A frequent challenge Implementation Engineers face in the field is arriving onsite for a physical deployment only to discover that the customer's networking team has not yet provisioned the Top-of-Rack (ToR) switches, routed the management VLANs, or provided active copper connections for the array's eth0 and eth1 ports.

Despite this lack of upstream network readiness, the physical installation and logical initialization of the FlashArray can still successfully proceed. The Implementation Engineer can power on the chassis, connect a laptop directly to the primary controller's serial console port, and run the puresetup newarray script. By utilizing the --skip-network-tests flag, the engineer forces the array to accept the configured IP addresses and initialize the storage cluster without requiring an active external network connection.

However, the operational consequence of this scenario is that the customer will be unable to log in to the array . While the array is fully built and technically running in the rack, the lack of provisioned management network ports means there is no physical path for the customer to access the web-based Purity GUI, establish an SSH session, or connect via the REST API. Consequently, they cannot provision volumes, configure host groups, or monitor the system until the network team finally activates the switch ports and patches the cables.