Pass the CompTIA CompTIA Network+ N10-009 Questions and answers with CertsForce

(Note: Ips will be change on each simulation task, so we have given example answer for the understanding)

To perform a network discovery by entering commands into the terminal, you can use the following steps:

Click on each switch to open its terminal window.

Enter the command show ip interface brief to display the IP addresses and statuses of the switch interfaces.

Enter the command show vlan brief to display the VLAN configurations and assignments of the switch interfaces.

Enter the command show cdp neighbors to display the information about the neighboring devices that are connected to the switch.

Fill in the missing information in the diagram using the drop-down menus provided.

Here is an example of how to fill in the missing information for Core Switch 1:

The IP address of Core Switch 1 is 192.168.1.1.

The VLAN configuration of Core Switch 1 is VLAN 1: 192.168.1.0/24, VLAN 2: 192.168.2.0/24, VLAN 3: 192.168.3.0/24.

The neighboring devices of Core Switch 1 are Access Switch 1 and Access Switch 2.

The interfaces that connect Core Switch 1 to Access Switch 1 are GigabitEthernet0/1 and GigabitEthernet0/2.

The interfaces that connect Core Switch 1 to Access Switch 2 are GigabitEthernet0/3 and GigabitEthernet0/4.

You can use the same steps to fill in the missing information for Access Switch 1 and Access Switch 2.

802.1X is a port-based network access control (PNAC) protocol that provides an authentication mechanism to devices wishing to connect to a LAN or WLAN. It is widely used for secure network access, ensuring that only authenticated devices can access the network, whether they are connecting via wired or wireless means. 802.1X works in conjunction with an authentication server, such as RADIUS, to validate the credentials of devices trying to connect.References: CompTIA Network+ study materials.

The CompTIA Troubleshooting Methodology states that after testing the theory, the next step is to establish a plan of action to resolve the issue.

Troubleshooting Steps:

Identify the problem.

Establish a theory of probable cause.

Test the theory to determine the cause.

Establish a plan of action and implement the solution. ✅ (Correct step)

Verify full system functionality.

Document findings, actions, and outcomes.

Breakdown of Options:

A. Verify full system functionality – Happens after implementing the solution.

B. Document the findings and outcomes – Final step, happens after resolving the issue.

C. Establish a plan of action – ✅ Correct answer. Comes immediately after confirming the cause.

D. Identify the problem – First step, already completed.

The longest prefix match is a routing concept used to find the most specific route to a destination IP address. The routing table performs this calculation to determine the exit interface for a packet, ensuring the most accurate delivery. The document explains:

“Routers use the longest prefix match when searching the routing table to determine the best path for an IP packet. This ensures that the most specific (and thus optimal) route is chosen, based on the destination IP address.”

BNC (Bayonet Neill–Concelman) connectors are commonly used with coaxial cables in RF and wireless applications, including some older Wi-Fi antennas and specialized networking equipment. The document says:

“BNC (Bayonet Neill–Concelman) connectors are typically used with coaxial cables, especially in radio frequency (RF) and some Wi-Fi antenna applications, providing a secure and quick connect/disconnect.”

DHCP Options: DHCP options allow additional configuration parameters, such as the address of a TFTP server, to be provided to clients during the DHCP lease process. This is essential for VoIP phones to locate the server for configuration files.

Exclusions (A): Prevents certain IP addresses from being assigned by DHCP but does not direct devices to servers.

Lease time (B): Determines how long an IP address is assigned but does not impact TFTP settings.

Scope (D): Defines a range of IP addresses but does not include additional server information.

BGP (Border Gateway Protocol) is the only dynamic routing protocol used across the internet. It's classified as an Exterior Gateway Protocol (EGP), responsible for routing between different autonomous systems (ASes).

A. EIGRP and D. OSPF are Interior Gateway Protocols (IGPs), used within organizations.

C. RIP is an outdated IGP with limited use, unsuitable for internet-scale routing.

???? Reference:

CompTIA Network+ N10-009 Official Objectives: 3.1 – Compare and contrast various routing technologies.

LDAP (Lightweight Directory Access Protocol) uses port 389 for standard connections and port 636 for LDAP over SSL (LDAPS), which secures directory service communication.

