Pass the Huawei HCIP-Datacom H12-821_V1.0 Questions and answers with CertsForce

 BGP Keepalive Message Behavior

Keepalive messages are used to maintain the Established state of a BGP peer relationship.

The Keepalive timer determines the frequency of these messages and defaults to 60 seconds , as per the BGP specification.

 HCIP-Datacom-Core Reference

The Keepalive timer default value is covered in the BGP configuration and operational principles​​.

Option A correctly configures the DHCP relay agent (AC) to forward requests to the DHCP server using VLAN 10.

Option B correctly configures the DHCP server (AR) with the correct IP pool ( 10.1.1.0/24 ), gateway, and excluded IP addresses. The static route to 10.1.1.0 through 172.21.1.1 ensures proper routing ​.

=========

In the PIM protocol, Register Stop and Graft messages are sent with unicast destination addresses, typically to specific neighbors or RP (Rendezvous Point) routers. Other messages like Bootstrap and Assert use multicast addresses for broader dissemination across the network ​.

Intra-area route calculation in OSPF involves only Router LSAs (Type 1) and Network LSAs (Type 2). Summary LSAs (Type 3) are used for inter-area routes and do not participate in intra-area route calculation. Therefore, the statement is false ​.

LS Ack (Link State Acknowledgment) packets are used to acknowledge received LSAs and do not contain complete LSA information. Instead, they contain only the headers of LSAs being acknowledged. This contrasts with LS Update packets, which carry full LSA details. The misunderstanding of LS Ack functionality makes this statement false ​.

In OSPF (Open Shortest Path First), each router maintains a Link-State Database (LSDB) , which must be synchronized with other routers in the same area. When an OSPF router receives an LSA (Link-State Advertisement) that it does not already have in its LSDB , it takes the following steps:

It updates its LSDB with the new LSA.

It floods the LSA to all its other OSPF neighbors (except the one from which it received the LSA).

This ensures that all routers in the OSPF area eventually converge to the same network topology.

Reference from Huawei HCIP-Datacom-Core Technology Study Guide:

“When an LSA is received and it is newer or not present in the LSDB, the router updates the LSDB and floods the LSA to other neighbors to ensure database synchronization.”

(Chapter: OSPF Fundamentals – Section: LSDB Synchronization)

Comprehensive and Detailed In-Depth Explanation:

Wireless LAN (WLAN) roaming allows mobile devices (STAs) to move seamlessly between different APs without dropping connections .

Types of WLAN Roaming:

Layer 2 roaming → STAs move between APs in the same subnet without IP address changes.

Layer 3 roaming → STAs move across different subnets , requiring IP address reconfiguration (handled via DHCP or tunneling).

Since roaming prevents service interruption in large WLAN deployments, the statement is true .

???? Reference: Huawei HCIA-Datacom Study Guide, WLAN Roaming and Seamless Connectivity.

Comprehensive and Detailed In-Depth Explanation:

Internal Router (IR) : A router that exists entirely within a single OSPF area (e.g., Area 0). It does not have to be a Border Router (BR) .

Area Border Router (ABR) : A router that connects two or more OSPF areas . It maintains separate LSDBs for each area and forwards summary LSAs between them.

Autonomous System Boundary Router (ASBR) : A router that connects the OSPF domain to an external network (e.g., BGP, another OSPF AS).

The statement is false because:

An IR in Area 0 does not have to be a BR (Border Router). It can just be a normal internal router.

An ASBR does not have to be an ABR . An ASBR can exist inside any OSPF area , even a single area, without needing to connect multiple areas.

???? Reference: Huawei HCIA-Datacom Study Guide, OSPF Router Types and Area Concepts.