Pass the CompTIA A+ 220-1201 Questions and answers with CertsForce

Answer of both steps below.

A group of wires with different colors AI-generated content may be incorrect.

A screenshot of a computer AI-generated content may be incorrect.

Packet loss

Plug an Ethernet cable into the workstation

A screenshot of a computer AI-generated content may be incorrect.

When a printout is being cut off, CompTIA A+ Core 1 (220-1201) troubleshooting emphasizes checking the simplest, most likely configuration mismatch first—the printer’s paper size/source settings. Even if the user physically loaded the correct paper, the print job can still be formatted incorrectly if the printer driver, application, or printer itself is set to use a different paper size or a different tray. If the printer thinks it is using a smaller paper size (or a tray configured for smaller paper), it may clip the printable area and truncate the image at the edges.

Changing tray settings (paper size and paper source) aligns the printer’s configuration with the actual media installed, which is a standard first-step for issues related to formatting, clipping, and page boundaries. Image quality (DPI) affects sharpness, not cropping. File type rarely causes consistent edge cutoff compared with page setup mismatches. Adjusting image size could work as a workaround, but CompTIA best practice is to correct the paper/tray and page setup settings first so all prints format properly without editing the document each time.

The correct answer is C. Virtualization .

According to CompTIA A+ Core 1 220-1201 objectives under Networking and Cloud/Virtualization Concepts:

Virtualization allows a single physical server to host multiple virtual machines (VMs), each running its own operating system and applications.

This reduces hardware costs because fewer physical servers are required to run multiple workloads, and it improves resource utilization, scalability, and management.

Why the other options are incorrect:

A. Containerization: Optimizes application deployment by packaging applications and dependencies, but containers share the host OS kernel and are not full OS instances.

B. Cloud computing: Refers to delivering computing services over the internet; it can use virtualization but is broader and not specifically focused on reducing physical hardware.

D. Remote desktop services: Provides remote access to desktops or applications; it does not reduce hardware requirements for hosting multiple OS environments.

The degraded status on Server 2 indicates a RAID-5 issue, typically due to a failed or failing drive. In RAID-5 configurations, when one drive fails, the system can still operate but with reduced performance as parity data is used to rebuild missing data on-the-fly.

Recommended Replacement Drive:

To minimize performance degradation, the replacement drive should be:

SAS HDD with the same specifications (64KB stripe size, no read-ahead, and write-back policy).

Matching the configuration exactly ensures seamless integration and optimizes recovery speed in the RAID-5 array.

In RAID-5, degraded performance is expected when one drive fails, as parity data needs to rebuild missing information during each read/write process. Replacing the failed drive restores the RAID array to optimal status, reducing the load on existing drives and returning the system to normal read/write performance. The write-back policy and disabled disk cache settings are designed to reduce latency and increase efficiency, essential for handling real-time applications.

A user reports poor performance on the

application server.

INSTRUCTIONS

Click on Server 1 and Server 2 and review

the information presented in each chart to

determine which drives need to be replaced.

Select the appropriate replacement drive

that should be used, for the least

performance degradation to the server.

A computer server with many black and silver parts AI-generated content may be incorrect.A computer server with many black boxes Description automatically generated with medium confidence

A screen shot of a computer AI-generated content may be incorrect.A screen shot of a computer Description automatically generated

A computer screen shot of a computer AI-generated content may be incorrect.A computer screen shot of a computer Description automatically generated

A computer screen shot of a computer AI-generated content may be incorrect.A computer screen shot of a computer Description automatically generated

A computer screen shot of a computer AI-generated content may be incorrect.A computer screen shot of a computer Description automatically generated

A screenshot of a computer AI-generated content may be incorrect.A screenshot of a computer Description automatically generated

A screenshot of a computer AI-generated content may be incorrect.A screenshot of a computer Description automatically generated

The correct answer is D. Dual channel .

In the CompTIA A+ Core 1 (220-1201) hardware objectives, memory bandwidth refers to the amount of data that can be transferred between RAM and the CPU in a given amount of time.

Dual channel memory architecture increases bandwidth by:

Allowing the memory controller to access two memory modules simultaneously

Effectively doubling the data transfer rate compared to single-channel configurations

Improving overall system performance, especially in memory-intensive tasks

Why the other options are incorrect:

A. CAS latency

CAS latency measures the delay before data is available after a request. Lower latency improves response time, but it does not significantly increase total bandwidth.

B. ECC

ECC (Error-Correcting Code) improves reliability by detecting and correcting errors, but it does not increase data transfer bandwidth.

C. High clock speed

Higher clock speed does increase bandwidth, but not as significantly as enabling dual channel , which allows parallel data transfer paths and provides a greater overall increase.

Final Answer: D. Dual channel

Comprehensive and Detailed Explanation From Exact Extract:

RAID 6 uses two parity blocks, allowing it to tolerate the failure of two drives without losing data.

A sandbox is a secure, isolated environment used to test potentially harmful software or code. It prevents the software from affecting the main system, allowing safe malware testing. Thismethod is standard in cybersecurity best practices.

The described behavior indicates that the customer is likely exceeding their mobile data allowance each month. Multiple cloud backup services continuously synchronizing gigabytes of data consume large amounts of cellular bandwidth, which can trigger data throttling by the mobile carrier near the end of the billing cycle. This results in noticeably slower browsing speeds.

Since data availability is important, disabling backup services entirely is not the best option. Installing an SD card increases local storage but does not reduce cellular data usage. Expanding cache storage does not address network bandwidth consumption or carrier throttling.

Configuring data synchronization to occur only over Wi-Fi ensures that backups continue uninterrupted when the device is connected to a wireless network, while preventing excessive cellular data usage. This preserves data availability and eliminates unnecessary mobile data consumption, restoring consistent browsing performance throughout the month.

CompTIA Core 1 (220-1201) mobile device troubleshooting objectives emphasize managing background services, synchronization settings, and data usage to resolve performance and connectivity issues on smartphones.

Shielded Twisted Pair (STP) cabling is specifically designed to protect data transmissions from electromagnetic interference (EMI) and radio frequency interference (RFI). According to CompTIA Core 1 (220-1201) networking cabling objectives, STP cables include an additional shielding layer—either around individual wire pairs or the entire cable—that reduces the impact of external electrical noise.

In environments where network cables are installed near heavy machinery, fluorescent lighting, power cables, or radio transmitters, EMI can cause data corruption, retransmissions, and reduced network performance. STP helps maintain signal integrity in these high-interference environments.

Unshielded Twisted Pair (UTP) relies only on wire twisting to reduce interference and is more susceptible to EMI compared to STP. Thunderbolt and USB are peripheral interface standards, not structured network cabling solutions, and they are not intended for long-distance network installations.

CompTIA emphasizes selecting the appropriate cabling type based on environmental factors, particularly when interference is a concern. For locations with potential EMI, STP is the recommended choice.