Pass the ISA Cybersecurity ISA-IEC-62443 Questions and answers with CertsForce

Modbus, in its traditional form, lacks inherent security features. According to ISA/IEC 62443, one of the most practical ways to secure Modbus traffic is by placing it behind a firewall, which restricts access to only trusted sources and destinations. While VPNs and user access controls can add security, firewalls provide critical segmentation, which is explicitly recommended for legacy and insecure protocols like Modbus.

Cybersecurity awareness programs are most effective when tailored to the organization’s audience, are aligned with corporate policies, and are communicated regularly. ISA/IEC 62443-2-1 emphasizes the importance of ongoing cybersecurity training and awareness, customized to different user roles, as a critical factor in reducing human-related security risks.

According to the ISA/IEC 62443-2-1 standard, a review of the CSMS should be triggered by any changes that affect the cybersecurity risk of the industrial automation and control system (IACS), such as new technical controls, organizational restructuring, or security incidents1. Budgeting is not a trigger for CSMS review, unless it impacts the cybersecurity risk level or the CSMS itself2. References: 1: ISA/IEC 62443-2-1:2010, Section 4.3.3.3 2: A Practical Approach to Adopting the IEC 62443 Standards, ISAGCA Blog3

OPC Classic uses Microsoft's DCOM (Distributed Component Object Model) for communication, which dynamically opens multiple ports, making it extremely difficult to manage with firewalls.

“OPC Classic is firewall-unfriendly because DCOM requires dynamic port negotiation, making it difficult to define consistent firewall rules.”

— ISA/IEC 62443-3-3:2013, Annex A – Communication Protocols and Security Concerns

This lack of port predictability presents a significant security and operational risk, which led to the development of OPC UA, which uses fixed ports and supports encryption.

Datagram Transport Layer Security (DTLS) and Secure Sockets Layer (SSL) are both commonly used protocols for managing secure data transmission on the Internet. DTLS is a variant of SSL that is designed to work over datagram protocols such as UDP, which are used for real-time applications such as voice and video. SSL is a protocol that provides encryption, authentication, and integrity for data transmitted over TCP, which is used for reliable and ordered delivery of data. Both DTLS and SSL use certificates and asymmetric cryptography to establish a secure session between the communicating parties, and then use symmetric cryptography to encrypt the data exchanged. DTLS and SSL are widely used in web browsers, email clients, VPNs, and other applications that require secure communication over the Internet. References:

ISA/IEC 62443 Standards to Secure Your Industrial Control System, Module 3: Introduction to Cryptography, pages 3-5 to 3-7

Using the ISA/IEC 62443 Standards to Secure Your Control System, Chapter 6: Securing Communications, pages 125-126

ISA/IEC 62443 defines Security Levels (SL 0–4) based on attacker capability, motivation, and resources.

Step 1: Understanding SL 4

SL 4 is defined as protection against intentional violations using sophisticated means with extended resources. This includes highly motivated attackers, potentially well-funded and highly skilled.

Step 2: Why SL 4 applies

The question explicitly mentions:

High motivation

Extended resources

Sophisticated means

This description exactly matches the formal definition of SL 4 in ISA/IEC 62443-3-3 and 4-2.

Step 3: Why lower SLs are insufficient

SL 1–3 do not assume extended resources or the highest attacker sophistication.

Thus, SL 4 is the correct target.

ISA/IEC 62443-3-3 provides the list of Foundational Requirements (FRs) for IACS cybersecurity, mapping security controls to each FR to address risks identified during the risk assessment process. The seven FRs include: Identification & Authentication Control (IAC), Use Control (UC), System Integrity (SI), Data Confidentiality (DC), Restricted Data Flow (RDF), Timely Response to Events (TRE), and Resource Availability (RA).

At layer 4 of the OSI model, also known as the transport layer, the application that will handle a packet inside a host is identified by a TCP/UDP port number. A port number is a 16-bit integer that is assigned to a specific application or service that runs on a host. Port numbers are used to multiplex and demultiplex the data streams that are exchanged between hosts and end systems. Multiplexing is the process of combining multiple data streams into one, while demultiplexing is the process of separating one data stream into multiple ones. Port numbers are part of the header of the transport layer protocol data unit (PDU), which is called a segment for TCP and a datagram for UDP. The header contains the source port number and the destination port number, which indicate the applications that are involved in the communication. For example, if a host sends a packet to another host using the HTTP protocol, which runs on port 80 by default, the source port number would be a random number chosen by the sender, and the destination port number would be 80. The receiver would then use the destination port number to demultiplex the packet and deliver it to the HTTP application.

Port numbers are divided into three ranges: well-known ports (0-1023), registered ports (1024-49151), and dynamic or private ports (49152-65535). Well-known ports are reserved for common and standardized applications and services, such as HTTP (80), FTP (21), and SSH (22). Registered ports are assigned by the Internet Assigned Numbers Authority (IANA) to specific applications and services that request them, such as Skype (49175) and Minecraft (25565). Dynamic or private ports are not assigned by any authority and can be used by any application or service that needs them, such as ephemeral ports that are used for temporary connections.

The other options are not valid identifiers for the application that will handle a packet inside a host at layer 4 of the OSI model. A TCP/UDP application ID is not a term that is used in the OSI model or the TCP/IP model. A TCP/UDP host ID is not a term that is used in the OSI model or the TCP/IP model, and it would be more appropriate for layer 3, which is the network layer, where the host is identified by an IP address. A TCP/UDP registry number is not a term that is used in the OSI model or the TCP/IP model, and it would be more appropriate for layer 5, which is the session layer, where the registry number is used to identify a session between two hosts.

ISA/IEC 62443-2-1 emphasizes the importance of the ongoing evaluation of organizational responsibilities and training as part of continuous improvement within the CSMS. Periodic assessment ensures that personnel remain aware of their roles, are adequately trained, and that the program adapts to changes in the environment, technology, or threat landscape. The standard discourages keeping responsibilities static or expanding without control; instead, it advocates for regular reviews and updates.

An Intrusion Detection System (IDS) is a passive monitoring tool that detects unauthorized or malicious activity in networked systems. It does not block traffic (like an IPS), but rather alerts administrators to potential breaches.

“An IDS monitors network or system activities for malicious actions or policy violations and produces alerts or logs for analysis.”

— ISA/IEC 62443-3-3:2013, SR 3.2 – Detection of Security Events

It’s a core component of security monitoring and response — often paired with an Incident Response Plan (IRP) as defined in ISA/IEC 62443-2-1.

Clarification of Options:

Option A is metaphorical and not technically accurate.

Option B is false; IDS does not protect against all vulnerabilities.

Option C is incorrect; IDS does not block, only detects.

Option D is correct — it detects unauthorized access or misuse.