Pass the Cisco CCNP Enterprise 300-430 Questions and answers with CertsForce

Cisco Hyperlocation is enabled in the RF Profile on a Cisco Catalyst 9800 Series Wireless Controller web interface. The RF Profile contains settings that pertain to radio frequency management, which includes the configuration for Hyperlocation.

The correct command to add a VLAN with a specific ID to a FlexConnect group in a Cisco Wireless LAN Controller (WLC) is ‘config flexconnect group BranchA-FCG vlan 30 add’. This command specifies the FlexConnect group name ‘BranchA-FCG’ and the VLAN ID ‘30’, followed by the action ‘add’, which is consistent with Cisco’s CLI syntax for WLC configuration. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

To separate different types of client authentication on a Cisco ISE deployment, policy sets and policy groups can be used. Policy sets allow the creation of policies based on conditions such as device type, while policy groups categorize clients for the application of specific policies. References: Cisco ISE documentation on policy sets and policy groups will have detailed information.

 To connect a Workgroup Bridge (WGB) to a wireless network and authenticate its certificate against a RADIUS server like ISE, the following steps are necessary:

A. Configure the certificate, WLAN, and radio interface on WGB: This is essential because the WGB needs to have the correct certificate to present to the RADIUS server for authentication. Additionally, the WLAN and radio interface must be configured to ensure proper communication with the wireless network.

E. Configure WGB as a network device in ISE: By configuring the WGB as a network device within ISE, it becomes a recognized entity that can be authenticated and authorized accordingly.

F. Configure a policy on ISE to allow devices to connect that validate the certificate: This step ensures that only devices with a validated certificate, such as the WGB, can connect to the network, enhancing security.

To create an account for CLI access to an access point for troubleshooting, the WLC must be configured to allow user access with the capability to make changes. The ReadWrite User Access Mode enables an engineer to have full read and write access to the AP’s configuration via the CLI, which is necessary for performing troubleshooting tasks. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide.

When a wireless controller is configured to authenticate clients against Microsoft Active Directory using PEAP (Protected Extensible Authentication Protocol), it uses RADIUS (Remote Authentication Dial-In User Service) as the protocol to communicate with the authentication server. RADIUS is a networking protocol that provides centralized Authentication, Authorization, and Accounting (AAA) management for users who connect and use a network service.

In this scenario where branch wireless users can still associate locally but cannot access head office services due to WAN downtime indicates that Cisco FlexConnect is likely in use. The correct elements are: A - authentication-local/switch-local: This means that client authentication and data switching are happening locally at the branch. E - standalone mode: With WAN down, FlexConnect APs operate in standalone mode allowing clients to associate even without connectivity back to WLC. F - WEB authentication: This could be used as an authentication method regardless of WAN state since it’s processed locally at AP level. References := (CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 The Cisco Mobility Services Engine (MSE) integrates with Cisco DNA Center to provide advanced location services, including the tracking of clients experiencing connectivity issues. This integration allows network administrators to visualize and troubleshoot client locations effectively. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, which details the integration of location services within Cisco DNA Center.

When configuring an Access Control List (ACL) to restrict traffic to the Wireless LAN Controller (WLC) CPU, the direction of the traffic is crucial. Since the ACL is meant to control traffic that is destined for the WLC CPU, it should be set as “Inbound”. This means that any rules applied within this ACL will affect incoming traffic towards the WLC, which is necessary when aiming to restrict certain types of traffic from reaching and potentially overwhelming the controller’s processing capabilities. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

 Cisco Context Aware Services provide real-time tracking of mobile assets and users by gathering contextual information from networked devices. This service is not limited to wireless devices; it can track both wired and wireless devices within the network. The technology utilizes elements like Received Signal Strength Indicator (RSSI) and Time Difference of Arrival (TDoA) for location tracking and telemetry. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, and Cisco Context Aware Software FAQ.