Huawei H12-322 Exam Questions Free Practice Test

Viewing page 4 out of 9 pages

Viewing questions 31-40 out of questions

Questions # 31:

In the 3-hop co-frequency chain Mesh, assuming that the throughput of the MPP is 60 Mbps and the throughput under each MP is the same, the throughput of each MP is

How many?

Options:

5Mbps

10Mbps

15Mbps

20Mbps

Expert Solution

Questions # 32:

What is the coverage field strength requirement for the WLAN focus area?

Options:

-40~-65dBm

-40~-80dBm

-60~-100dBm

-80~-100dBm

Expert Solution

Questions # 33:

When using a fat AP and a terminal to test the attenuation of an obstacle, it is best to bring the signal source close to the wireless terminal and the obstacle so that the test data is accurate.

Options:

True

False

Expert Solution

Questions # 34:

Usually, what is the attenuation of 2.4GHz at 10 meters?

Options:

32dB

53dBm

71dBm

92dB

Expert Solution

Questions # 35:

The AC is configured as follows. How long does it take to open RTS/CTS when the length of the packet exchanged between the terminal and the AP?

[AC6605-wlan-view] radio-2g-profile name default

[AC6605-wlan-radio-2g-prof-default] rts-cts-mode rts-cts

[AC6605-wlan-radio-2g-prof-default] rts-cts threshold 1500

Options:

<1500 Byte

1500 Byte

>1500 Byte

1024 Byte

Expert Solution

Questions # 36:

Which of the following outdoor APs supports dual 5G deployment scenarios?

Options:

AP6510DN

AP8030DN

AP8130DN

AP9430DN

Expert Solution

Questions # 37:

From the general business application of the high-density stadium, which of the following requires the lowest bandwidth?

Options:

Video

Web

VoIP

Expert Solution

Questions # 38:

The following statement about the connection of the device is wrong?

Options:

The joints on the AP/power splitter/coupler/combiner/antenna are generally N-type male heads, and the two ends of the feeder are generally N-type female heads, and the two are connected to each other.

Under normal circumstances, the indoor system or the longer distance (greater than 50 meters) uses 7/8 lines, and the tributary or short-distance transmission uses 1/2 feeders.

1/2 super soft feeder is very thin and flexible. It is generally used in the case where the gap is small or the turning angle is large.

When the actual project calculates the feeder, the short feeder can directly calculate the number of standard feeders. After the long feeder needs to confirm the routing path, reserve 10%.

~20% feeder length

Expert Solution

Questions # 39:

Which of the following functions can the WLAN Planner accomplish?

Options:

Automatically deploy AP

View field strength simulation diagram

Outdoor bridge planning

On-site signal scanning

Expert Solution

Questions # 40:

Which of the following is true about the WLAN Survey Pad tooling method?

Options:

Supporting finger operations during the process of drawing obstacles, moving the scaled drawings to find the best position to draw obstacles, does not support increasing obstacle types

The industrial survey tools and planning tools need to be used together. First, get the drawings, first use the planning tools to make a simple plan for the project, and then take the Pad to the present.

Work on the site, then export the project and import it into the planning tool for further planning.

Create a new project, select the floor node, see the corresponding building thumbnail in the preview box on the right, click on the thumbnail to enter the selected floor to supplement the survey information.

Pad's industrial survey tools and planning tools are suitable for pre-sales network regulations, and WLAN test tools are used for post-production verification before delivery.

Expert Solution

Viewing page 4 out of 9 pages

Viewing questions 31-40 out of questions

Pass the Huawei HCIP-WLAN H12-322 Questions and answers with CertsForce