UPS5000-A has built-in SNMP and ModBus card to reduce the management investment cost of customers.
The NetCol5000-A042H full-cabinet row-level air-cooled variable-ton precision air conditioner has the function of light-load dehumidification, which can satisfy the reliable dehumidification under the minimum load of 10, and avoid the hidden danger of condensation in the
low-load and high-humidity environment.
FusionModule2000--Integrated UPS has two configurations of single-channel MCCB and dual-channel ATS.
Huawei Precision Air Conditioner supports 1 indoor unit corresponding to multiple outdoor units (true or false).
The height of the UPS5000-E (25-75kVA) power module is only 2U.
Huawei Netcol air-cooled air conditioner -- one indoor unit can correspond to multiple outdoor units ()
NetCol5000-c row-level chilled water intelligent temperature control product has a light-load dehumidification function, which can meet the reliable dehumidification under a minimum load of 10%, and avoid the hidden danger of
condensation in a low-load and high-mix environment. ()
AHU can reduce PUE by applying natural cooling in high latitude regions, and can replace the chilled water solution as the main solution for large data centers ( )
The system efficiency of the UPS5000-E-75K half-height cabinet modular UPS is also 96% ( )
The top of the FusionModule2000 cabinet can be installed with stainless steel bridge or M-type wire duct ().
The smoke sensor used in the NetEco6000 management system cannot replace the smoke sensor in the fire protection system. /
The use of IGBT rectifier high-frequency machine, compared with SCR rectifier power frequency machine, can significantly reduce the harmonics of the input current and improve the input power factor.
Huawei's proprietary protocol BIN protocol is used for communication between the NetEco management system and the ECC800 collector ( ).
The minimum floor height of the computer room required by FusionModule2000 is 2.6 meters.
The backup time of UPS system is generally within 30min, so it is more reasonable to use the constant current method to calculate the battery capacity.
