BICSI INSTC_V8 Exam Questions Free Practice Test

Viewing page 4 out of 5 pages

Viewing questions 31-40 out of questions

Questions # 31:

Which type of cabling is installed between a main cross connect and a horizontal cross connect?

Options:

Second-level backbone

First-level backbone

Horizontal

Expert Solution

Questions # 32:

According to BICSI guidelines, which of the following best describes the maximum pulling tension recommended for a 4-pair UTP cable during installation (without using special pulling grips)?

Options:

11 kg (25 lb)

22 kg (50 lb)

44 kg (100 lb)

66 kg (145 lb)

Expert Solution

Questions # 33:

What is the bend radius requirement for optical fiber cable when the cable is at rest?

Options:

10 times the cables outside diameter

15 times the cables outside diameter

20 times the cables outside diameter

Expert Solution

Questions # 34:

What is the minimum recommended height that should be used when mounting a plywood back board in a telecommunication space?

Options:

100 mm (4")

AFF 150 mm (6")

AFF 200 mm (8")

AFF 300 mm (12") AFF

Expert Solution

Questions # 35:

Which type of optical fiber cable should be color coded with a RED outer cable sheath?

Options:

Dispersion-shifted SM optical fiber

MM optical fiber with 50 um core diameter (laser-optimized)

Polarization maintain SM optical fiber

MM optical fiber with 50 um core diameter

Expert Solution

Questions # 36:

Which of the following is used to express system gain and loss?

Options:

Ohms

Henries

Farads

Decibel (dB)

Expert Solution

Questions # 37:

When labeling patch panels, which of the following is MOST aligned with TIA-606 and BICSI best practices?

Options:

Label each port sequentially by row (e.g., 1-24, then 25-48, etc.)

Assign labels based on random color coding for each port

Only label the left-most and right-most ports

Use building zone references, omitting port identifiers

Expert Solution

Questions # 38:

If a conduit run between two pull boxes has two 90-degree bends and measures 23 m (75 ft) total in length, what is the BEST way to comply with BICSI recommendations if you need to add a third 90-degree bend?

Options:

Lubricate the conduit heavily and pull the cable in one continuous run

Replace the entire run with larger conduit

Add an appropriately placed pull box or intermediate point

Use a flexible metallic conduit for the final bend

Expert Solution

Questions # 39:

Which of the following is an ACCEPTABLE practice for labeling telecommunications infrastructure per TIA-606 labeling standard and BICSI best practices?

Options:

Using color-coded heat shrink directly on the copper conductors

Affixing labels on the cables within 150 mm (6 in) of the termination point

Handwriting labels on a piece of tape around the cable bundle

Labeling only the patch panels and leaving cables unlabeled

Expert Solution

Questions # 40:

Which of the following is a benefit of air-blown optical fiber cable?

Options:

It requires less testing than other types of cables

It can be recovered and reused

It is significantly cheaper than other types of cables

Expert Solution

Viewing page 4 out of 5 pages

Viewing questions 31-40 out of questions

Pass the BICSI Cabling Installation INSTC_V8 Questions and answers with CertsForce