1. Home
  2. Huawei
  3. HCIP-WLAN
  4. H12-322
  5. Huawei Certified ICT Professional - Wireless Local Area Network- Planning and Optimizing Enterprise WLAN Questions and Answers

Pass the Huawei HCIP-WLAN H12-322 Questions and answers with CertsForce

 Huawei Exams      Go to Exam Detail      Get Premium Access
Viewing page 8 out of 9 pages
Viewing questions 71-80 out of questions
Questions # 71:

When planning a WDS network, what kind of radio is generally preferred for wireless bridged links?

Options:
A.

2.4GHz

B.

5GHz

C.

2.4GHz and 5GHz are recommended

D.

Both 2.4GHz and 5GHz are not recommended, and bridges require special frequency bands.

Expert Solution
Questions # 72:

For WLAN outdoor coverage planning, what is the recommended coverage radius when using an external 2.4G 3dBi omnidirectional antenna?

Options:
A.

30~50 meters

B.

80~100 meters

C.

150~200 meters

D.

200~250 meters

Expert Solution
Questions # 73:

In a certain scenario, AP9330DN is used to cover 4 student dormitories, and each dormitory has 10 mobile phone access (single spatial stream terminal, supporting 2.4G/5G).

Calculated by the concurrency rate of 60%, the maximum average uplink/downstream bandwidth value for each user is supported?

Options:
A.

2Mbps, 4Mbps

B.

1Mbps, 2Mbps

C.

4Mbps, 4Mbps

D.

512Kbps, 512Kbps

Expert Solution
Questions # 74:

Which of the following options are inherent properties of the antenna?

Options:
A.

Horizontal lobes, vertical lobes

B.

Downtilt angle

C.

Azimuth

D.

Gain

Expert Solution
Questions # 75:

When using two ACs for VRRP networking, in order to assign the correct address and gateway to the AP, which of the following address allocation schemes cannot be used?

Options:
A.

Statically specified address scheme

B.

DHCP interface pool solution

C.

DHCP global pool solution

D.

DHCP relay solution

Expert Solution
Questions # 76:

The following is the correct description of the AC deployment method?

Options:
A.

AC deployment can be divided into two types: side-by-side deployment and direct-attached deployment.

B.

The side-by-side networking is a superposition of the existing network. It has fewer modifications to the existing network and is quick and convenient to deploy. In addition, according to the control requirements for wireless users,

Choose direct forwarding or tunnel forwarding mode according to your needs

C.

In the direct connection network deployment mode, because the AC is connected in series in the network, the management data and user data between the AP and the AC must pass.

CAPWAP tunnel forwards

D.

Direct connection networking is mainly used in large campus network scenarios. The AP size in the network is recommended to be 1000 or more.

Expert Solution
Questions # 77:

In a WDS scenario, how many Leaf APs can a Fire AP associate with without considering bandwidth?

Options:
A.

3

B.

6

C.

15

D.

32

Expert Solution
Questions # 78:

In the 5W of the refined policy control in the Huawei WLAN network solution, What is the control method?

Options:
A.

User role based access control

B.

Time-based access control

C.

Location-based access control

D.

Policy control based on terminal type

Expert Solution
Questions # 79:

The outdoor bridge backhaul needs to focus on confirming the installation of the AP at the node and paying attention to the transmission path between the nodes.

What is the correct statement about leaf nodes, aggregation nodes, and transmission paths?

Options:
A.

If the leaf node needs to be used for coverage, it is necessary to pay attention to the outdoor coverage of the survey.

B.

If there are multiple aggregation points, you need to confirm the location of each aggregation point. Each aggregation point also needs to confirm the AP installation location and power supply mode.

C.

There should be no obstructions or distances between the convergence points and leaf nodes. There are allowed between the relay nodes and the convergence points, relay nodes and leaf points.

Obstacle obstruction

D.

The transmission path is the path between the stations. In the site survey, it is necessary to confirm the distance between the connected nodes. The PMP mode needs to confirm the most between the links.

large angle

Expert Solution
Questions # 80:

Seeking to use the open standard IGP protocol and supporting the partitioning function. Which of the following protocols is most preferred?

Options:
A.

RIP

B.

OSPF

C.

EIGRP

D.

BGP

Expert Solution
Viewing page 8 out of 9 pages
Viewing questions 71-80 out of questions