Riverbed 299-01 Exam Questions Free Practice Test

Viewing page 1 out of 8 pages

Viewing questions 1-10 out of questions

Questions # 1:

Trace clips that no longer have data because their packet data and trend data is no longer available in the parent capture job trace:

Options:

Appear with a red lightning bolt icon within Cascade Pilot.

Appear with a lock icon within Cascade Pilot.

Appear with a grey lightning bolt icon within Cascade Pilot.

Appear with a yellow lightning bolt icon within Cascade Pilot.

Appear with the trace clip name in red text within Cascade Pilot.

Expert Solution

Questions # 2:

On the Cascade Profiler, when importing a switch mitigation device list, it needs to be in the following format:

Options:

host_name, device_type, read_only_community_string, write_community_string

host_name, IP_address, read_only_community_string, write_community_string

host_name, IP_address, device_type, read_only_community_string, write_community_string

host_name, IP_address, device_type, read_only_community_string, write_community_string, pass phrase

Expert Solution

Questions # 3:

On an Enterprise Profiler, which Cascade software module usually runs on hardware with another software module, but can be placed on its own hardware to support extremely large clusters?

Options:

Event Manager

Dispatcher

User Interface

Database

Expert Solution

Questions # 4:

Which TCP port is used for Cascade Profiler web based management interfaces?

Options:

80/tcp

8080/tcp

8090/tcp

443/tcp

22/tcp

Expert Solution

Questions # 5:

On the Cascade Shark appliance, packet de-duplication should be enabled when:

Options:

Capturing packets from a SPAN-Port/Port-Mirror whose configuration may generate duplicate packets

Capturing packets from an aggregating TAP

Removing duplicate flows across multiple interfaces

Capturing packets from a 10GB link

Expert Solution

Questions # 6:

Technologies used for switching traffic between Virtual Machines under ESXi include:

Options:

Traffic between Virtual machines is not switched; it is routed by the standard vRouter included with ESXi

A standard or distributed vSwitch which comes with ESXi must be used, there is not 3rd party software available

A 3rd party virtual switch is required such as the CISCO Nexus 1000v as no standard vSwitch exists with ESXi

The included standard vSwitch of the CISCO Nexus 7000

The included standard vSwitch or the CISCO Nexus 1000v

Expert Solution

Questions # 7:

Is there a way to look at who owns the Domain for an external IP Address shown in the Cascade Profiler GUI?

Options:

No.

Yes, you can do this with the "ARIN" lookup in "external links". The customer can also add additional external links if they have other sites they use to look up IP Addresses.

This is available as a column in any report that displays the IP Address.

This is available under IP Host Group Type.

Expert Solution

Questions # 8:

If a VLAN SPAN (VLAN101) is configured and monitored by Cascade Shark, which of the following is true? (Select 2)

Options:

Inter VLAN101 traffic will be monitored; Intra VLAN101 traffic will not.

Intra VLAN101 traffic will be monitored; Inter VLAN101 traffic will not.

Both inter and intra VLAN101 traffic will be monitored.

It is a best practice to configure the Cascade Shark monitoring port (the SPAN destination) with 'deduplication' enabled.

It is a best practice to configure the Cascade Shark monitoring port (the SPAN destination) without 'deduplication' enabled.

Expert Solution

Questions # 9:

Which of the following are TRUE concerning packet capture jobs on the Cascade Shark appliancE. (Select 4)

Options:

Packets can be captured from multiple capture ports on one Cascade Shark appliance.

The maximum length the packet data can be specified.

Packets can be filtered on host IP addresses.

SSL traffic can be decoded if the appropriate certificate are loaded in the Cascade Shark appliance.

The maximum storage bandwidth for the job can be specified in bits/sec.

Multiple packet capture jobs can run concurrently.

Expert Solution

Questions # 10:

When you modify a filter in Cascade Pilot:

Options:

Changes are saved only in the View to which the filter has been applied.

The modified filter is saved on the machine on which Cascade Pilot is running.

The modified filter is saved on any Cascade Shark that Cascade Pilot is connected to.

The changes are lost when you close Cascade Pilot.

Expert Solution

Viewing page 1 out of 8 pages

Viewing questions 1-10 out of questions

Pass the Riverbed RCSP-NPM 299-01 Questions and answers with CertsForce