Pass the CWNP CWDP Wi-Fi Design CWDP-305 Questions and answers with CertsForce

Once the WLAN is validated and operational, the next step is knowledge transfer. Support staff must be trained on monitoring, troubleshooting, and configuration, while end-users benefit from understanding basic usage and policies. Executives and guests are not directly involved in daily operations.

From CWDP-305:

“Training should be delivered to IT support staff responsible for WLAN operations, and optionally to end-users for user-side clarity. This ensures ongoing support, proper use, and reduced downtime.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Post-Design ValidationandTroubleshooting

Comprehensive and Detailed Explanation:

Real-Time Protocol (RTP) is used for delivering audio and video over IP networks. Excessive retransmissions of RTP frames indicate that packets are being lost or corrupted, prompting the sender to resend them. To mitigate this, the transmitting station may lower its data transmission rate to improve reliability, which can adversely affect the quality of the voice or video stream.

Achieving a 450 Mbps data rate in 802.11n requires specific features:

Short Guard Interval (GI):Reduces the interval between symbols from 800 ns to 400 ns, increasing throughput.

40 MHz Channels:Doubles the channel width compared to 20 MHz, allowing more data to be transmitted.

3 Spatial Streams:Utilizes multiple antennas to transmit separate data streams simultaneously, significantly boosting data rates.

While frame aggregation and transmit beamforming enhance performance and reliability, they are not prerequisites for achieving the 450 Mbps MCS rate.

EAP-TTLS (Extensible Authentication Protocol - Tunneled Transport Layer Security) is an authentication protocol that allows the use of client credentials (such as usernames and passwords) while requiring a server-side certificate. Client-side certificates are optional, making it a flexible solution for environments where deploying certificates to all clients is impractical. This method establishes a secure tunnel between the client and server, ensuring that credentials are protected during the authentication process.

RSSI (Received Signal Strength Indicator):Higher RSSI indicates stronger signal reception.

Noise Floor:Lower noise floor improves clarity of communication.

SNR (Signal-to-Noise Ratio):A high SNR is required for good throughput and reliability.

A well-designed WLAN will have:

High RSSI (strong signal)

Low Noise Floor (less interference)

High SNR (clear distinction between signal and noise)

From CWDP-305:

“A strong, clean signal (high RSSI, low noise) results in higher SNR, which directly correlates with better performance and fewer retransmissions.”

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Post-Design ValidationandTroubleshooting

Site survey adapters are often specialized devices with enhanced sensitivity and performance characteristics compared to standard client Wi-Fi adapters.These specialized adapters can detect weaker signals and provide more detailed RF information, leading to higher RSSI readings during surveys.Consequently, standard client devices may experience lower RSSI values in the same environment.

The CWDP-305 Official Study and Reference Guide notes:MetaGeek Community

"Survey adapters are typically more sensitive than standard client devices, which can result in discrepancies between survey data and actual client experiences."

Comprehensive and Detailed Explanation:

In wired networks, VLANs effectively segment traffic into separate broadcast domains, isolating traffic between different VLANs. However, in wireless networks, while VLANs are used to assign different SSIDs to different VLANs, the wireless medium is inherently shared. This means that, despite VLAN assignments, all wireless traffic is transmitted over the same RF medium, and clients can still hear all transmissions. Therefore, wireless VLANs do not always provide the same level of traffic segmentation as wired VLANs.

Comprehensive and Detailed Explanation:

IEEE 802.3at, also known as PoE+, provides up to 25.5 watts of power per port. To support 6 access points requiring PoE+ power:

25.5 W/AP × 6 APs = 153 W

Considering some overhead for power loss and future scalability, a minimum PoE budget of 180 W is recommended to ensure reliable operation.

IEEE 802.3at (PoE+) provides up to 30 watts of power per port. To determine how many devices can be supported with a total budget of 740 W:

740 W ÷ 30 W per device = 24.67

However, due to real-world power overheads and cable losses, it's safe to estimate each device may draw up to ~25–30 W. Most vendors recommend a planning budget of around 25–28 W per 802.3at device.

Safe calculation using full 30 W:

740 ÷ 30 = 24.6 → you could theoretically power 24, but for guaranteed power availability considering margin, most designs plan for:

740 ÷ 40 = 18.5 → about 18 devices conservatively

Answer: 18 devices can certainly be powered.

— Reference: CWDP-305 Official Study and Reference Guide, Chapter on Infrastructure Design

Comprehensive and Detailed Explanation:

The 5 GHz band offers more non-overlapping channels and is less susceptible to interference compared to the 2.4 GHz band. By moving corporate data clients and VoWiFi devices to the 5 GHz band, the network can achieve better performance and reduced interference, especially for latency-sensitive applications like voice over Wi-Fi.