Pass the Qlik Qlik Replicate QREP Questions and answers with CertsForce

To run Analytics under Qlik Enterprise Manager, it is required to have aPostgreSQL Databaseinstalled. This is because the Analytics data for Qlik Enterprise Manager is stored in a PostgreSQL database.Before using the Analytics feature, you must ensure that PostgreSQL (version 12.16 or later) is installed either on the Enterprise Manager machine or on a machine that is accessible from Enterprise Manager1.

Here are the steps and prerequisites for setting up Analytics in Qlik Enterprise Manager:

Install PostgreSQL: The setup file for PostgreSQL is included with Enterprise Manager, and it must be installed to store the Analytics data1.

Create a dedicated database and user: A dedicated database and user in PostgreSQL should be created, which will own the tables accessed by the Enterprise Manager Analytics module1.

Configure connectivity: Connectivity to the PostgreSQL repository must be configured as described in the Repository connection settings1.

Data collection and purging: Configure data collection and purging settings as described in the Analytics - Data collection and purge settings1.

Register a license: A Replication Analytics license is required to use Analytics.If you have a license, you can register it by following the procedure described in Registering a license1.

The other options provided, such as Qlik Replicate (A), Qlik Compose (B), and both Qlik Compose and Replicate (D), are not components that must be installed to run Analytics under Enterprise Manager.The essential component is the PostgreSQL Database ©, which serves as the backend for storing the Analytics data1.

Therefore, the verified answer isC. PostgreSQL Database, as it is the required component to run Analytics under Qlik Enterprise Manager1.

Qlik Replicate offers several methods for parallel load during a full load process to accelerate the replication of large tables by splitting the table into segments and loading these segments in parallel. The three primary ways Qlik Replicate allows parallel loading are:

Use Data Ranges:

This method involves defining segment boundaries based on data ranges within the columns. You can select segment columns and then specify the data ranges to define how the table should be segmented and loaded in parallel.

Use Partitions - Use all partitions - Use main/sub-partitions:

For tables that are already partitioned, you can choose to load all partitions or use main/sub-partitions to parallelize the data load process. This method ensures that the load is divided based on the existing partitions in the source database.

Use Partitions - Specify partitions/sub-partitions:

This method allows you to specify exactly which partitions or sub-partitions to use for the parallel load. This provides greater control over how the data is segmented and loaded, allowing for optimization based on the specific partitioning scheme of the source table.

These methods are designed to enhance the performance and efficiency of the full load process by leveraging the structure of the source data to enable parallel processing

To download the task diagnostic package in Qlik Replicate, you need to follow these steps:

Open the task from the overview in the Qlik Replicate Console.

Switch to theMonitorview.

Click on theToolstoolbar button.

Navigate toSupport.

SelectDownload Diagnostic Package1.

This process will generate a task-specific diagnostics package that contains the task log files and various debugging data that may assist in troubleshooting task-related issues. Depending on your browser settings, the file will either be automatically downloaded to your designated download folder, or you will be prompted to download it.The file will be named in the format__diagnostics__.zip12.

The other options provided do not accurately describe the process for downloading a diagnostic package in Qlik Replicate:

Bis incomplete and does not provide a valid path.

Cincorrectly suggests going to server settings and logging, which is not the correct procedure.

Dsuggests a method that is not documented in the official Qlik Replicate help resources.

Therefore, the verified answer isA, as it correctly outlines the steps to download a diagnostic package in Qlik Replicate12.

After a Qlik Replicate administrator creates a new task, runs a Full Load test, and turns on Change Processing, the method to test this task would be to:

Stop the task: This ensures that no active processes are running that could interfere with the testing.

Run -> Advanced Run Options: This step allows the administrator to access more specific settings that can control how the task is executed.

Start Change Processing Only: This option will start the Change Data Capture (CDC) phase without re-running the Full Load. It’s used to test the CDC mechanism specifically, ensuring that changes made at the source are captured and applied to the target correctly.

This method is supported by best practices in the Qlik community and documentation, which suggest using the Advanced Run Options to control the task’s behavior for testing purposes1. It allows the administrator to verify that the Change Processing is set up correctly and is functioning as expected without the need to reload the target or recreate the task entirely. This approach is efficient and effective for testing the CDC functionality in isolation.