Breakdown of Options:

A. 22 – SSH port, not used for directory services.

B. 389 – Used for LDAP, but not encrypted.

C. 445 – Used for SMB file sharing, not LDAP.

D. 636 – Correct answer. LDAPS (LDAP over SSL/TLS) secures directory authentication.

IPSec (Internet Protocol Security) is the best choice for secure communication over the internet, as it provides encryption, authentication, and data integrity. It is widely used in VPNs and site-to-site secure tunnels.

Breakdown of Options:

A. DCI (Data Center Interconnect) – A general term for linking data centers, but it doesn’t specify a secure tunneling protocol.

B. GRE (Generic Routing Encapsulation) – Encapsulates traffic but lacks encryption, making it less secure than IPSec.

C. VXLAN (Virtual Extensible LAN) – Used for Layer 2 network overlays, not for securing communication over the internet.

D. IPSec – ✅ Correct answer. Provides encryption, authentication, and integrity for data over the internet.

To validate routing between networks hosting Workstation A and File Server 2, follow these steps:

Review Routing Tables:

Check the routing tables of Router A, Router B, and Router C to identify any missing routes.

Identify Missing Routes:

Ensure that each router has routes to the networks on which Workstation A and File Server 2 are located.

Add Static Routes:

If a route is missing, add a static route to the relevant destination network via the correct interface.

Routing Table:

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

S* 0.0.0.0/0 is directly connected, GigabitEthernet3

10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks

C 10.0.4.0/22 is directly connected, GigabitEthernet2

C 10.0.6.0/24 is directly connected, GigabitEthernet2

L 10.0.6.1/32 is directly connected, GigabitEthernet2

172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks

C 172.16.27.0/30 is directly connected, GigabitEthernet3

L 172.16.27.1/32 is directly connected, GigabitEthernet3

Routing Table:

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

S* 0.0.0.0/0 is directly connected, GigabitEthernet1

10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks

C 10.0.0.0/22 is directly connected, GigabitEthernet1

L 10.0.0.1/32 is directly connected, GigabitEthernet1

172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks

C 172.16.27.4/30 is directly connected, GigabitEthernet1

L 172.16.27.5/32 is directly connected, GigabitEthernet1

Routing Table:

10.0.0.0/8 is variably subnetted, 4 subnets, 2 masks

S 10.0.0.0/22 [1/0] via GigabitEthernet1

S 10.0.4.0/22 [1/0] via GigabitEthernet2

172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks

C 172.16.27.0/30 is directly connected, GigabitEthernet2

L 172.16.27.2/32 is directly connected, GigabitEthernet2

C 172.16.27.4/30 is directly connected, GigabitEthernet1

L 172.16.27.6/32 is directly connected, GigabitEthernet1

Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router C's IP is 172.16.27.1):

Destination Prefix: 10.0.0.0

Destination Prefix Mask: 255.255.252.0

Interface: GigabitEthernet3

Install Static Route to 10.0.4.0/22 via 172.16.27.5 (assuming Router C's IP is 172.16.27.5):

Destination Prefix: 10.0.4.0

Destination Prefix Mask: 255.255.252.0

Interface: GigabitEthernet1

Install Static Route to 10.0.6.0/24 via 172.16.27.2 (assuming Router A's IP is 172.16.27.2):

Destination Prefix: 10.0.6.0

Destination Prefix Mask: 255.255.255.0

Interface: GigabitEthernet2

Install Static Route to 10.0.0.0/22 via 172.16.27.1 (assuming Router B's IP is 172.16.27.1):

Destination Prefix: 10.0.0.0

Destination Prefix Mask: 255.255.252.0

Interface: GigabitEthernet1

Summary of Static Routes:

Router A:

ip route 10.0.0.0 255.255.252.0 GigabitEthernet3

Router B:

ip route 10.0.4.0 255.255.252.0 GigabitEthernet1

Router C:

ip route 10.0.6.0 255.255.255.0 GigabitEthernet2

ip route 10.0.0.0 255.255.252.0 GigabitEthernet1

These configurations ensure that each router knows the correct paths to reach Workstation A and File Server 2, resolving the connectivity issue.