Pass the RedHat RHCE RH302 Questions and answers with CertsForce

At exam Lab example.com domain resides on 172.24.0.0/16 Network and my133t.org resides on 172.25.0.0/16 Network.

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 172.24.0.0/255.255.0.0

acl denynet src 172.25.0.0/255.255.0.0

#Default:

# http_access deny all

#Under Herehttp_access allow allownet

http_access deny denynet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

Do the following steps as:

1.vi /etc/security/access.conf

-:john:LOCAL

2.vi /etc/pam.d/system-auth

accountrequired/lib/security/pam_access.so

/etc/security/access.conf file helps to allow or deny login to users on the basis of origin.

Syntax of /etc/security/access.conf

permission : users : origins

The first field should be a "+" (access granted) or "-" (access denied) character.

The second field should be a list of one or more login names, group names, or ALL (always matches). A pattern of the form user@host is matched when the login name matches the "user" part, and when the "host" part matches the local machine name.

The third field should be a list of one or more tty names (for non-networked logins), host names, domain names (begin with "."), host addresses, internet network numbers (end with "."), ALL (always matches) or LOCAL (matches any string that does not contain a "." character).

In our example denied to john user to login locally.

Do the following steps as:

1.vi /etc/vsftpd.ftpusers

user1

user2

2.service vsftpd start| restart

Using /etc/vsftpd.ftpusers file we can deny to certain users to access files via ftp. As well as there is another file named /etc/vsftpd.user_list can be used to allow or to deny to users.

At exam Lab example.com domain resides on 192.168.0.0/24 Network and cracker.org resides on 192.168.1.0/24 Network.

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl denynet src 192.168.1.0/255.255.255.0

#Default:

# http_access deny all

#Under Herehttp_access allow allownet

http_access deny denynet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

Do the following steps as:

1.vi /etc/samba/smb.conf

[global]

netbios name=station?

workgroup = mygroup

server string=Share from Linux Server

security=user

smb passwd file=/etc/samba/smbpasswd

encrypt passwords=yes

[data]

path=/data

writable=no

public=no

browsable=yes

write list= user1 user2

2.smbpasswd –a user1

3.smbpasswd –a user2

……..

4.service smb start | restart

5.chkconfig smb on

Samba servers helps to share the data between linux and windows. Configuration file is /etc/samba/smb.conf. There are some pre-defined section, i. globaluse to define the global options, ii. Printersuse to share the printers, iii. homesuse the share the user’s home directory.

Security=uservalidation by samba username and password. May be there are other users also. To allow certain share to certain user we should use valid users option.

smbpasswdHelps to change user’s smb password. –a option specifies that the username following should be added to the local smbpasswd file.

If any valid users option is not specified, then all samba users can access the shared data. By Default shared permission is on writable=no means read only sharing. Write list option is used to allow write access on shared directory to certain users or group members.

Do the following steps as:

1.vi /etc/hosts.deny

vsftpd:ALL EXCEPT .example.com

or

1.vi /etc/hosts.deny

vsftpd:ALL

2.vi /etc/hosts.allow

vsftpd:.example.com

We can secure the services using tcp_wrappers. There are main two files, /etc/hosts.allow and /etc/hosts.deny.

There will be three stage access checking

- Is access explicitly permitted? Means permitted from /etc/hosts.allow?

- Otherwise, Is access explicitly denied? Means denied from /etc/hosts.deny?

- Otherwise, by default permit access if neither condition matched.

To deny the services we can configure /etc/hosts.deny file using ALL and EXCEPT operation. Pattern of /etc/hosts.allow and /etc/hosts.deny file is:

Demon_list:client_list:options

In Client list can be either domain name or IP address.

Note: In Exam Lab there will be two different domain example.com which is known as local domain and another is cracker.org which is called non trusted domain. So only from .example.com means allow only to example.com deny to every one.

Do the following steps as:

1.vi /etc/squid/squid.conf

#detault:

http_port8080

#Recommended minimum configuration:

# Near the src acl src section

acl allownet src 192.168.0.0/255.255.255.0

acl denynet src 192.168.1.0/255.255.255.0

#Default:

# http_access deny all

#Under Herehttp_access allow allownet

http_access deny denynet

2.service squid start

3.chkconfig squid on

squid is a proxy caching server, using squid we can share the internet, block the internet, to certain network. First we should define the port for squid, the standard port for squid is 3128. We can run squid on different port by specifying http_port portnumber.

To block or allow the Internet access to hosts, we should create the acl (Access Control List). In this file we can specify only the IP address.

Example: acl aclname src IP/NetmaskAfter creating acl we can block or allow the internet to specified acl.

http_access allow | deny alcname

Do the following steps as:

1.vi /etc/security/access.conf

-:jack:ALL EXCEPT station10.example.com

2.vi /etc/pam.d/system-auth

accountrequired/lib/security/pam_access.so

/etc/security/access.conf file helps to allow or deny login to users on the basis of origin.

Syntax of /etc/security/access.conf

permission : users : origins

The first field should be a "+" (access granted) or "-" (access denied) character.

The second field should be a list of one or more login names, group names, or ALL (always matches). A pattern of the form user@host is matched when the login name matches the "user" part, and when the "host" part matches the local machine name.

The third field should be a list of one or more tty names (for non-networked logins), host names, domain names (begin with "."), host addresses, internet network numbers (end with "."), ALL (always matches) or LOCAL (matches any string that does not contain a "." character).

The EXCEPT operator makes it possible to write very compact rules

Do the following steps as:

1.vi /etc/vsftpd/vsftpd.conf

anon_upload_enable=yes

chown_uploads=yes

chown_username=username

2.service vsftpd start| restart

3.directory owner should be ftp user: chown ftp directory path allowedto upload files.

4.Write permission should be set to owner user.

By default anonymous user can only download files from the ftp. Should write anon_upload_enable=yes to enable anonymous upload files. Default Directory for anonymous is /var/ftp.

Do the following steps as:

1.vi /etc/samba/smb.conf

[global]

netbios name=station?

workgroup = mygroup

server string=Share from Linux Server

security=user

smb passwd file=/etc/samba/smbpasswd

encrypt passwords=yes

hosts allow=192.168.0.

[data]

path=/data

writable=yes

public=no

browsable=yes

2.service smb start| restart

3.chkconfig smb on

Samba servers helps to share the data between linux and windows. Configuration file is /etc/samba/smb.conf. There are some pre-defined section, i. globaluse to define the global options, ii. Printersuse to share the printers, iii. homesuse to share the user’s home directory.

Security=uservalidation by samba username and password. May be there are other users also. To allow certain share to certain user we should use valid users option.

smbpasswdHelps to change user’s smb password. –a option specifies that the username following should be added to the local smbpasswd file.

If any valid users option is not specified, then all samba users can access the shared data. By Default shared permission is on writable=no means read only sharing. Write list option is used to allow write access on shared directory to certain users or group members.

To allow access the shared directory only from certain network or hosts, there is a option hosts allow= host or network. If this option is applied on global option, then it will apply to all shared directory.