Weekend Sale Special Limited Time 75% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: CFsave75

Pass the Cisco CCNP Collaboration 350-801 Questions and answers with CertsForce

Viewing page 8 out of 15 pages
Viewing questions 71-80 out of questions
Questions # 71:

Which configuration on Cisco UCM is required for SIP MWl to work?

Options:

A.

Assign an MWl extension on the mailbox.


B.

The line partition must be inside the inbound CSS assigned to the CUC SIP trunk.


C.

The line partition must be inside the rerouting CSS assigned to the Cisco Unity Connection SIP trunk.


D.

Set the " Enable message waiting indicator " on the port group.


Expert Solution
Questions # 72:

Where is it recommended to enforce the QoS trust boundary on a network?

Options:

A.

LAN access ingress and the WAN access ingress


B.

LAN access egress


C.

LAN access ingress


D.

LAN access egress and the WAN access egress


Expert Solution
Questions # 73:

End users report bad video quality and voice choppiness on Cisco Collaboration endpoints. The engineer changed the device pool the users were in but did not correct the problem. Which action should be taken to troubleshoot this issue?

Options:

A.

Use direct IP address calls between two endpoints to troubleshoot call quality issues.


B.

Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher.


C.

Check for duplex/speed mismatches between the network port settings of the system and network switch.


D.

Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to " false " .


Expert Solution
Questions # 74:

What is an advantage of using Cisco Webex Control HuB?

Options:

A.

enables the provisioning, administration, and management of Webex services and Webex Hybrid Services


B.

brings Video, audio, and web communication together to meet the collaboration needs of the modern workplace


C.

provides streamlined communication and collaboration for a hybrid workforce


D.

offers easy contact management, centralized administration, and centralized configuration management


Expert Solution
Questions # 75:

Question # 75

What is a possible cause of the PRI issue?

Options:

A.

The cable is unplugged.


B.

The controller shut down.


C.

The clock source is incorrect.


D.

The framing is configured incorrectly.


Expert Solution
Questions # 76:

Question # 76

Refer to the exhibit. A collaboration engineer adds a redundant NTP server to an existing Cisco Collaboration solution On the Cisco UCM OS Administration page, the new NTP server shows as " Not Accessible " Which action resolves this issue?

Options:

A.

Restart NTPD on the Cisco UCM server.


B.

Delete and re-add the new NTP server via the Cisco UCM command-line interface


C.

Start the NTP service on the new NTP server


D.

Configure the " reach " value as " 377 " for the new NTP server.


Expert Solution
Questions # 77:

Which two steps should be taken to provision a phone after the Self-Provisioning feature was configured for end users? (Choose two.)

Options:

A.

Ask the Cisco UCM administrator to associate the phone to an end user.


B.

Plug the phone into the network.


C.

Dial the hunt pilot extension and associate the phone to an end user


D.

Dial the self-provisioning IVR extension and associate the phone to an end user.


E.

Enter settings menu on the phone and press * ,*,# (star, star, pound).


Expert Solution
Questions # 78:

What are two features of Cisco Expressway that the customer gets if Expressway-C and Expressway-E are deployed?(Choose two.)

Options:

A.

highly secure real-traversal technology to extend organizational reach.


B.

additional visibility of the edge traffic in an organization.


C.

complete endpoint registration and monitoring capabilities for devices that are local and remote.


D.

session-based access to comprehensive collaboration for remote workers, without the need for a separate VPN client.


E.

utilization and adoption metrics of all remotely connected devices.


Expert Solution
Questions # 79:

An administrator uses the Cisco Unified Real-Time Monitoring Tool to investigate recent calls on a Cisco UCM cluster. The SIP trace for an on-net. direct-media call shows two 180 Ringing and two 11 BYE messages. Why are there multiples of each message type in the trace?

Options:

A.

The source phone sends a 180 Ringing signal to the Cisco UCM. which sends a 180 Ringing signal to the destination phone. The same process applies to 11 BYE messages.


B.

The source phone must signal to the destination phone that it is ringing, and the destination phone signals back with a 180 Ringing message. The same process applies to 11 BYE messages.


C.

The calls have an MTP in the call path due to different codec support. The calls are subsequently split into two call legs.


D.

The destination phone signals back to the Cisco UCM that it is ringing, and the Cisco UCM signals back to the source phone.


Expert Solution
Questions # 80:

A high-speed network is often configured with a five-class QoS model. Which classes are

used in the model?

Options:

A.

real-time, call-signaling, critical data, best-effort, and scavenger


B.

real-time, signaling, critical data, best-effort and drop-class


C.

call-signaling, real-time, critical data, best-effort, and drop-class


D.

voice, video, signaling, critical data, and best-effort


Expert Solution
Viewing page 8 out of 15 pages
Viewing questions 71-80 out of questions