Pass the CWNP CWDP Wi-Fi Design CWDP-305 Questions and answers with CertsForce

Comprehensive and Detailed Explanation:

In the final meeting after successfully implementing a WLAN infrastructure, it is essential to have the acquirer and key stakeholders from the customer side present. The acquirer is typically the individual or group responsible for procuring the WLAN solution, while stakeholders include those who have an interest in the project's success, such as IT managers, network administrators, and department heads. Their presence ensures that the implementation aligns with the organization's requirements and expectations, and it provides an opportunity to address any concerns or questions before project closure.

Received Signal Strength Indicator (RSSI) is a metric that measures the power level of a received radio signal.In the context of location-based services within wireless networks, RSSI-based localization is known for its simplicity, as it doesn't require additional hardware or complex algorithms.However, this simplicity comes at the cost of accuracy.RSSI measurements can be significantly affected by environmental factors such as multipath propagation, obstacles, and signal interference, leading to less precise location estimations compared to other methods like AoA, ToA, or TDoA.Wray Castle

Wi-Fi Multimedia (WMM) is a subset of the IEEE 802.11e standard and is essential for enabling Quality of Service (QoS) features in Wi-Fi networks. When WMM is not enabled on an 802.11n WLAN, QoS features are unavailable, which can adversely affect the performance of latency-sensitive applications such as voice over IP (VoIP) and video streaming.گروه آموزشی و پژوهشی سیب

Additionally, certain 802.11n features, like higher data rates and frame aggregation, may not be fully utilized without WMM, leading to suboptimal network performance.

Manual identification of radar pulses using spectrum analysis charts can be challenging because radar signals often have low amplitude at the Wi-Fi receiver, making them difficult to detect visually.This limitation can lead to inaccurate assessments of DFS channel availability.Automated detection methods or using the actual WLAN equipment intended for deployment may provide more reliable results.

Comprehensive and Detailed Explanation:

Real-Time Location Systems (RTLS) utilize various technologies to track and locate assets or individuals in real-time. The methods include:

A. Sound:Ultrasonic sensors can be used for location tracking by measuring the time it takes for sound waves to travel between devices.

B. 802.11-capable laptops:Wi-Fi-based RTLS can leverage existing 802.11 infrastructure and devices to determine location based on signal strength and triangulation.

C. Active RFID:Active RFID tags have their own power source and can transmit signals to readers, allowing for real-time tracking over longer distances.

D. Infrared:Infrared sensors can be used for location tracking, especially in environments where line-of-sight is available.

F. UWB (Ultra-Wideband):UWB technology provides high-precision location tracking by transmitting signals over a wide frequency spectrum.

G. Passive RFID:Passive RFID tags do not have their own power source and are activated by the electromagnetic field of a reader, suitable for tracking items in close proximity.

E. UHV:Ultra-High Voltage (UHV) is not a technology used in RTLS and is therefore not applicable.

Comprehensive and Detailed Explanation:

In warehouse environments, physical changes can significantly impact WLAN performance. Over time, the addition or rearrangement of inventory (e.g., pallets, shelving) can alter RF propagation, leading to coverage gaps or interference. Therefore, it's essential to inquire about any inventory changes that may have occurred since the initial installation.

Other Options:

A.DHCP lease exhaustion typically affects IP address assignment but is less likely to cause location-specific WLAN issues.

B.Changes in receive gain are hardware-related and less common unless equipment has been replaced or reconfigured.

D.While rogue APs can cause interference, they usually affect broader areas and are less likely to cause isolated issues unless specifically deployed nearby.

Before integrating an access point (AP) into a production environment, it's imperative to apply a baseline configuration. This configuration ensures that the AP adheres to the organization's security policies and network standards, mitigating potential vulnerabilities upon deployment. Implementing a baseline configuration aids in maintaining network integrity and simplifies future troubleshooting.

Comprehensive and Detailed Explanation:

After implementing a WLAN infrastructure, it's essential to provide the customer with comprehensive documentation.This includes digital or physical assets, user guides, floorplans indicating AP placements, and configuration documents detailing network settings.These deliverables ensure the customer can manage, maintain, and troubleshoot the WLAN effectively.Reddit

If the number of APs changes due to budget constraints, a complete redesign is required to reevaluate coverage, capacity, and performance expectations. Increasing transmit power or relying on 2.4 GHz is not a valid solution, as it can result in co-channel interference and poor roaming.

From CWDP-305:

“A design is based on specific coverage and capacity requirements. Any major change, such as reducing the number of APs, requires a full redesign to determine the impact and ensure that business requirements can still be met.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Wireless Design Process

Comprehensive and Detailed Explanation:

An incorrect Frame Check Sequence (FCS) indicates that the frame was corrupted during transmission. This corruption can be due to various factors, but in the context of a WLAN, common causes include multipath interference and excessive collisions. Multipath occurs when RF signals reflect off surfaces and arrive at the receiver at different times, causing interference. Excessive collisions can happen in environments with high device density or overlapping coverage areas, leading to degraded performance.