Pass the CompTIA A+ 220-1101 Questions and answers with CertsForce

Quad-channel memory architecture allows the CPU to access four memory modules simultaneously, increasing the memory bandwidth and performance. DDR4 RAM is a type of memory that has higher speed and lower power consumption than DDR3. SODIMM is a smaller form factor of memory that is typically used in laptops, not desktops. ECC RAM is a type of memory that can detect and correct errors, but it is more expensive and slower than non-ECC RAM. Triple-channel memory architecture is less common and less efficient than quad-channel. References: https://www.comptia.org/certifications/a#examdetails https://www.comptia.org/blog/what-is-ddr4-ram https://www.comptia.org/blog/what-is-quad-channel-memory

Cleaning the air filter is the best action to resolve the issue of a projector that shuts down after fifteen minutes of use. A dirty air filter can cause overheating and trigger the projector’s thermal protection mechanism. Replacing the video input cable, changing the bulb, or swapping the power cord are unlikely to solve the overheating issue

A damaged battery can cause a laptop to overheat and swell, making it unable to sit level on the workspace. A swollen battery can also pose a fire hazard and damage other components of the laptop, such as the motherboard or keyboard. The technician should replace the battery as soon as possible and dispose of it properly according to local regulations. Reference: https://partners.comptia.org/docs/default-source/resources/a-core-series-combined-content-guide (page 25)

RAID 0 is a configuration that stripes data across multiple disks without parity or redundancy. It provides the fastest speed and maximum storage capacity among the RAID types listed, but it also has no fault tolerance. RAID 1 mirrors data across two disks, providing redundancy but halving the storage capacity. RAID 5 stripes data across three or more disks with parity, providing fault tolerance but reducing the storage capacity by one disk. RAID 10 combines mirroring and striping across four or more disks, providing both speed and redundancy but reducing the storage capacity by half.

802.1X is a network authentication protocol commonly used in enterprise environments. If the user cannot connect to the office wireless network but can connect at home, the issue is likely related to the 802.1X certificate required for authentication. Installing or updating the certificate will resolve the issue.

Why Not B (Check the wireless router settings): If other users can connect to the network, this step is unnecessary.

Why Not C (Update the wireless driver): Driver updates might resolve connectivity issues but are unrelated to 802.1X certificate authentication.

Why Not D (Disable the Windows firewall): The firewall does not affect 802.1X authentication.

CompTIA A+ Exam Reference: Core 1 (220-1101), Section 2.6, wireless network authentication​.

A firewall implements ACLs (Access Control Lists) to filter traffic and enforce policies based on rules such as IP address, port, or protocol.

Why Not A (Managed switch): A managed switch supports VLANs and QoS but does not enforce ACLs at the network perimeter.

Why Not B (Gateway): Gateways connect networks and translate protocols but don’t typically implement ACLs.

Why Not C (Repeater): Repeaters extend signal range but don’t enforce policies.

CompTIA A+ Exam Reference: Core 1 (220-1101), Section 2.2, firewall concepts​.

A VLAN (Virtual Local Area Network) segments a physical network into separate logical networks, enhancing security by isolating traffic.

Why Not A (Minimizes collision domains): VLANs manage broadcast domains, not collision domains.

Why Not B (Provides private access to cloud resources): VLANs operate within a local network, not cloud-specific.

Why Not C (Increases network address space): VLANs do not affect address space.

CompTIA A+ Exam Reference: Core 1 (220-1101), Section 2.6, VLAN concepts​.

Comprehensive and Detailed In-Depth Explanation:

Ultra HD (UHD), also referred to as 4K UHD, has a resolution of 3840x2160. It's four times the resolution of standard 1080p (Full HD), offering more screen real estate and sharper images.

Option A (1920x1080): Full HD (FHD), not UHD.

Option B (2048x1080): DCI 2K — used in cinema, not common for Ultra HD.

Option D (7680x4320): Known as 8K UHD, not standard Ultra HD.

CompTIA A+ Core 1 Exam Objective Reference:

Objective 1.7: Compare and contrast display technologies and their features.

===========

An IDE hard drive uses a Molex connector for power. This 4-pin connector is a standard for older drives.

Why Not A (F type): F type connectors are used for coaxial cables in video and internet applications.

Why Not B (SC): SC connectors are for fiber optic cables.

Why Not D (Lightning): Lightning connectors are for Apple devices.

CompTIA A+ Exam Reference: Core 1 (220-1101), Section 3.1, cable types and connectors​.

