Pass the Huawei HCIP-Datacom H12-821_V1.0 Questions and answers with CertsForce

 Additional Port Roles in MSTP

Master Port: Indicates the port on the shortest path to the root bridge in a region.

Regional Edge Port: Identifies a port at the boundary of the MST region.

Backup and edge ports exist in RSTP and are not newly introduced by MSTP.

 HCIP-Datacom-Core Reference

MSTP port roles are elaborated in the MSTP configuration sections​​.

Comprehensive and Detailed Step-by-Step Explanation:

Firewall Session Table:

A session table is used to track active sessions. If a session remains idle for longer than the configured aging time, it is removed to free resources and enhance security.

TCP Session Timeout:

If the interval between two packets exceeds the session timeout, the firewall deletes the session information, requiring the session to be re-established.

The LS age field in OSPF LSAs (Link State Advertisements) is measured in seconds and increments over time in the Link State Database (LSDB). If the LS age reaches the LSRefreshTime (30 minutes), the router that originated the LSA must regenerate it to keep the LSA valid in the network. Options C and B are incorrect since LS age does not decrease, and only the originator regenerates LSAs ​.

The error indicates "Incorrect remote AS," which refers to a mismatch in the autonomous system (AS) numbers during BGP peer configuration. This issue is unrelated to the neighbor address. The neighbor address (10.1.1.5) and timestamp (2010-03-22 12:40:39) provided in the output are correct, and the error type confirms a neighbor relationship issue ​.

Comprehensive and Detailed Step-by-Step Explanation:

1. Overview of AS_Path Attribute Modification:

The apply as-path command in a route-policy is used to modify the AS_Path attribute of routes. This is often required to influence the selection of routes or to adjust routing policies for incoming or outgoing BGP updates.

2. Parameters of the apply as-path Command:

Option A: Delete

Correct.

The delete parameter removes specific AS numbers from the AS_Path attribute. This is used to simplify or manipulate the AS_Path for specific routing policies.

Option B: Additive

Correct.

The additive parameter appends an AS number to the existing AS_Path attribute, instead of overwriting it. This is useful when you want to prepend AS numbers to influence route selection without removing the original AS_Path.

Option C: Copy

Incorrect.

The copy parameter is not supported in the apply as-path command for modifying AS_Path attributes.

Option D: Overwrite

Correct.

The overwrite parameter replaces the existing AS_Path with a new one. This provides complete control over the AS_Path attribute but removes the original AS_Path entirely.

3. Summary:

The valid parameters for the apply as-path command are delete, additive, and overwrite.

Huawei HCIA-Datacom Study Guide, Chapter "BGP Route Policies."

BGP Attribute Modification in Huawei Documentation.

Comprehensive and Detailed in-depth Step-by-Step Explanation:

TheNetwork Entity Title (NET)is a unique identifier assigned to an IS-IS router. It is derived from theNetwork Service Access Point (NSAP)address and consists of the following components:

Area Address:

Identifies the area in which the router resides.

Multiple routers in the same IS-IS area must have the same area address.

System ID:

Uniquely identifies the router within the IS-IS area.

The System ID is typically derived from the router's loopback IP address or another unique value.

SEL (Selector Field):

The SEL field is always set to00for IS-IS NETs.

The NET is used by IS-IS for route calculation and to identify the router within the IS-IS domain. Therefore, the statement isTRUE.

 Understanding Router ID and Its Role in OSPF:

In OSPF, the Router ID uniquely identifies a router within the OSPF domain. If two routers are configured with the same Router ID, it can lead to issues such as LSA conflicts and flapping. This is because the Router ID is used as a key in OSPF operations, including LSA generation and database synchronization.

HCIP-Datacom-Core Technology Training Material (OSPF Basics - Router ID and LSA Handling)​.

 Scenario Details:

Different Areas: Even if the two routers belong to different areas, the Router ID remains globally significant in the OSPF domain. This means that any duplication of Router IDs will confuse OSPF mechanisms.

ASBR (Autonomous System Boundary Router): When one of the routers is an ASBR, it generates Type 4 and Type 5 LSAs to describe external routes. These LSAs use the Router ID asan identifier. If another router in the network has the same Router ID, conflicts occur during LSDB synchronization.

The Forwarding Information Base (FIB) is derived from the router's routing table and contains the exact forwarding entries used to route packets. It directly guides packet forwarding decisions by matching incoming packets with the correct output interface or next-hop address ​.

Comprehensive and Detailed Step-by-Step Explanation:

1. What is a Firewall Session?

A firewall session is an entry used to maintain the connection state of a protocol.

When a packet is forwarded, the firewall creates a session for it and tracks subsequent packets for the same connection to ensure efficient forwarding and security enforcement.

2. Analysis of Each Option:

Option A: Subsequent fragment

Incorrect.

A session is created for the initial fragment of a packet. Subsequent fragments are matched to the existing session and do not trigger the creation of a new session.

Option B: ICMP error packet

Incorrect.

ICMP error packets (e.g., Destination Unreachable) are considered exceptions and do not create new sessions.

Option C: GRE (Generic Routing Encapsulation)

Correct.

GRE is a tunneling protocol that encapsulates packets. A firewall creates a session for GRE traffic to track the state of the encapsulated connection.

Option D: TCP (Transmission Control Protocol)

Correct.

TCP is a connection-oriented protocol, and firewalls create sessions for TCP connections to track their state (e.g., SYN, SYN-ACK, FIN).

3. Summary:

The firewall creates sessions forGREandTCPprotocols.

A stateful inspection firewall tracks the state of active connections. If a packet matches an existing session in the firewall's state table, it is allowed to pass. The diagram indicates that the TCP packet matches the session state, so the firewall forwards it ​.