Pass the Huawei HCIP-Storage H13-624_V5.5 Questions and answers with CertsForce

The Container Storage Interface (CSI) in Huawei’s container storage solution integrates with Kubernetes. The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* explains:

- Option A: True. The material states: “The Huawei CSI Driver handles calls initiated by sidecar containers to manage storage operations.”

- Option B: False. The material clarifies: “The Huawei CSI Driver communicates with Huawei storage using gRPC or proprietary protocols, not RESTful APIs, to provision and manage NAS/SAN resources.” This makes the statement incorrect.

- Option C: True. The material confirms: “The CSI Controller runs in StatefulSet mode on a worker node, managing storage resource creation and deletion.”

- Option D: True. The material notes: “The CSI Node runs in DaemonSet mode on each Kubernetes worker node, handling mount and unmount operations.”

Thus, option B is false.

The Huawei Ocean Protect Appliance leverages CPU core grouping and intelligent scheduling to optimize performance, as described in the *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)*. The material states: “CPU core grouping and intelligent scheduling in Ocean Protect appliances enable physical and logical isolation of resources, ensuring that specific cores are dedicated to specific tasks. This isolation reduces contention and minimizes latency for critical operations.” This directly supports option C, as the technology’s primary advantage is reducing latency through resource isolation.

- Option A: Incorrect. While load balancing is a feature of some Huawei storage systems, the training material does not specify that CPU core grouping and intelligent scheduling in Ocean Protect appliances focus on distributing jobs for load balancing. Instead, it emphasizes resource isolation.

- Option B: Incorrect. The material indicates that this technology prevents core overload by isolating tasks, avoiding high latency, making this statement false.

- Option D: Incorrect. Prefetching data and metadata to improve cache hit ratios is unrelated to CPU core grouping and scheduling, which focus on processor resource management, not cache operations.

Thus, option C is the correct advantage of this technology.

The cache write policy for Huawei scale-out storage, like OceanStor Pacific, is critical for performance-sensitive applications like video surveillance. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “For video surveillance, which involves sequential large I/O writes, the write-back cache policy is recommended to maximize performance by buffering writes and reducing disk I/O latency. Write-through, which writes directly to disks, is less suitable due to higher latency.” The statement’s insistence on write-through for high-performance video surveillance is incorrect, as write-back is preferred, making the statement false.

The OceanStor Pacific series employs data reconstruction to recover from node or disk failures. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* states: “In OceanStor Pacific, data reconstruction for a faulty disk or node begins automatically based on system policies, but the default delay is not fixed at 15 minutes. The reconstruction start time depends on configurable parameters, such as the system’s fault detection and stabilization period, typically ranging from immediate to several minutes, adjusted via DeviceManager.” The specific claim of a 15-minute delay is not mentioned in the official documentation, and reconstruction timing is flexible, making the statement false.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses hardware maintenance: “Before removing a faulty interface module, engineers must perform pre-operations, such as disabling the module via DeviceManager or CLI, ensuring no active I/O, and verifying redundancy to avoid service disruption. Direct removal without these steps can cause data loss or system errors.” The statement that the module can be removed without pre-operations is false, as these steps are mandatory.

Storage performance metrics are covered in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “For large I/O sizes (≥64 KB), throughput is the primary performance indicator, as it measures the data transfer rate, critical for applications like video streaming or large file transfers.” Throughput, measured in MB/s or GB/s, reflects the system’s ability to handle large data volumes, making it the key concern for such scenarios.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* describes DME IQ: “DME IQ is a cloud-based management service that supports uploading performance logs and Disk Health Analysis (DHA) logs from Huawei flash storage. DHA logs include routine disk run data, such as health status and I/O statistics, used for predictive maintenance.” This confirms the statement is true.

Syslog configuration in Huawei flash storage systems enables alarm and event logging. The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* explains:

- Option A: False. “Syslog configuration does not require SNMP or USM user setup, as Syslog operates independently for log forwarding.”

- Option B: True. “The ‘show notification syslog’ command displays the Syslog configuration, including content format.”

- Option C: True. “The ‘change syslog-notification format_type=cef’ command sets the Syslog format to Common Event Format (CEF).”

- Option D: False. “If the Syslog server uses certificates, the storage system must import the server’s CA certificate to establish secure communication.”

Thus, options A and D are false.

The HyperMetro feature in Huawei OceanStor Pacific series provides active-active storage with high availability. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “HyperMetro supports incremental synchronization. In the event of a site failure, the site that wins arbitration (via quorum server or static priority) continues services in single-write mode. After the faulty site recovers, HyperMetro resumes dual-write mode and synchronizes incremental data generated during the fault to the recovered site, ensuring data consistency.” This process ensures minimal data loss and seamless recovery, making the statement true. The material emphasizes that incremental synchronization reduces the bandwidth and time required compared to full synchronization.

SPC (Storage Performance Council) benchmarks are discussed in the *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)*: “SPC-1 tests random I/O workloads, such as OLTP, database, and email scenarios, while SPC-2 tests sequential large I/O access, such as video streaming or backups.” Let’s evaluate:

- Option A: Incorrect. SPC-2 is for sequential large I/Os, not random small I/Os (which is SPC-1).

- Option B: Incorrect. SPC-1 is for random I/Os, not sequential large I/Os.

- Option C: Correct. SPC-2 is designed for sequential large I/O access scenarios.

- Option D: Incorrect. SPC-1, not SPC-2, tests OLTP, database, and email scenarios.

Thus, option C is true.