Pass the CWNP CWNA CWNA-109 Questions and answers with CertsForce

Fade Margin is an additional pad of signal strength designed into the RF system to compensate for unpredictable signal fading. It is the difference between the receiver’s sensitivity and the actual received signal level. A higher Fade Margin indicates a more robust link that can withstand interference, attenuation, or other factors that may reduce the signal strength. A lower Fade Margin means that the link is more susceptible to failure or performance degradation. Fade Margin is usually expressed in decibels (dB) and can be calculated by subtracting the receiver sensitivity from the received signal level. References: 1, Chapter 2, page 51; 2, Section 2.1

DHCP (Dynamic Host Configuration Protocol) is a commonly used method to locate the controllers by the APs in a WLAN that is implemented using wireless controllers. DHCP is a protocol that allows a device to obtain an IP address and other network configuration parameters from a server. In a wireless controller scenario, the APs can use DHCP to request an IP address from a DHCP server, which can also provide the IP address or hostname of the wireless controller as an option in the DHCP response. This way, the APs can discover the wireless controller and establish a connection with it. Alternatively, the APs can also use other methods to locate the wireless controller, such as DNS (Domain Name System), broadcast or multicast discovery, or manual configuration. References: 1, Chapter 8, page 309; 2, Section 5.2

A common feature of MDM solutions that can be used to protect enterprise data on mobile devices is containerization. Containerization is a technique that creates a separate and secure environment on the mobile device where enterprise data and applications are stored and accessed. Containerization isolates the enterprise data from the personal data and prevents unauthorized access, leakage, or loss of sensitive information. Containerization can also enforce security policies, encryption, authentication, and remote wipe on the enterprise data and applications. Over-the-air registration, onboarding, and self-registration are features of MDM solutions that facilitate the enrollment and management of mobile devices, but they do not directly protect enterprise data on mobile devices. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 336; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 326.

The final step in an effective troubleshooting process is to document the results. Documentation is essential for keeping track of the problem history, the actions taken, the solutions implemented, and the outcomes achieved. Documentation can also help to prevent future problems, improve best practices, and provide feedback for improvement. Documentation should include relevant information such as problem description, symptoms, root cause analysis, resolution steps, verification methods, and lessons learned. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 513; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 483.

An advantage of using WPA3-Personal instead of WPA2-Personal as a security solution for 802.11 networks is that WPA3-Personal, also called WPA3-SAE, uses a stronger authentication exchange to better secure the network. WPA3-Personal uses Simultaneous Authentication of Equals (SAE) as the key exchange protocol, which provides stronger protection against offline dictionary attacks and password guessing than WPA2-Personal. SAE uses a Diffie-Hellman key exchange with elliptic curve cryptography (ECC) to establish a pairwise master key (PMK) between the AP and the client without revealing it to any eavesdropper. SAE also provides forward secrecy, which means that if one PMK is compromised, it does not affect the security of other PMKs. WPA2-Personal uses Pre-Shared Key (PSK) as the key exchange protocol, which is vulnerable to offline brute-force attacks if the passphrase is weak or leaked. Both WPA3-Personal and WPA2-Personal use AES for encryption, so there is no difference in that aspect. WPA3-Personal does not use a different encryption algorithm than WPA2-Personal, but rather a different key exchange protocol. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 307; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 297.

 A Wi-Fi scanner is a basic tool that can be used to easily locate areas of high co-channel interference. A Wi-Fi scanner is a software application that can run on a laptop, tablet, smartphone, or other device that has a Wi-Fi adapter. A Wi-Fi scanner can scan the wireless environment and display information about the detected access points and client stations, such as their SSID, BSSID, channel, signal strength, security, and data rate. A Wi-Fi scanner can also show the channel utilization and overlap of different access points, which can indicate the level of co-channel interference. Co-channel interference is a type of interference that occurs when multiple access points use the same or adjacent channels within the same coverage area. Co-channel interference can reduce the throughput and performance of the WLAN, as the access points and client stations have to contend for the channel access and avoid collisions. To identify areas of high co-channel interference, a Wi-Fi scanner can be used to measure the signal strength and channel utilization of different access points and compare them with a threshold or a baseline. Alternatively, a Wi-Fi scanner can also use a color-coded heat map to visualize the co-channel interference level in different locations. References: 1, Chapter 7, page 279; 2, Section 4.3

The common spectrum analyzer view that you should use for this analysis is the Waterfall/Spectrogram view. The Waterfall/Spectrogram view shows the signal from the interfering device over time on a three-dimensional graph. The x-axis represents frequency, the y-axis represents time, and the z-axis represents amplitude or power. The color of each pixel indicates the signal strength at a given frequency and time. The Waterfall/Spectrogram view can help you identify the characteristics of the interference source, such as its frequency range, duty cycle, modulation type, and pattern. References: [CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 524; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 494.