CWNP CWDP-304 Exam Questions Free Practice Test

Viewing page 9 out of 9 pages

Viewing questions 81-90 out of questions

Questions # 81:

What best describes ensuring coverage requirements in a deployed WLAN?

Options:

Measuring the signal strength and number of APs at each location and comparing it to the requirement specifications

Verifying that the WLAN can be seen from all required locations

Verifying that you can connect to the WLAN from all required locations with the least capable device

Verifying that a 3x3:3 gaming laptop can connect to the WLAN from all required locations

Expert Solution

Questions # 82:

You have initiated a site survey to be performed and the team has been onsite and is halfway through gathering the necessary data.

The project sponsor just asked you to make sure the WLAN supports radio frequency identification (RFID) location tracking. How would you possibly characterize this situation?

Response:

Options:

Scope creep has occurred.

The 802.3af RTLS standard should be incorporated into the AP configuration.

The 802.11g standard incorporates location tracking.

Any WLAN will support location tracking.

The power requirements on the UPS need to be evaluated.

Expert Solution

Questions # 83:

What are some common problems with short (12 or fewer characters) ASCII passphrases in WPA/WPA2-Personal networks?

Response:

Options:

They are more susceptible to dictionary attacks than longer passphrases.

They lead to weak group keys in a BSS.

They only produce a 64-bit PMK instead of a 256-bit PMK.

Very few AP and client vendors support entry of an ASCII-based passphrase.

Expert Solution

Questions # 84:

In 802.11, clients are required to be calibrated for RSSI and SNR reporting to:

Options:

Within +/−5 dB

Within +/−3 dB

Within +/−1 dB

Within +/−0.5 dB

Within +/−0.25 dB

No specific value

Expert Solution

Viewing page 9 out of 9 pages

Viewing questions 81-90 out of questions

Pass the CWNP CWDP Wi-Fi Design CWDP-304 Questions and answers with CertsForce