Pass the Cisco CCDE v3.0 400-007 Questions and answers with CertsForce

A (Distinguishing between config and operational data):NETCONF was designed to provide structured data models (such as YANG), clearly separating configuration from operational state data. SNMP lacks this built-in distinction and generally treats all data as MIB objects.

Other options explained:

B/C/D: Both protocols can perform actions and retrieve or modify data, but only NETCONF natively differentiates config vs. operational state.

D (Neighbor Discovery):Control plane actions manage routing and signaling, such as ND discovering routers in IPv6. The control plane manages state and network intelligence, while data plane performs forwarding.

Other options explained:

A/B/C: These describe data plane forwarding operations.

OSPF throttling timers control the pacing and frequency of SPF calculations and LSA generation. They help strike a balance between fast convergence and control-plane stability. The key timers include:

LSA generation throttling (min/max interval between LSA originations)

SPF calculation throttling (delays between consecutive SPF runs)

By tuning these timers, network designers can:

Prevent CPU overload caused by rapid or repeated LSA updates due to flapping links

Smooth out instability while still enabling responsive convergence

This approach aligns with CCDE v3.1 under “Protocol Design Implications” for optimizing IGP behavior in large, dynamic topologies.

==========

A picture containing table Description automatically generated

B (OTV — Overlay Transport Virtualization): Allows Layer 2 extension across data centers while maintaining fault isolation by not extending STP across the WAN. Control plane handles MAC learning, which provides stability and loop avoidance between data centers.

Why other options are incorrect:

A: FabricPath is mainly for intra-data center Layer 2 fabric.

C: Advanced VPLS extends Layer 2 but carries STP across the WAN.

D: LISP operates at Layer 3, not for Layer 2 extension.

E: TRILL also focuses on intra-DC Layer 2 but not DCI fault isolation.

—

A (IaaS within a private cloud):IaaS allows on-demand scaling of compute and storage resources, and private cloud deployment reduces capital expenditures by pooling hardware resources and increasing utilization, while allowing control over security and compliance.

Other options explained:

B: On-prem IaaS still requires significant CapEx.

C: PaaS delivers platform services, but the scenario is focused on network systems.

D: SaaS on-prem is uncommon and does not address infrastructure scaling.

Just-in-time (JIT) manufacturing relies on precision timing and real-time data exchanges between production systems and external suppliers. Network latency can directly impact the efficiency and viability of such a system. For this reason, the architect must prioritize a network design that ensures minimal delay and rapid delivery of application and sensor data.

According to CCDE v3.1 design principles, when latency is tied directly to business outcomes (e.g., manufacturing workflow dependencies), the network must be designed with a focus on:

End-to-end low-latency infrastructure

Predictable jitter and delay control

Application prioritization mechanisms (QoS)

High availability and redundancy

This allows the manufacturer to optimize production throughput while reducing delays caused by communication lag with external component providers.

Why other options are incorrect:

A. Automation helps with operational efficiency, but it does not directly ensure low-latency communication.

B. Zero Trust is a security model, not latency-related.

D. Modularity is about design structure, not latency performance.

==========