CWNP CWDP-304 Exam Questions Free Practice Test

Viewing page 1 out of 9 pages

Viewing questions 1-10 out of questions

Questions # 1:

One of your customers plans on providing wireless coverage to a warehouse facility. After performing an initial walkthrough, you collect the

following information:

The central part of the warehouse is between 400 and 600 feet (122 to 183 meters) from the warehouse switches mounted on the walls.

✑ The warehouse storage is composed of metallic racks with varying inventory levels and contents, from electronics and plastic toys to food

pallets and juice bottles.

✑ Workers need basic data coverage from their working location, and are not highly mobile. They usually work from one single aisle, and their

laptop is on a cart with wheels.

What would be your one recommendation to provide coverage to the central area of the warehouse?

Options:

Equip workers laptops with a directional antenna and install APs less than 328 feet (100m) away from the switch.

In this case, extend the cable length just beyond 328 feet (100 m) and position APs as close as possible to the central area of the

warehouse.

Position APs along the walls, and equip the APs with Yagi antennas to cover the central area.

Install APs for client access in the central area and use a mesh backhaul link to connect to the DS.

Questions # 2:

You have determined the best mounting locations for APs in a given installation. The facilities manager has asked you to change the locations for

several APs due to aesthetic concerns. You suggest mounting the APs in the ideal locations and painting them so they go unnoticed in the

environment.

What is a valid recommendation or consideration when painting APs?

Options:

Always use paints with metallic dye in them to prevent potential RF propagation impact.

Painting APs will significantly reduce the output power.

Painting APs may void the product manufacturer's warranty.

Most AP models for indoor environments come in a variety of form factors and colors. Painting is never recommended.

Questions # 3:

When using a predictive design tool, you have selected APs with an antenna gain 3 dBi and set the transmit power of the predicted APs to 25 mW.

What should be EIRP of the APs in the design?

Options:

11 dBm

6.25 mW

125 mW

17 dBm

Questions # 4:

When performing an indoor predictive site survey to make the WLAN planning and design cycle more efficient, what is a best practice for

configuration of the simulated APs in the predictive modeling software?

Options:

All simulated APs should be set to 20 MHz channels only.

Always use the default 2.2 dBi omnidirectional antenna patterns for simulated APs.

If dynamic RRM will be used, AP transmit power should be set to an estimated average level of the expected client devices, such as 25 mW.

Defining custom AP and antenna patterns will yield more accurate prediction data than the pre-configured vendor AP/antenna

combinations.

Questions # 5:

During a post-validation assessment, you have configured a client for 802.1X/EAP but it is not passing authentication. Which areas should you check in the WLAN configuration?

Response:

Options:

Whether the RADIUS server is online and configured for the matching port on the APs and WLAN controllers

Whether the RADIUS shared secret is properly configured on the supplicant and authentication server

Whether the authenticator is configured to support the EAP type(s) your client is configured for

Whether the client has a fully valid certificate

Questions # 6:

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure.

What should you do to prevent this?

Options:

Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken

Purchase and deploy new APs from a different vendor

Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11

Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result

Questions # 7:

What functions may be performed by a WIPS?(Choose all that apply.)

Response:

Options:

Distributed protocol analysis

Client access to the distribution system

Performance monitoring and response

Data forensics and analysis

Automated threat mitigation

Questions # 8:

While performing a validation site survey, you realize that overlapping channels are being used on the 2.4 GHz bad due to the automatic channel assignment algorithm of the WLAN infrastructure.

What should you do to prevent this?

Response:

Options:

Reconfigure the network to use static channel plans because automatic channel assignment algorithms are all broken

Purchase and deploy new APs from a different vendor

Reconfigure the automatic channel assignment settings to use only channels 1, 6, and 11

Leave it as it is; sometimes using all 11 channels in 2.4 GHz gives the optimum performance result

Questions # 9:

For what purposes are VPNs typically used in modern WLANs?(Choose all that apply.)

Response:

Options:

Remote AP tunneling to a corporate WLAN controller or VPN concentrator

Client device connectivity to corporate resources from unsecured public networks

Initial 802.11 authentication with the AP and subsequent data encryption

Tunneling APs and WLAN controllers to cloud-based management platforms

Tunneling APs and WLAN controllers to RADIUS and token servers

Bridging client connectivity in ad hoc networks

Questions # 10:

Given A project parameter defines a requirement or constraint (or a project that can be defined before any file imports or design actions. What is an example of a project parameter commonly available in WLAN design software?

Options:

AP locations

Minimum required signal strength

AP type selection

Floor plan

Viewing page 1 out of 9 pages

Viewing questions 1-10 out of questions

Pass the CWNP CWDP Wi-Fi Design CWDP-304 Questions and answers with CertsForce