Pass the CompTIA CompTIA Network+ N10-009 Questions and answers with CertsForce

A toner probe, often referred to as a toner and probe kit, is the easiest and most effective tool for identifying individual cables in a bundle, especially in situations where the patch panel is not labeled. The toner sends an audible tone through the cable, and the probe detects the tone at the other end, allowing the technician to quickly identify the correct cable.

Functionality: The toner generates a tone that travels along the cable. When the probe is placed near the correct cable, it detects the tone and emits a sound.

Ease of Use: Toner probes are straightforward to use, even in environments with many cables, making them ideal for identifying cables in unlabeled patch panels.

Efficiency: This method is much faster and more reliable than manual tracing, especially in complex setups.

Network References:

CompTIA Network+ N10-007 Official Certification Guide: Details tools used for cable identification and troubleshooting.

Cisco Networking Academy: Provides training on using toner probes and other cable testing tools.

Network+ Certification All-in-One Exam Guide: Explains the use of different tools for network cable identification and management.

When a new VLAN is created, it typically exists on a different subnet. If DHCP servers are on a different VLAN, the network needs an IP helper address to forward DHCP requests correctly. Without it, clients in the new VLAN won’t receive an IP address.

Breakdown of Options:

A. Scope size – Increasing the DHCP scope would not resolve the issue if requests aren't reaching the server.

B. Address reservations – Reservations only assign specific addresses to devices; they do not fix DHCP communication issues.

C. Lease time – Changing the lease time does not impact DHCP functionality across VLANs.

D. IP helper – Correct answer. This forwards DHCP requests across VLANs to the DHCP server.

Clientless VPNs allow users to access network resources through a secure web portal using a browser, with no VPN software needed. This is ideal for occasional access to internal resources via HTTPS.

A. Proxy is a gateway for accessing web content, not a VPN.

C. Site-to-site VPN connects entire networks, not individual users.

D. Direct Connect usually refers to dedicated cloud connections, not VPNs.

???? Reference:

CompTIA Network+ N10-009 Official Objectives: 3.3 – Given a scenario, configure and deploy common VPN technologies.

Packet Capture: This method captures and inspects network traffic to identify unauthorized downloads or malicious behavior. It provides detailed insight into the data being transmitted, making it the best tool for this scenario.

Anomaly alerts (A): Alerts may indicate unusual activity but do not provide detailed traffic analysis.

Port mirroring (B): Port mirroring can redirect traffic for analysis but requires a packet capture tool for deeper inspection.

Performance monitoring (C): Focuses on system performance metrics, not detailed traffic content.

EIGRP(Enhanced Interior Gateway Routing Protocol) supports bothIPv4 and IPv6. While OSPFv3 is specific to IPv6 and RIPv2 only supports IPv4, EIGRP was extended to handle dual-stack environments efficiently.

The key difference is that an Intrusion Prevention System (IPS) is installed in line with network traffic, allowing it to actively block threats. In contrast, an Intrusion Detection System (IDS) only monitors and alerts without actively blocking traffic.

Breakdown of Options:

A. An IPS needs to be installed in line with traffic and an IDS does not. ✅ Correct answer. IPS actively prevents threats, while IDS only detects them.

B. An IPS is signature-based and an IDS is not. – False, both can use signature-based detection.

C. An IPS is less susceptible to false positives than an IDS. – False, both can produce false positives, depending on configurations.

D. An IPS requires less administrative overhead than an IDS. – False, IPS requires more administrative effort due to real-time blocking decisions.

When high-bandwidth services like videoconferencing are introduced, two primary factors may degrade performance:

Incorrect QoS Settings (E):QoS (Quality of Service) is used to prioritize traffic. If not configured correctly, critical services like video may not get the necessary bandwidth and prioritization.

Network Congestion (F):Video services consume large amounts of data. If the network doesn’t have sufficient bandwidth or is not segmented properly, congestion will slow down all services.

DNS misconfiguration (A) would affect name resolution, not bandwidth.

Malware (C) could degrade performance, but is not tied to the described scenario.

Outdated software (D) may affect performance in some cases, but not directly linked to network congestion in this case.

Inadequate network security (B) isn't likely to cause general slowness related to video traffic.

✅ So, the most likely culprits are E. Incorrect QoS settings and F. Network congestion.

SIEM (Security Information and Event Management) systems are used to aggregate and analyze log data from various sources, including firewalls, to detect potential security incidents and assist in regulatory compliance. The document explains:

“SIEM solutions aggregate and analyze log and event data from multiple devices, including firewalls, across different locations. They help in real-time monitoring, incident response, and ensuring compliance with security policies.”

Introduction to Disaster Recovery Concepts:

Disaster recovery involves strategies and measures to ensure business continuity and data recovery in the event of a disaster.

Mean Time Between Failures (MTBF):

MTBF is a reliability metric used to predict the time between failures of a system during operation. It is calculated by dividing the total operational time by the number of failures.

Formula: MTBF=Total Operational TimeNumber of Failures\text{MTBF} = \frac{\text{Total Operational Time}}{\text{Number of Failures}}MTBF=Number of FailuresTotal Operational Time​

This metric helps in understanding the reliability and expected lifespan of systems and components.

Example Calculation:

If a server operates for 1000 hours and experiences 2 failures, the MTBF is: MTBF=1000 hours2=500 hours\text{MTBF} = \frac{1000 \text{ hours}}{2} = 500 \text{ hours}MTBF=21000 hours​=500 hours

Explanation of the Options:

A. MTTR (Mean Time to Repair): The average time required to repair a system after a failure.

B. MTBF (Mean Time Between Failures): The correct answer, representing the average time between failures.

C. RPO (Recovery Point Objective): The maximum acceptable amount of data loss measured in time.

D. RTO (Recovery Time Objective): The target time set for the recovery of IT and business activities after a disaster.

Conclusion:

MTBF is a crucial metric in disaster recovery and system reliability, helping organizations plan maintenance and predict system performance.