Pass the Cisco CCNP Enterprise 300-430 Questions and answers with CertsForce

 The exhibit provided appears to be a floor map overlay with Cisco CleanAir Zone of Impact for interferers, which shows different areas affected by interference on a wireless network. The area labeled ‘A’ indicates the greatest impact on the wireless network due to its larger size compared with other zones, suggesting more significant interference or a stronger source of interference within this zone. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

 In Cisco CMX, to view active RFID tags, the engineer needs to enable the tracking of these tags within the system settings. This is typically done by selecting an option that allows for RFID tag tracking, which makes them visible on location-based services like the Detect and Locate window of Cisco CMX. By enabling this feature, the system starts to interpret signals from RFID tags and displays their location accordingly. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The issue with users configured for EAP-PEAP not being able to connect to the network, when a Cisco Wireless LAN Controller (WLC) is deployed using local EAP, typically points to a misconfiguration in the local EAP profile on the WLC. EAP-PEAP relies on a server-side certificate to create a secure TLS tunnel for the authentication process. If the local EAP profile is not correctly configured with the proper certificate or other necessary settings, the authentication process will fail, preventing users from connecting. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

For central web authentication with Cisco ISE in a Cisco AireOS WLC environment using auto-anchor for the guest network, the foreign WLC must have UDP ports 1812 and 1813 open to ISE for RADIUS authentication and accounting. Additionally, a downloadable preauth ACL on ISE is required to define the permissions for the guest user before authentication, and a local preauth ACL on the WLC is needed to restrict or allow traffic prior to authentication. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide, particularly the chapters on WLC configuration for guest access and integration with Cisco ISE for security and access control.

 IGMP snooping is a feature that allows a network switch to listen to the Internet Group Management Protocol (IGMP) network traffic. This feature enables the switch to identify the multicast streams to which hosts are interested and to forward multicast traffic intelligently. By enabling IGMP snooping on the Wireless LAN Controller (WLC), it ensures that multicast streams are only forwarded to the access points (APs) where clients are subscribed to them. Setting the AP multicast mode to a specific multicast address, such as 238.255.255.255, allows the WLC to send multicast traffic to APs using this address, which helps in efficient distribution of the multicast stream.

The remote LAN (RLAN) feature on the OfficeExtend Access Point (OEAP) is used to extend the wired network through more than one port. This allows the creation of a wired interface on the OEAP that can be associated with a specific VLAN, providing connectivity for wired devices at remote locations. References: CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide

The correct command set for configuring a Cisco Catalyst 9800 Series Wireless Controller so that the client traffic enters the network at the AP switch port is Option C:

config terminal

wireless profile policy [policy name]

no central switching

end

This configuration disables central switching, which means that client traffic will be locally switched at the access point level rather than being sent through the controller. This is useful in scenarios where local switching is preferred due to reasons such as reducing latency or conserving bandwidth on WAN links. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )

 The exhibit provided appears to be a floor map overlay with Cisco CleanAir Zone of Impact for interferers, which shows different areas affected by interference on a wireless network. The area labeled ‘A’ indicates the greatest impact on the wireless network due to its larger size compared with other zones, suggesting more significant interference or a stronger source of interference within this zone. References := ( CCNP Enterprise Wireless Design ENWLSD 300-425 and Implementation ENWLSI 300-430 Official Cert Guide )