Pass the NAHQ CPHQ Certification CPHQ Questions and answers with CertsForce

Detailed Explanation:

FMEA is a proactive tool thatidentifies and prioritizes potential risks in a process and develops action plans to mitigate them.

Option C: Risks were identified and prioritized, and action plans were developed

This option accurately reflects the FMEA process, which involves assessing potential failure modes, their effects, and prioritizing risks for corrective actions.

Option A: Key factors were identified, and corrective action plans were created

This description is somewhat accurate but lacks emphasis on risk prioritization, which is central to FMEA.

Option B: Actions were taken to address baseline performance and monitored for sustainment

This describes a performance improvement process rather than FMEA’s risk prioritization focus.

Option D: Special causes were identified, and variation was reduced

This describes root cause analysis and statistical process control, not FMEA.

Human factors design is the discipline concerned with the understanding and improvement of the interactions among humans and other elements of a system, such as technology, processes, workflows, teams, and environments12.

Human factors design aims to optimize human well-being and overall system performance, which includes patient safety12.

One of the domains of human factors design is physical ergonomics, which deals with the design of workplaces, equipment, and tasks to fit the physical capabilities and limitations of humans23.

A common problem in healthcare settings is the risk of occupational injuries and patient harm due to unsafe patient handling, such as lifting, transferring, or repositioning patients34.

A human factors design solution for this problem would be to provide new lift equipment that is accessible at the point of care, so that nursing staff can use it whenever they need to handle patients safely and comfortably34.

This solution would reduce the physical strain and fatigue on the nursing staff, as well as the potential for patient falls, pressure ulcers, or other adverse events34.

This solution would also improve the efficiency and quality of care, as nursing staff would spend less time and effort on patient handling and more time on other aspects of care34.

Therefore, option B is the best example of a human factors design solution for this scenario, as it addresses the physical ergonomics of the system and improves both human well-being and system performance.

Option A, development of an organizational minimal lift policy, is not a human factors design solution, but a policy intervention that may or may not be effective depending on the availability and usability of the lift equipment3.

Option C, a daily email with safe patient handling reminders, is not a human factors design solution, but a communication intervention that may or may not be followed by the nursing staff depending on their workload and motivation3.

Option D, an education module on safe patient handling, is not a human factors design solution, but a training intervention that may or may not be sufficient to change the behavior and skills of the nursing staff depending on the quality and frequency of the training3. References: 1: Human factors and ergonomics as a patient safety practice 2: Module 2: Human Factors Design: Applications for Healthcare 3: Human factors engineering can improve patient safety 4: Human factors engineering in patient safety

Hospital-acquired conditions (HACs) are tracked for quality reporting (e.g., CMS HAC Reduction Program), requiring accurate documentation of whether conditions were present on admission (POA).

Option A (Computer assisted coding for ICD-10): Coding tools improve coding efficiency but do not specifically ensure POA accuracy for HACs.

Option B (Computerized physician order entry for laboratory tests): CPOE improves order accuracy but is unrelated to HAC documentation.

Option C (Electronic health record alerts for present on admission indicators): This is the correct answer. The NAHQ CPHQ study guide states, “EHR alerts for POA indicators ensure accurate documentation of whether conditions were present on admission, critical for identifying HAC rates” (Domain 1). Alerts prompt clinicians to document POA status, reducing errors.

Option D (Electronically delivered medical record queries for physicians): Queries clarify documentation but are reactive, less effective than proactive alerts.

CPHQ Objective Reference: Domain 1: Patient Safety, Objective 1.7, “Use technology to enhance safety reporting,” includes EHR alerts for accurate HAC tracking. The NAHQ study guide notes, “POA alerts improve HAC identification accuracy” (Domain 1).

Rationale: EHR alerts ensure real-time POA documentation, directly improving HAC rate accuracy, as per CPHQ’s safety technology principles.

 Performance Improvement Plans (PIPs) are most successful when they are first linked with strategic goals12. This is because strategic goals provide a clear direction for the organization and its employees1. When a PIP is linked to these goals, it ensures that the performance improvements being targeted are aligned with the overall objectives of the organization12. This alignment helps to ensure that the efforts put into performance improvement are contributing to the success of the organization as a whole12.

