Pass the CWNP CWT - Certified Wireless Technician CWT-100 Questions and answers with CertsForce

Viewing page 1 out of 2 pages
Viewing questions 1-10 out of questions
Questions # 1:

You have recently changed the passphrase used with WPA2 in several APs and have reconfigured clients for

the new passphrase. Now, a few clients are unable to connect to those APs. Most clients can connect to them

just fine. What is the likely problem?

Options:

A.

The APs have the wrong new passphrase


B.

The working clients have the wrong passphrase


C.

The problem clients are not 802.11-capable


D.

The problem clients have the wrong passphrase


Expert Solution
Questions # 2:

What is used as a mid-span Power over Ethernet (PoE) power source equipment (PSE) device?

Select one:

Options:

A.

Switch


B.

Router


C.

Controller


D.

PoE injector


Expert Solution
Questions # 3:

What is a common problem in specialty Wi-Fi devices?

Options:

A.

The use of 802.11 VHT-only chipsets


B.

The use of older, less capable 802.11 chipsets


C.

The use of 802.11 DSSS-only chipsets


D.

The use of newer, more capable 802.11 chipsets


Expert Solution
Questions # 4:

What does output power control allow you to do in the configuration of an AP?

Options:

A.

Increase or reduce the output power


B.

Change the channel


C.

Implement Dynamic Frequency Selection (DFS)


D.

Increase or reduce the antenna gain


Expert Solution
Questions # 5:

When configuring a standalone AP with a web-based interface, what should be changed to protect the HTTP

interface used to manage the AP?

Options:

A.

Admin account password


B.

WPA2 passphrase


C.

SSID


D.

WPA passphrase


Expert Solution
Questions # 6:

You have configured a WLAN profile on a client computer for a hidden SSID network. The SSID operates in

both 2.4 GHz and 5 GHz. The profile never connects or even attempts to connect. What is the most likely

configuration error in the profile or on the computer?

Options:

A.

Wrong passphrase


B.

Band selection is configured for 5 GHz-only


C.

Wrong SSID


D.

Band selection is configured for 2.4 GHz-only


Expert Solution
Questions # 7:

What device type is configured to respond when a probe request is received in a BSS?

Options:

A.

Desktop


B.

Switch


C.

Laptop


D.

AP


Expert Solution
Questions # 8:

How many non-overlapping channels are available in regulatory domains in the 2.4 GHz frequency band?

Select one:

Options:

A.

14


B.

1


C.

3


D.

11


Expert Solution
Questions # 9:

When clients are using unacceptably low data rates for WLAN transmissions, what metric is too low?

Options:

A.

SNR


B.

Interference strength


C.

Noise floor strength


D.

MTU size


Expert Solution
Questions # 10:

You are receiving reports from several users that their clients connect with very low data rates. All reports are

confined to a particular area in the facility and the users report that the problem does not occur with the same

devices in other areas. What is most likely problem in that area?

Options:

A.

High SNR


B.

Improper AP security configuration


C.

Poor signal strength


D.

Improper client security configuration


Expert Solution
Viewing page 1 out of 2 pages
Viewing questions 1-10 out of questions