Clients on the 10.0.10.0/24 network must connect to the server at 10.0.20.100. Based on this image, what static route must you add to the Firebox for traffic to reach the server? (Select one.)
When configuring static routing on a WatchGuard Firebox, the static route table must specify a destination network or host address and the next-hop IP gateway through which that destination can be reached. The gateway must be directly reachable via an existing Firebox interface on the same broadcast subnet. In the network topology shown, the Firebox has directly connected interfaces on Eth1 (10.0.10.1/24) and Eth2 (10.0.2.1/24). The server resides behind an internal router on an indirect subnet: 10.0.20.0/24. The Firebox has no direct knowledge of 10.0.20.0/24. The intermediate router possesses an interface facing the Firebox with the IP address 10.0.2.254, which sits directly on the Firebox Eth2 subnet (10.0.2.0/24). Therefore, to steer traffic destined for 10.0.20.0/24 correctly, the Firebox administrator must configure an IPv4 static route specifying the destination network as 10.0.20.0/24 and the next-hop gateway as 10.0.2.254. Both options B and E are textually identical in the source exam, with B being the primary correct selection.
Chosen Answer:
This is a voting comment (?). You can switch to a simple comment. It is better to Upvote an existing comment if you don't have anything to add.
Submit