Secondary prevention in healthcare is primarily intended to focus on the early detection and treatment of disease12. This level of prevention is about detecting and treating disease early, often before symptoms are present, thus minimizing serious consequences2. It includes measures taken during an interaction between an individual patient and a clinician1. Examples of secondary prevention include screening programs, such as mammography to detect breast cancerand dual x-ray absorptiometry (DXA) to detect osteoporosis2. Therefore, the answer is option C: focus on early detection and treatment of disease.

Patient safety goals, such as those established by The Joint Commission (e.g., National Patient Safety Goals), are designed to address specific, high-priority safety issues in healthcare settings to drive targeted improvements.

Option A (Evaluate safety-related near misses): While near-miss reporting is part of patient safety, patient safety goals focus on proactive interventions to prevent errors, not evaluating near misses after they occur.

Option B (Assist surveyors during the accreditation process): Patient safety goals are not primarily for surveyors but for guiding organizations to improve safety practices. They may be reviewed during accreditation, but this is a secondary function.

Option C (Aggregate safety data to improve performance): Aggregating safety data supports quality improvement, but patient safety goals are specific, actionable objectives (e.g., correct patient identification) rather than a data aggregation process.

Option D (Promote specific improvements in safety): This is the correct answer. NAHQ CPHQ study materials and The Joint Commission define patient safety goals as targeted initiatives to address critical safety issues, such as reducing medication errors or preventing surgical mistakes, by promoting evidence-based practices.

A team charter is a document thatoutlines the purpose, scope, and objectives of the team, including roles, responsibilities, and decision-making authority. Developing a team charter helps prevent complaints about lack of decision-making authority by:

Clarifying Roles and Responsibilities:

The team charter explicitly defines each member’s role, their level of decision-making authority, and the boundaries within which they operate. This helps to set clear expectations from the outset.

Establishing Clear Guidelines:

The charter provides a framework for how decisions are made, who needs to be consulted, and the process for escalating issues. This minimizes confusion and ensures that all team members are aware of their responsibilities and limitations.

Preventing Miscommunication:

By outlining the decision-making process and authority levels in the charter, it reduces the risk of miscommunication and misunderstanding about what the team can and cannot decide.

Building Consensus:

The development of the charter often involves the team itself, which can help build consensus and buy-in, ensuring that all members agree on the scope of their authority.

Other options like a project checklist, affinity diagram, or interrelationship diagram, while useful in different contexts, do not address the specific need for clarifying decision-making authority.

A quality improvement team is a group of people who work together to identify and solve problems in healthcare, improve service provision, and provide better outcomes for patients1.

One of the most widely used tools for the continuous improvement model is the plan-do-check-act (PDCA) cycle, which is a four-step quality assurance method2.

The PDCA cycle involves planning an improvement, testing it on a small scale, checking the results, and acting on the findings to either implement the change on a wider scale or start the cycle again with a different plan2.

The quality professional should stress the importance of making small changes in each cycle of change because this allows theteam to learn from each test, adapt to the local context, and avoid wasting resources on ineffective or harmful interventions3.

Making small changes also reduces the risk of resistance or backlash from stakeholders who may be affected by the change, as they can be involved in the testing and feedback process4.

Additionally, making small changes enables the team to measure the impact of each change and compare it with the baseline data, which helps to determine whether the improvement is achieving the desired outcomes5.

Therefore, the correct answer is A. making small changes in each cycle of change, as this is consistent with the principles and methods of quality improvement. References:

1: Quality improvement into practice | The BMJ

2: Continuous Improvement Model - Continual Improvement Tools | ASQ

3: PDSA Quality Improvement: A Scientific Method of Change

4: Different approaches to making and testing change in healthcare | The BMJ

5: Utilization of Improvement Methodologies by Healthcare Quality Professionals During the COVID-19 Pandemic | Journal for Healthcare Quality

 The annual evaluation of a quality improvement process should be based on organizational objectives. This is because the quality improvement process is designed to enhance the effectiveness and efficiency of an organization’s operations and align them with the organization’s strategic goals12. The AAAHC (Accreditation Association for Ambulatory Health Care) requires that documentation demonstrates at least an annual governing body review of the Quality Improvement (QI) program to evaluate effectiveness anddetermine if the purposes and objectives continue to be met3. Therefore, the annual evaluation of a quality improvement process must be based on organizational objectives to ensure that the process is effectively contributing to the achievement of these objectives.

