Pass the Huawei HCSP-Field H20-923_V1.0 Questions and answers with CertsForce

In Huawei smart module commissioning, the ECC800-Pro controller provides a dedicated management access path through its WAN ports. For on-site startup commissioning, technicians typically connect a laptop directly toWAN1and place the laptop IP address in the same subnet as the controller so they can open the WebUI and complete initial settings (time, network, device discovery, alarm checks, linkage tests, and parameter commissioning). Thefactory default IP address for WAN1 is 192.168.8.10, which is used as the initial access point before the address is planned and changed to match the customer’s management network. This default design supports quick “point-to-point” commissioning without depending on upstream switches, DHCP services, or enterprise IP planning at the very beginning of deployment. After login, Huawei commissioning practice is to harden access (password/authentication completion), then update network parameters and integrate the ECC800-Pro into the site monitoring network to enable continuous O&M, remote alarm reporting, and device management.

This statement is incorrect because it combines two different frame configurations into one description. In the UPS5000-H family,cabinet composition depends on capacity. For theUPS5000-H-1200 kVA, the user manual’s exterior description shows asingle power cabinet plus a bypass cabinet, together with theMDU. In other words, 1200 kVA is not described as “two power cabinets + one bypass cabinet” in its standard cabinet topology. By contrast, theUPS5000-H-1600 kVAis a wider frame and its maintenance/structure description explicitly showsPower cabinet 1, Power cabinet 2, and a bypass cabinet, and the product documentation also includes component sections for items like thesurge protection boxandMDU. Because the 1200 kVA model does not match the “two power cabinets” description, the combined statement (covering both 1200 kVA and 1600 kVA) isfalse, even though the “two power cabinets + one bypass cabinet” part is valid for 1600 kVA.

For the Huawei UPS5000-H, inverter startup is executed through theUPS’s own control interfaces, which provide the “Running Control / Inv. ON” operation with the required confirmations and permissions. TheUPS LCD (MDU touchscreen)supports inverter startup through menu operations such as selecting inverter start functions and confirming the action after authentication. TheUPS WebUIalso provides the same operational control path, where an operator logs in and issues theInv. ONcommand under the UPS monitoring/running control pages. These two interfaces are part of the UPS monitoring and control design and are explicitly used for commissioning and routine O&M actions.

By contrast,ECC(data center controller) andNetEco(management platform) are mainly used for site-level monitoring, alarm collection, visualization, reporting, and centralized management. While they can display UPS status and alarms (and may integrate with UPS data), inverter startup is defined as aUPS running control operationperformed on the UPS’s LCD or WebUI control plane to ensure proper authorization, safety checks, and command traceability.

This statement is true. In split DX/precision cooling refrigerant systems, the “gas pipe” typically refers to thesuction linereturning refrigerant vapor (and entrained compressor oil) from the indoor evaporator to the outdoor unit/compressor. When theoutdoor unit is higher than the indoor unit, the suction line includes avertical riser. Oil naturally tends to settle and flow downward under gravity, so without proper piping measures, oil may accumulate in low points or fail to be carried upward consistently, leading topoor oil return. Insufficient oil return can cause compressor lubrication issues, abnormal noise, overheating, reduced efficiency, and long-term reliability risks. Installingoil trapsat the bottom of the riser and thenevery 5–6 metersof vertical lift helps collect oil and allows it to be periodically swept upward by refrigerant velocity, maintaining stable oil circulation. This requirement is especially important in data center cooling because continuous operation and high availability demand reliable compressor lubrication and stable refrigerant flow under varying load conditions.

In Huawei room air conditioner and precision cooling unit O&M, fan replacement is treated as a maintenance activity that must be recorded in the controller so lifecycle management remains accurate. The controller tracksaccumulated runtimefor wear components such as indoor fans to support preventive maintenance planning, alarm thresholds, and performance analysis. After a fan is replaced, the old runtime value must be cleared so the system can correctly measure the new fan’s service hours, avoiding premature “maintenance due” prompts or misleading reliability assessments. This function belongs to themaintenancefunction set rather than alarm viewing, parameter settings, or basic running status. Therefore, the correct navigation is throughMenu > Maint > Performance Maintenance, where the technician can locate the indoor fan runtime item and reset/clear it after confirming the replacement. Performing this step ensures consistent O&M records, supports correct maintenance intervals, and helps troubleshooting by aligning future fan-related alarms with the actual operating hours of the newly installed component.