In this scenario, running a network cable over a long distance (279ft or 85m) and sharing conduit with a large power cable requires careful consideration of electromagnetic interference (EMI) and the physical distance limitations of the cable type. Fiber optic cables are immune to electromagnetic interference and can support much longer distances than copper-based cables like Cat 5e or Cat 6 without signal degradation. This makes fiber optic the most appropriate choice for this project.

Comprehensive and Detailed Step-by-Step Explanation:

S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology):

S.M.A.R.T. is a monitoring system integrated into modern HDDs and SSDs that detects and reports on various indicators of drive health and reliability.

A S.M.A.R.T. error indicates that the drive is showing signs of impending failure, even if the PC continues to boot and work normally for the time being.

Next Steps:

The appropriate action is to replace the hard drive (HDD) because a S.M.A.R.T. error is an early warning of possible hardware failure. Ignoring the warning could result in data loss if the drive fails completely.

The technician should also back up the user's data immediately to avoid losing critical information.

Incorrect Options:

B. Update the PC's BIOS: While keeping the BIOS updated is a good practice, it does not address the S.M.A.R.T. error, which is specific to the HDD.

C. Close the ticket: Closing the ticket without resolving the issue would be improper, as the S.M.A.R.T. error is a hardware problem that needs to be addressed to prevent future data loss or downtime.

D. Change the NIC: The NIC (Network Interface Card) is unrelated to the storage system and would not resolve a S.M.A.R.T. error.

Key Takeaway:

A S.M.A.R.T. error is a critical indicator of HDD health issues, and the drive should be replaced as soon as possible. Backing up data is also essential.

Step by Step Detailed Comprehensive Explanation with All CompTIA References:

Analysis of the Problem:

Degraded RAID performance and red light indicate a failed HDD in the array.

Option Evaluation:

A. HDD: Replacing the failed hard drive restores RAID performance. Correct.

B. CPU: Not related to RAID performance. Incorrect.

C. PSU: Power issues wouldn’t cause RAID degradation. Incorrect.

D. RAM: Unrelated to RAID functionality. Incorrect.

The ATX 3.0 16-pin connector provides power to high-end graphics cards, and a poor connection could lead to power issues and burning smells.

Older motherboards use 20-pin connectors, while newer power supplies use 24-pin connectors. An adapter resolves the compatibility issue cost-effectively.

Why Not A (Adjust the input voltage): Input voltage adjustment is unrelated to connector compatibility.

Why Not B (Install a modular power supply): While modular supplies are versatile, this doesn’t address the connector issue directly.

Why Not C (Rebuild the failed power supply): Rebuilding is costly and complex compared to using an adapter.

CompTIA A+ Exam Reference: Core 1 (220-1101), Section 3.4, power supply compatibility​.

A significant increase in the number of reallocated sectors on a hard drive is a clear indication that the drive is experiencing physical damage or wear and tear that cannot be repaired through software means. Reallocated sectors are bad sectors that the drive's firmware has marked as unusable and moved data to spare sectors. This is often a precursor to drive failure. Therefore, the most prudent next step is to replace the hard drive to ensure data integrity and system reliability.

Port 20 is used for FTP data transfer (along with port 21 for control), so enabling this port is required. Ports 23, 53, and 68 are unrelated to FTP functionality, as they correspond to Telnet, DNS, and DHCP respectively. CompTIA A+ Core 1 objectives outline the importance of knowing standard port numbers for network services.

If users are only able to save a small number of pictures on the microSD cards before running out of space, it suggests a formatting issue. Improper or incomplete formatting can lead to the card not utilizing its full storage capacity, resulting in significantly less available space for storing pictures. Formatting the microSD cards correctly would ensure the file system on the cards is set up properly, allowing the devices to use the full capacity of the cards for storage. Compatibility, UHD storage capability, and camera storage settings are less likely to be the issue in this scenario.

Configuring the monitor as an "extended" display will allow the laptop and monitor to show different content. By default, laptops mirror displays, so this setting change enables dual display functionality. This is covered under CompTIA Core 1 exam objectives for managing display configurations and settings​.

The "Ease of Access" settings in Windows are designed to help make the computer more accessible to users with various needs. Among these settings, there are options to adjust mouse and cursor functionality, including the visibility and behavior of the cursor. Adjusting these settings can resolve issues related to cursor trails, making it a suitable first step in troubleshooting this specific problem.