Pass the ISA Cybersecurity ISA-IEC-62443 Questions and answers with CertsForce

ISA/IEC 62443 emphasizes that physical security and cybersecurity are interdependent and must complement each other to provide robust protection for industrial automation and control systems (IACS). Physical security measures (like locks, fences, access cards) protect against unauthorized physical access, while cybersecurity measures protect against digital threats. Both must work together; for example, a cyber attacker might gain physical access to a control cabinet or a physical intruder might exploit weak network security.

The ISASecure certification program, aligned with the ISA/IEC 62443 standards, defines three distinct security levels that categorize the robustness of industrial control systems against known cybersecurity threats. These levels are designed to provide a scalable approach to securing industrial automation and control systems, with each level offering a higher degree of security. The levels are typically identified as SL1 (Security Level 1), SL2 (Security Level 2), and SL3 (Security Level 3), each addressing increasingly stringent security capabilities and resilience against cyber attacks.

In ISA/IEC 62443, Target Security Protection Ratings correspond to the concept of Target Security Levels (SL-T).

Step 1: Definition of target ratings

Target ratings describe the desired level of protection that a system or zone must achieve during operation, based on risk assessment.

Step 2: Difference between target and achieved

Target ratings define what is required.

Achieved ratings (SL-A) describe what has actually been implemented and verified.

Step 3: Why Option D is correct

The target rating outlines the intended security outcome that implementation measures must fulfill during operation, not what currently exists.

Step 4: Why other options are incorrect

Actual achieved levels, cost metrics, or implementation measurements are separate concepts.

Therefore, the correct description is that they outline the desired levels of system security requirements to be fulfilled during operation.

One of the trends that has increased the security risks for industrial automation and control systems (IACS) is the integration of these systems with business and enterprise systems, such as enterprise resource planning (ERP), manufacturing execution systems (MES), and supervisory control and data acquisition (SCADA). This integration exposes the IACS to the same threats and vulnerabilities that affect the business and enterprise systems, such as malware, denial-of-service attacks, unauthorized access, and data theft. Moreover, the integration also creates new attack vectors and pathways for adversaries to compromise the IACS, such as through remote access, wireless networks, or third-party devices. Therefore, the integration of IACS with business and enterprise systems is a trend that has caused a significant percentage of security vulnerabilities. References: ISA/IEC 62443 Standards to Secure Your Industrial Control System, page 1-2.

ISO/IEC 15408, also known as the Common Criteria for Information Technology Security Evaluation, is an international standard that provides a framework for evaluating the security of IT products and systems. The purpose of the standard is to define a common set of requirements for the security functions and assurance measures of IT products and systems, and to establish a common methodology for conducting security evaluations. The standard allows users to specify their security needs and expectations in a Security Target (ST), which may be based on one or more Protection Profiles (PPs) that define security requirements for a class of products or systems. Vendors can then implement or claim compliance with the ST or PPs, and have their products or systems evaluated by independent testing laboratories against the security criteria defined in the standard. The standard also defines a scale of Evaluation Assurance Levels (EALs) that indicate the degree of confidence in the security of the evaluated product or system. The standard is intended to facilitate the development, procurement, and use of secure IT products and systems, and to promote the recognition and acceptance of evaluation results across different countries and regions. References:

ISO/IEC 15408-1:2009 - Common Criteria Evaluation for IT Security - Nemko1

Common Criteria - Wikipedia2

ISO/IEC Standard 15408 — ENISA3

ISA/IEC 62443 is explicitly lifecycle-based, requiring cybersecurity considerations to be integrated across all phases of an automation solution’s lifecycle. This includes concept, design, implementation, verification, operation, maintenance, and decommissioning.

Step 1: Lifecycle philosophy of ISA/IEC 62443

The standard recognizes that cybersecurity risks emerge and evolve throughout the system lifecycle. Addressing security in only one phase leaves gaps that attackers can exploit.

Step 2: Design and implementation are not sufficient

While secure architecture and configuration are critical, they must be supported by secure development practices, verification, operational procedures, incident response, patching, and change management.

Step 3: Operational importance

Many cybersecurity failures occur during operation due to poor maintenance, weak access control, or unmanaged changes. ISA/IEC 62443-2-1 and 3-3 explicitly address these phases.

Step 4: End-of-life considerations

Decommissioning must also be planned to ensure data, credentials, and access paths are securely removed.

Because the standard spans management (2-x), system (3-x), and component (4-x) requirements across the lifecycle, all phases must be integrated.

In ISA/IEC 62443-2-1, the Cyber Security Management System (CSMS) includes multiple categories. One of these is “Addressing Risk”, which is composed of 4 element groups, as outlined in Figure 3 – CSMS Elements of the standard.

The 4 element groups under "Addressing Risk" are:

Risk analysis and management

Security policy, organization, and awareness

Selected security countermeasures

Personnel security

“The Addressing Risk category of the CSMS consists of four element groups: risk analysis and management, security policy and awareness, selected countermeasures, and personnel security.”

— ISA/IEC 62443-2-1:2010, Figure 3 and Clause 4.2.2

A Wide Area Network (WAN) is a communications system that covers a large geographic area, such as a city, a country, or even several countries or continents1. WANs are often used to connect local area networks (LANs) and other types of networks together, so that users and computers in one location can communicate with users and computers in other locations2. WANs use various communication infrastructures, such as public telephone lines, undersea cables, and communication satellites, to transmit data over long distances1. WANs are typically established with leased telecommunication circuits or less costly circuit switching or packet switching methods2. WANs are often built by Internet service providers, who provide connections from an organization’s LAN to the Internet2. The Internet itself may be considered a WAN2. References: Hardware and network technologies - CCEA LAN and WAN - BBC, Wide area network - Wikipedia.

The Risk Analysis category contains background information that is used to identify and assess the risks associated with the cyber-physical system (CPS) under consideration. This information includes the system description, the threat model, the vulnerability analysis, the risk assessment method, and the risk acceptance criteria. The Risk Analysis category is used as an input for many other elements in the CSMS, such as the Risk ID, Risk Reduction, Risk Acceptance, and Risk Monitoring elements. The Risk Analysis category provides the basis for the risk management process and helps to ensure a consistent and systematic approach to cybersecurity in the CPS. References:

Using the ISA/IEC 62443 Standards to Secure Your Control System, page 13

[ISA/IEC 62443 Cybersecurity Fundamentals Specialist Study Guide], page 34

A demilitarized zone (DMZ) in network architecture provides indirect (controlled and monitored) access to the Internet or untrusted networks, usually by isolating publicly accessible services (like web servers) from internal control networks. This prevents direct exposure of sensitive IACS assets to external threats. While DMZs can support secure data transfer, their primary function is segmentation and indirect access.