Huawei’s ECC800-Pro supports PUE (Power Usage Effectiveness) management as part of its energy efficiency and green data center features. In practical O&M, different sites calculate PUE differently depending on metering topology, what loads are included (IT load only vs. auxiliary loads), and whether the site uses integrated modules (UPS, cooling, lighting, etc.) or external systems. To handle these real-world differences, the ECC800-Pro provides two PUE configuration approaches on the WebUI.“Standard”mode is used when the site’s metering points and calculation logic align with a predefined Huawei template, enabling rapid commissioning and consistent reporting.“User-defined”mode is used when the customer’s metering structure or management requirements differ—allowing engineers to select specific measurement points, define inclusion/exclusion rules, and tailor the calculation path so that displayed PUE matches the site’s accepted KPI definition. This dual-mode design ensures PUE is both standardized where possible and flexible where necessary, improving energy analysis accuracy and supporting optimization actions.

For FusionCol8000-A230, the “two systems” part is correct: Huawei’s quick guide explicitly states that theindoor and outdoor units consist of two independent cooling systems, which is the basis for redundancy and staged capacity control.

However, the rest of the statement (“each system uses three compressors connected in parallel and two EEVs”) is not supported as a fixed, universal configuration in the installation/commissioning guide text that is available here. In Huawei smart cooling designs, compressor quantity and the number of electronic expansion valves (EEVs) aremodel- and configuration-dependentand are tied to how the refrigerant circuit is partitioned (for example, multiple compressor stages for capacity modulation, and one or more EEVs for different evaporator branches). Because the documentation we can directly verify confirmstwo independent systemsbut doesnotconfirm “three compressors per system” as an explicit requirement, the combined statement (two systems + specific compressor/EEV counts) is judgedfalse: one part is verified true, while the detailed component count cannot be confirmed as stated.

Wizard startup commissioning is designed to verify that the unit’skey controllable subsystemscan be started, regulated, and protected correctly. Conditions that prevent a subsystem from operating normally will directly cause commissioning failure. If thecondensate pump is stuck, the drainage function cannot be validated and water may accumulate in the drain pan, which is treated as a functional fault during commissioning. Ifindoor fan 2 drive is faulty, the fan system cannot meet airflow requirements or redundancy expectations, so the fan commissioning item fails. If theelectronic expansion valve (EEV) is not opened, refrigerant flow and cooling control cannot be established, so the cooling system commissioning fails because the unit cannot build a stable refrigeration cycle or reach expected operating parameters.

In contrast, thewater leakage ropeis aprotective detection accessoryused for leak sensing and alarming. While it is important for site safety and recommended for operation, its absence typically does not block the unit from completing the functional commissioning steps for fans, cooling, and drainage; it mainly affects leak detection coverage and related alarms rather than the basic startup commissioning pass/fail.

In Huawei delivery scenarios, apreinstalled servermeans the target software (for example, the NetEco platform and its required runtime components) has already been deployed and integrated on the server image before it is handed over for on-site commissioning. Because the installation media has already been applied, the on-site engineer’s work typically shifts from “software installation” to “environment verification and initialization,” such as confirming OS/service status, checking resource allocation, validating database and middleware health, verifying network planning (IP, gateway, DNS/NTP as required), and completing application-level initialization (site creation, user/role configuration, northbound interface settings, and device/model import if needed). In this case,downloading the full installation package is not a mandatory stepfor commissioning, because the package is mainly required when performing a fresh installation or reinstall/upgrade. However, standard practice is still to prepare supporting materials (patches, licenses, and compatibility documents) and ensure the preinstalled version matches the project baseline before acceptance.

In Huawei data center power distribution design, theSPD (Surge Protective Device)provides overvoltage surge protection for sensitive loads by diverting transient energy to ground through internal protection components. The SPD status indicator is used for O&M judgment of protection availability. When the indicator isgreen, it indicates the SPD protection components arewithin normal working conditionand the surge protection path remains effective. When the indicator turnsred, it typically means the SPD’s internal protection element hasdegraded or disconnected(end-of-life or failure after cumulative surges), and the device can no longer provide the rated protection level. In this condition, the distribution system is left exposed to surge risk, especially during thunderstorms, switching operations, or upstream disturbances. Therefore, Huawei O&M practice treats ared SPD indicator as a replacement trigger, requiring immediate corrective action: confirm alarm/status, ensure safe isolation following electrical safety procedures, and replace the SPD module to restore protection and maintain power system reliability.