Candidate B is the most effective choice to serve as a process champion. This candidate has a high level of interest, is respected as anopinion leader, and has some involvement with the current process. Although their authority to mobilize resources is low, their influence and interest in the project make them well-suited to champion the process. A process champion needs to have respect and credibility within the organization, which Candidate B has, along with sufficient involvement to understand the challenges and drive change.

Candidate A (A): While Candidate A has high involvement and interest, they lack authority and are not a respected opinion leader, which are critical qualities for a process champion.

Candidate C (C): Although Candidate C has high authority, their low involvement, interest, and moderate respectability make them less effective as a champion.

Candidate D (D): Candidate D has some involvement and respectability but lacks interest and authority, making them less suitable for the role.

References

NAHQ Body of Knowledge: Selecting Process Champions for Quality Improvement

NAHQ CPHQ Exam Preparation Materials: Characteristics of Effective Process Champions

=========

Implementing a new device, especially for high-risk procedures like chemotherapy, requires proactive risk assessment to prevent potential errors.

Option A (Cause and effect diagram): Also known as a fishbone diagram, this identifies causes of existing problems, not potential risks of a new device.

Option B (Failure mode and effects analysis (FMEA)): This is the correct answer. The NAHQ CPHQ study guide states, “FMEA is a proactive tool used to identify potential failure modes, their effects, and mitigation strategies before implementing new processes or devices” (Domain 1). For a chemotherapy device, FMEA assesses risks like dosing errors or device malfunctions.

Option C (Common cause analysis): This analyzes routine variations, not specific risks of new devices.

Option D (Root cause analysis (RCA)): RCA is reactive, used after an incident, not proactively before implementation.

CPHQ Objective Reference: Domain 1: Patient Safety, Objective 1.5, “Use proactive risk assessment tools,” emphasizes FMEA for new processes. The NAHQ study guide notes, “FMEA is critical for identifying risks in high-stakes interventions like chemotherapy” (Domain 1).

Rationale: FMEA proactively identifies and mitigates risks for a new chemotherapy device, aligning with CPHQ’s patient safety principles.

Explanation: The first step in creating an operational plan is to align priorities with the strategic plan (D), ensuring improvement efforts support long-term goals. Frameworks (A), qualitative data (B), and risk/cost criteria (C) follow alignment. NAHQ emphasizes strategic alignment as the foundation.

The question is asking which patient population is at the highest risk for falling.

By analyzing the provided table, it can be observed that patients who had “falls prior to admission” have the highest number of falls after admission (30 patients) compared to other categories.

This data indicates that having a history of falls before being admitted increases the risk of falling again.

Although I don’t have direct access to external websites including NAHQ, it’s generally understood in healthcare quality and safety that ahistory of falls is a significant risk factor for future falls. This is likely supported by resources and documents on patient safety and fall prevention available on professional healthcare quality websites.

 A flowchart is a type of diagram that represents a workflow or process, showing the steps as boxes of various kinds, and their order by connecting them with arrows. This diagrammatic representation illustrates a solution model to a given problem. Flowcharts are used in analyzing, designing, documenting, or managing a process or program in various fields12. In the context of a wrong site surgery, a flowchart can help visualize the entire process, identify potential points of failure, and understand how different steps in the process are interrelated. This makes it an effective tool for developing a shared understanding of the current process.

Detailed Explanation:

A prioritization matrix helps organize and prioritize tasks or actions by using criteria to rank them, aiding decision-making.

Option C: Prioritization matrix

This tool scores options based on criteria, making it effective for selecting or prioritizing actions systematically.

Option A:

Brainstorming generates ideas but does not help organize or prioritize them.

Option B:

Multi-voting narrows options by voting but lacks a structured approach based on criteria.