An engineer must connect a fork lift via a WGB to a wireless network and must authenticate the WGB certificate against the RADIUS server. Which three steps are required for this configuration? (Choose three.)
A.
Configure the certificate, WLAN, and radio interface on WGB.
B.
Configure the certificate on the WLC.
C.
Configure WLAN to authenticate using ISE.
D.
Configure the access point with the root certificate from ISE.
E.
Configure WGB as a network device in ISE.
F.
Configure a policy on ISE to allow devices to connect that validate the certificate.
To connect a Workgroup Bridge (WGB) to a wireless network and authenticate its certificate against a RADIUS server like ISE, the following steps are necessary:
A. Configure the certificate, WLAN, and radio interface on WGB: This is essential because the WGB needs to have the correct certificate to present to the RADIUS server for authentication. Additionally, the WLAN and radio interface must be configured to ensure proper communication with the wireless network.
E. Configure WGB as a network device in ISE: By configuring the WGB as a network device within ISE, it becomes a recognized entity that can be authenticated and authorized accordingly.
F. Configure a policy on ISE to allow devices to connect that validate the certificate: This step ensures that only devices with a validated certificate, such as the WGB, can connect to the network, enhancing security.
Contribute your Thoughts:
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit