Pass the Huawei HCIP-Datacom H12-821_V1.0 Questions and answers with CertsForce

Comprehensive and Detailed In-Depth Explanation:

OSPF-to-BGP route redistributiondoesnot allow modification of MED valuesdirectly using aroute-policyin Huawei devices.

Instead,MED can be set using a BGP attribute policy, not through the import command.

All other options (B, C, D) are correct:

B→ Route-policycan filter imported direct routes.

C→ network commanddoes not modify attributes, only announces existing routes.

D→ peer commandcan set Local Preferencevia route-policy.

????Reference:Huawei HCIA-Datacom Study Guide, BGP Route Policy and Attribute Modification.

To compress the IPv6 address 2001:0DB8:0000:C030:0000:0000:09A0, the following rules are applied:

Remove leading zeros in each hextet (e.g., 0DB8 becomes DB8).

Replace contiguous blocks of zeros with :: (only once in the address).Thus, the compressed form is 2001:DB8:0:C030::9A0 ​.

In OSPF (Open Shortest Path First), each router maintains aLink-State Database (LSDB), which must be synchronized with other routers in the same area. When an OSPF router receives anLSA (Link-State Advertisement)that it doesnot already have in its LSDB, it takes the following steps:

It updates its LSDB with the new LSA.

It floods the LSA to all its other OSPF neighbors (except the one from which it received the LSA).

This ensures that all routers in the OSPF area eventually converge to the same network topology.

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“When an LSA is received and it is newer or not present in the LSDB, the router updates the LSDB and floods the LSA to other neighbors to ensure database synchronization.”

(Chapter: OSPF Fundamentals – Section: LSDB Synchronization)

The mandatory parameters for BGP peer configuration are the peer IP address (peer ip-address) and AS number (as-number). A password is optional for MD5 authentication, and a description is an optional comment for reference. These are not required for establishing the peer relationship ​.

Comprehensive and Detailed Step-by-Step Explanation:

HSB (Hot Standby Backup) Service:

HSB is used on WLAN controllers to back up critical information in real time to a backup device, ensuring service continuity in case of failures.

Backed-Up Information:

CAPWAP Tunnel Information (A):Essential for maintaining connections between APs and controllers.

AP Entries (C):Information about connected APs is backed up.

User Data Information (D):Includes client authentication and session details.

Incorrect Option:

DHCP Address Information (B):Not part of HSB's responsibilities, as DHCP is handled separately.

The defaultSTP priorityon Huawei switches (and in the IEEE standard) is32768.

Lower priority values increase the likelihood of a switch becoming the root bridge. You can configure this value in increments of 4096.

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“The default bridge priority of Huawei switches is 32768. The root bridge is elected based on the lowest bridge ID, which consists of the priority and MAC address.”

(Chapter: Spanning Tree Protocols – Section: RSTP and Bridge Election)

The virtual MAC address for a VRRP virtual router is determined by the formula00-00-5E-00-01-[VRID in hexadecimal]. For VRID 3, the hexadecimal equivalent is03. Thus, the virtual MAC address is00-00-5E-00-01-03​.

Comprehensive and Detailed Step-by-Step Explanation:

OSPF Route Summarization:

Route summarization combines multiple specific routes into a single summary route. This reduces the number of LSAs advertised between OSPF areas, especially Type 3 LSAs.

Benefits of Route Summarization:

Reduces the size of the OSPF database and routing table.

Minimizes the processing overhead on routers by decreasing the number of routing entries.

Improves the scalability of the OSPF network.

ASBR Function:

The ASBR advertises external routes into OSPF and can summarize routes at area boundaries or during redistribution.

Comprehensive and Detailed Step-by-Step Explanation:

Default OSPF Hello Timer:

The OSPF Hello timer is used to send periodic Hello packets and maintain neighbor relationships.

Default Hello timers:

Broadcast and P2P:10 seconds

NBMA and P2MP:30 seconds

Network Types Using 30s Hello Time:

P2MP (C):OSPF sends Hello packets every 30 seconds by default.

NBMA (D):OSPF also uses 30 seconds for NBMA networks.

When two BGP peers negotiate the Hold Time, the shorter value between the two configured Hold Time values is selected. This ensures compatibility and maintains the stability of the BGP session ​.