Pass the Huawei HCIP-Storage H13-624_V5.5 Questions and answers with CertsForce

The Distributed Parallel Client (DPC) in Huawei OceanStor Pacific systems enables parallel file access. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* explains: “When adding DPC nodes, engineers can manually add nodes using DeviceManager by entering the management IP address of the node, not the service IP address. The management IP is used to establish control plane communication for node integration.” The service IP address is used for data access by clients, not for node creation or management tasks. Therefore, the statement that the engineer can add a node using the service IP address is false.

This question focuses on CLI operations for Huawei OceanStor Pacific scale-out storage systems. The *HCIP-Storage V5.5 Training Material (Module 3: Scale-Out Storage Technologies)* provides guidance on CLI access modes: “To switch from the user view to the developer view on the CLI for OceanStor Pacific systems, the command ‘change user_mode current_mode user_mode=developer’ is used. This command elevates the user’s privilege level to access advanced configuration and debugging options.” Let’s evaluate the options:

- Option A: Incorrect. The command `change domain ad_manager` relates to Active Directory management, not view switching.

- Option B: Incorrect. The command `change dns general` configures DNS settings, not user modes.

- Option C: Correct, as it matches the documented command for switching to developer view.

- Option D: Incorrect. The command `change nas_Idap` configures LDAP settings for NAS services, not CLI view modes.

Thus, option C is the correct command.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* addresses performance issue demarcation: “If the latency on the compute side is significantly higher than on the storage side, the issue is likely outside the storage system, such as in the host, network, or application layer. If the storage side showed high latency (e.g., due to disk performance limits), it would be reflected in the STORAGE metrics.” The statement incorrectly attributes the issue to the storage system, as higher compute-side latency points to external factors, making it false.

This question pertains to the configuration of basic storage services in Huawei OceanStor Dorado series storage systems. According to the *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)*, basic service configuration involves essential steps to enable storage access for hosts. The material outlines the following:

- Configuring connectivity between a host and the storage system (Option A) is mandatory, as it involves setting up physical or logical connections (e.g., Fibre Channel or iSCSI) to allow the host to communicate with the storage system. Without this, no storage services can be accessed.

- Creating a mapping (Option C) is also mandatory, as it maps LUNs to hosts or host groups, enabling the host to access specific storage resources. The material states: “Mapping is a critical step to associate LUNs with hosts for service access.”

- Creating a port group (Option B) is optional. Port groups are used to organize front-end ports for specific purposes (e.g., load balancing or zoning), but they are not always required, especially in simpler configurations where default port settings suffice.

- Creating a LUN group (Option D) is optional. LUN groups simplify management by grouping multiple LUNs for mapping, but they are not mandatory if LUNs are mapped individually.

Thus, options B and D are optional operations, as they are not always required for basic service configuration.

The multi-tenant feature in Huawei’s flash storage systems, such as OceanStor Dorado, is designed to isolate resources for different tenants to ensure data security and privacy. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* explains: “The multi-tenant feature isolates both block and file resources, ensuring that tenants cannot access each other’s LUNs or file systems. This is achieved through logical partitioning and access control mechanisms.” The statement in the question claims that tenants cannot access each other’s LUNs but can access each other’s file systems, which contradicts the official documentation. The material emphasizes that file systems, like LUNs, are isolated per tenant, and cross-tenant access is prevented unless explicitly configured (e.g., through shared namespaces, which is not the default behavior). Therefore, the statement is false.

The SmartMigration feature in Huawei OceanStor Pacific enables data migration between storage resources. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* explains: “The split mode and migration rate of a SmartMigration task can be modified only when the task is in certain statuses, such as Interrupted, Paused, or Faulty. When the task is in the Migrating status, changes to split mode or migration rate are not allowed, as the system is actively transferring data.” This is because modifying parameters during active migration could disrupt the process or cause data inconsistency. Let’s evaluate:

- Option A: Interrupted allows changes, as the task is stopped.

- Option B: Paused allows changes, as the task is temporarily halted.

- Option C: Faulty allows changes, as the task is not actively running.

- Option D: Migrating does not allow changes, as the task is in progress.

Thus, option D is the status that prevents changes.

Configuring file services in Huawei scale-out storage systems, such as OceanStor Pacific, involves specific steps for standard protocols like NFS or CIFS. The *HCIP-Storage V5.5 Training Material (Module 4: Storage Design and Implementation)* states: “To configure file services, the engineer must create a converged storage pool to allocate resources, create namespaces for organizing file systems, and enable file services on the relevant nodes. The Distributed Parallel Client (DPC) is optional and used for high-performance parallel file access, not a requirement for standard protocol scenarios.” Let’s evaluate:

- Option A: Not required. DPC is not mandatory for standard file service protocols.

- Option B: Required. A converged storage pool is needed to provide storage capacity.

- Option C: Required. Namespaces organize file service resources.

- Option D: Required. Enabling file services on nodes activates the protocols.

Thus, option A is the action not needed.

The *HCIP-Storage V5.5 Training Material (Module 5: Storage System Maintenance and Troubleshooting)* covers power management:

- Option A: True. “Correct expansion cable connections are required before power-on to ensure proper operation.”

- Option B: True. “The BMC system allows powering on controller enclosures via the external management IP when none are powered on.”

- Option C: False. “After an emergency power-off, the storage system is powered on via DeviceManager, CLI, or BMC, not by pressing the controller enclosure’s power button, which is used for normal power-on.”

- Option D: True. “In OceanStor Dorado 8000, powering on a controller enclosure automatically powers on cascaded disk enclosures.”

Thus, option C is false.

SmartDedupe and SmartCompression are data reduction technologies in Huawei all-flash storage systems, such as OceanStor Dorado. The *HCIP-Storage V5.5 Training Material (Module 2: Flash Storage Technologies)* provides details:

- Option A: True. The material states: “Post-process compression involves writing data to storage media first, then reading it back for compression during idle periods.”

- Option B: True. The material confirms: “Inline deduplication divides data into blocks and calculates fingerprints to identify duplicates before writing.”

- Option C: False. The material clarifies: “Similarity-based deduplication, whether inline or background, requires dividing data into blocks to calculate fingerprints for similarity detection. Direct calculation without block division is not supported.” This makes the statement incorrect.

- Option D: True. The material notes: “Backup storage supports deduplication and compression for file systems to optimize space usage.”

Thus, option C is false.