A customer has two HPE ProLiant Gen10 servers. They both require firmware installation.
Which HPE tool should you recommend to performing this task?
Match the speed and protocol with the appropriate component.
A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?
A customer’s backup administrator is responsible for maintaining and coordinating all nightly backups of the company’s 30 servers.
Which HPE product can be used as the primary interface to orchestrate all backup targets and Catalyst copy functions?
A customer needs to move from their traditional tape-based backup infrastructure to a standalone application to disk based backup solution using HPE StoreOnce. The environment does not use a hypervisor.
The customer has the following goals for their long-term backup retention:
retain data for over two years at low cost
data is archival and rarely accessed, if ever
Which HPE StoreOnce components can help meet the customer goals in the most cost effective manner? (Choose three.)
Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?
Which protocol can be used to access a shared directory on a network-attached storage device?
A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?
A customer has a single HPE ProLiant Gen 10 server.
Which embedded management tool should they use to monitor the server?
A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.
Which command can be used in the CLI to perform this operation?
