 psi, or a local equivalent for projects outside the U.S. This can help the project achieve the Water Efficiency Prerequisite, Indoor Water Use Reduction, and the Water Efficiency Credit, Indoor Water Use Reduction, by reducing the aggregate water consumption from plumbing fixtures and fittings by at least 20% from the baseline1.

The other choices are not strategies to reduce indoor water use, because:

Designing drip irrigation for landscape is a strategy to reduce outdoor water use, not indoor water use1.

Using high-efficiency HVAC systems is a strategy to reduce energy use, not water use, although it may have some indirect water savings by reducing the cooling tower water use2.

Excluding janitor closets in the building is not a feasible or practical strategy, as janitor closets are necessary for cleaning and maintenance purposes, and may also be required by codes or standards3.

LEED BD+C Location and Transportation (LT) Credit: High Priority Site encourages development in locations with existing infrastructure to promote sustainable land use.

Option 1: Historic District applies to projects located in designated historic districts where at least 75% of land within ½ mile (0.80 km) is previously developed.

Brownfields (Option C) and Federal Renewal Communities (Option D) are separate site categories that fall under different High Priority Site options.

The ¾ mile (1.20 km) radius in Option A is incorrect, as LEED specifically sets the requirement at ½ mile (0.80 km).

To earn this credit under Option 1, a project in a historic district must demonstrate that the surrounding land is predominantly redeveloped.

(Source: Official LEED BD+C Reference Manual)

The Water Efficiency (WE) Prerequisite: Outdoor Water Use Reduction requires projects to reduce landscape water use by at least 30% over a baseline.

The baseline is calculated over the driest three-month period of the year, ensuring that water savings are measured during peak irrigation demand.

Strategies include xeriscaping, high-efficiency irrigation systems, and rainwater collection.

(Source: Official LEED BD+C Reference Manual)

Plug-in task lighting is considered as furniture and is not included in the installed lighting power calculations for Energy and Atmosphere Prerequisite, Minimum Energy Performance. It is also not required to comply with the lighting control requirements of ASHRAE 90.1-2010. However, it can be used to satisfy the individual control requirement of Indoor Environmental Quality Credit, Interior Lighting, Option 1. References:

LEED v4 for Building Design and Construction, p. 361

LEED v4 for Building Design and Construction, p. 6012

ASHRAE 90.1-2010, Section 9.1.13

Achievement of the Location and Transportation Credit, Surrounding Density and Diverse Uses may be affected by the move of the main entrance to the opposite side of the building. This is because the credit requires that the project be located within a minimum density area and within walking distance of diverse uses1. The walking distance is measured from a main functional entry of the project building to the diverse use entry1. If the main functional entry is moved, the distance to the diverse uses may change and affect the credit achievement. The other credits are not affected by the move of the main entrance, as they are based on the location of the project site, not the building entry. The Location and Transportation Credit, High-Priority Site rewards projects that are located on sites that are previously developed, infill, or adjacent to existing development2. The Location and Transportation Credit, Sensitive Land Protection rewards projects that are located on sites that do not contain sensitive land features such as prime farmland, wetlands, or habitats3. The Location and Transportation Credit, LEED for Neighborhood Development Location rewards projects that are located within the boundary of a LEED for Neighborhood Development certified plan4.

Extended producer responsibility

Extended producer responsibility is a leadership extraction practice that encourages manufacturers to take back their products or packaging at the end of their useful life and recycle them in a closed-loop system. This reduces the environmental impacts of extraction, transportation, and disposal of raw materials. LEED rewards projects for choosing materials that have extended producer responsibility programs or policies in place.

The Sustainable Sites Credit, Site Assessment requires the project to conduct and document a site inventory and analysis that evaluates the existing conditions and features of the site, such as topography, hydrology, human use, climate, vegetation, soils, and human health effects1. The purpose of the site assessment is to inform the design and development of the site in a way that protects, restores, and enhances the environmental quality and performance of the site1. The site assessment should include the following elements:

Topography: The shape and elevation of the land surface, including slopes, drainage patterns, and erosion potential.

Hydrology: The movement, distribution, and quality of water on the site, including surface water, groundwater, precipitation, and runoff.

Human use: The current and planned use of the site and its surroundings, including zoning, land use, transportation, utilities, and cultural resources.

Climate: The long-term weather patterns and conditions of the site, including temperature, humidity, wind, solar radiation, and precipitation.

Vegetation: The types, distribution, and condition of plants on the site, including native, invasive, and endangered species, and their ecological functions and values.

Soils: The physical, chemical, and biological properties of the soil on the site, including texture, structure, organic matter, pH, fertility, and contamination.

Human health effects: The potential impacts of the site conditions and features on the health and well-being of the occupants and the surrounding community, such as noise, air quality, water quality, and exposure to hazardous substances.