Pass the USGBC Leadership in Energy and Environmental Design (LEED) LEED-Green-Associate Questions and answers with CertsForce

Developing a construction purchasing policy is a strategy that promotes sustainable purchasing during construction. A construction purchasing policy is a document that outlines the criteria and requirements for selecting materials, products, and services that have lower environmental impacts and support human health during construction. A construction purchasing policy can address issues such as recycled content, regional materials, certified wood, low-emitting materials, rapidly renewable materials, durability, life cycle assessment, waste reduction, and indoor air quality. The other options are not strategies that promote sustainable purchasing during construction. Specifying green electronic equipment is relevant for operations purchasing, not construction purchasing. Reducing regional materials expense by 10% does not necessarily imply sustainable purchasing, as regional materials may have higher or lower environmental impacts depending on their source and transportation methods. Implementing an erosion and sedimentation plan is a strategy that protects water quality during construction, but does not address sustainable purchasing. References: LEED Green Associate Candidate Handbook, page 24; USGBC, [Guide to LEED Certification: Commercial], page 12.

Green Cleaning is a plan that is implemented after occupancy to ensure that the building is maintained in a way that reduces the environmental and health impacts of cleaning products, equipment, and practices. Green Cleaning is part of the LEED v4 Operations and Maintenance rating system, and it includes credits for purchasing sustainable cleaning products and materials, using green cleaning equipment, implementing an indoor integrated pest management program, and developing a green cleaning policy1.

LEED v4: Operations and Maintenance Guide1, pages 36-41

One of the values and benefits of building green is that it will enhance the health of the building occupants. Building green is a process that incorporates environmental considerations into every stage of a building’s life cycle, from design to construction to operation to end-of-life. Building green can improve the indoor environmental quality (IEQ) of a building, which is the physical and psychological conditions of the indoor spaces that affect the health, comfort, and productivity of the occupants. Building green can enhance IEQ by using low-emitting materials, providing adequate ventilation, controlling temperature and humidity, optimizing daylighting and lighting quality, reducing noise levels, and promoting occupant well-being12. References: LEED v4 Green Associate Candidate Handbook1, LEED v4 BD+C Reference Guide2

Drip irrigation is a method of watering plants that delivers water directly to the roots through a network of pipes, tubes, valves, and emitters. Drip irrigation is not a plumbingfixture, but a landscaping technique that can reduce outdoor water use by minimizing evaporation, runoff, and overspray12.

Plumbing fixtures are devices that provide water for various purposes, such as washing, bathing, cooking, or flushing. Plumbing fixtures include urinals, showerheads, kitchen faucets, and other types of faucets, toilets, bidets, and sinks. Plumbing fixtures are subject to indoor water use reduction strategies in LEED certification, such as installing low-flow or high-efficiency models, using automatic sensors or timers, or implementing water reuse systems34.

Setting project goals is the action that the design team should conduct first in order to incorporate green building strategies in a six-story commercial building renovation project. Setting project goals is an important step in the integrative process that defines the vision and expectations for the project’s sustainability performance and guides the decision-making throughout the design and construction phases. Setting project goals involves engaging key stakeholders, such as owners, users, designers, contractors, and operators, and identifying measurable objectives, targets, and metrics for various aspects of green building, such as energy efficiency, water conservation, material selection, indoor environmental quality, site selection, and transportation access. The LEED Green Associate Candidate Handbook states that one of the steps in the integrative process is to “establish sustainability goals early in project development” [1, p. 12]. References: LEED Green Associate Candidate Handbook, [Integrative Process | U.S. Green Building Council]

A list of materials to be diverted from disposal is a component of a construction waste management plan. A construction waste management plan is a document that outlines the goals, procedures, and responsibilities for diverting construction and demolition waste from landfills or incinerators. A list of materials to be diverted from disposal identifies the types and quantities of materials that can be recycled, reused, salvaged, or donated, as well as the destinations and methods for diversion. The other options are not components of a construction waste management plan. Projected cost savings from diverting waste is a potential benefit of implementing a construction waste management plan, but it is not a required component. Quantity of waste generated from excavated soil is a factor that affects the construction waste generation rate, but it is not a component of a construction waste management plan. Distance of the recycling facility from the project site is a factor that affects the transportation emissions and costs associated with diverting waste, but it is not a component of a construction waste management plan. References: LEED Green Associate Candidate Handbook, page 28; USGBC, [Materials and Resources], page 3.

According to LEED guidelines:

“Integrated Project Delivery phases: Pre-Design, Design, Bidding, Commissioning, Occupancy”

Commissioning aligns with these project phases for quality assurance and system verification.

EPA’s ENERGY STAR Portfolio Manager is a no-cost, interactive energy management tool that allows you to securely track and assess energy and water consumption across your building portfolio12. You can use Portfolio Manager to benchmark your building’s performance, set investment priorities, verify savings, and apply for ENERGY STAR certification23. Portfolio Manager does not measure embodied energy, which is the total amount of energy required to produce, transport, and install building materials.

 Volatile organic compounds (VOCs) are compounds that have a high vapor pressure and low water solubility, and are emitted as gases from certainsolids or liquids1. VOCs include a variety of chemicals, some of which may have short- and long-term adverse health effects2. Concentrations of many VOCs are consistently higher indoors (up to ten times higher) than outdoors2. VOCs are emitted by a wide array of products, such as paints, solvents, cleaners, fuels, pesticides, building materials, office equipment, etc2. Breathing VOCs can irritate the eyes, nose andthroat, can cause difficulty breathing and nausea, and can damage the central nervous system and other organs3. Some VOCs can cause cancer3. Therefore, VOCs negatively impact the quality of indoor air, which is option B.

A flush-out is a process that is conducted prior to building occupancy and removes indoor airborne contaminants by thoroughly exhausting old air and replacing it with fresh outdoor air. A flush-out is one of the options for achieving the LEED Indoor Air Quality Assessment credit, which aims to reduce indoor air quality problems resulting from construction or renovation and promote the comfort and well-being of occupants1. A flush-out requires that the building be supplied with a total air volume of 14,000 cubic feet of outdoor air per square foot of gross floor area while maintaining an internal temperature of at least 60°F and no higher than 80°F and relative humidity no higher than 60%. The flush-out can be done before or during occupancy, but the latter option requires a minimum ventilation rate and duration2. A flush-out can help to remove volatile organic compounds (VOCs), particulate matter (PM), and other pollutants that may be emitted from construction materials, finishes, furnishings, and equipment3.