The default port for Qlik Replicate Server on Linux is3552. This port is used for outbound and inbound communication unless it is overridden during the installation or configuration process. Here’s a reference to the documentation that confirms this information:

The official Qlik Replicate documentation states that “Port 3552 (the default rest port) needs to be opened for outbound and inbound communication, unless you override it as described below.” This indicates that 3552 is the default port that needs to be considered during the installation and setup of Qlik Replicate on a Linux system1.

The other options provided do not correspond to the default port for Qlik Replicate Server on Linux:

A. 3550: This is not listed as the default port in the documentation.

B. 443: This is commonly the default port for HTTPS traffic, but not for Qlik Replicate Server.

C. 80: This is commonly the default port for HTTP traffic, but not for Qlik Replicate Server.

Therefore, the verified answer isD. 3552, as it is the port designated for Qlik Replicate Server on Linux according to the official documentation1.

To change the Data Directory location on Windows for Qlik Replicate, the administrator needs to follow these steps after stopping the Qlik Replicate services:

E. Move the data directory to a new location: The first step is to physically move the data directory to the new desired location on the file system1.

A. Update the Windows Registry: After moving the data directory, the next step is to update the Windows Registry to reflect the new location of the data directory.This involves modifying theImagePathstring within theHKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servicesfor both the Qlik Replicate UI Server and Qlik Replicate Server services1.

F. Start the Attunity Replicate services: Once the data directory has been moved and the Windows Registry has been updated, the final step is to start the Qlik Replicate services again.This will allow Qlik Replicate to operate using the new data directory location1.

The other options are not part of the recommended steps for changing the Data Directory location:

B. Uninstall Qlik Replicate and reinstall: This is not necessary just for changing the data directory location.

C. Copy the data directory to a shared drive and keep all tasks running: It is not recommended to use a shared drive for the data directory, and tasks cannot run during this process since the services need to be stopped.

D. Stop the Attunity Replicate Ul Server and Attunity Replicate Server services: This is a prerequisite step that should have already been completed before proceeding with the data directory change.

For a complete guide on changing the Data Directory location on Windows, the official Qlik documentation provides detailed instructions and considerations1.

In Qlik Replicate, when multiple schema rename rules are applied, the final schema name isdetermined by the last applied setting that affects the schema name directly. Here’s how the process works:

Global Transformationto rename schema to ‘USER1’: This rule will initially rename the schema from ‘HR’ to ‘USER1’.However, this is not the final schema name as further changes are applied later in the task settings1.

Task Settings -> Target Metadatato enter the Target table schema as ‘USER2’: This setting overrides the previous global transformation rule and sets the target schema name to ‘USER2’.This is because the Target Metadata settings are applied after the Global Transformations and directly affect the target schema name1.

Global Transformationto add a new column named ‘SCHEMA’ with expression as ‘USER3’: While this rule adds a new column with a value of ‘USER3’, it does not change the schema name itself.It only affects the content of a column within the tables1.

Therefore, the final target schema name, after considering all the applied settings, isD. USER2.This is because the Target Metadata setting in the task settings has the final say on the target schema name, and it is set to 'USER2’1.

The Apply Exceptions data in Qlik Replicate is retained indefinitely by default. This means thatthe data related to apply exceptions, which includes error records and other relevant information, is not automatically purged after a certain period.

The retention of Apply Exceptions data is crucial for ongoing monitoring and troubleshooting of replication tasks. It allows administrators to review and address any issues that have occurred over the life of the task.

According to the Qlik Replicate documentation, theattrep_apply_exceptionstable, which records processing errors, does not have an automated deletion process.This table includes columns for the task name, table owner, table name, error time (in UTC), statement being executed when the error occurred, and the actual error message1.

This indefinite retention policy ensures that administrators have a complete historical record of all exceptions that have occurred, which can be invaluable for diagnosing and resolving issues with replication tasks. However, it’s important for administrators to manage the size of this table manually to prevent it from growing too large, which could potentially impact system performance.

For Qlik Replicate’s Change Data Capture (CDC) process, the valid source endpoint types include:

A. Classic Relational RDBMS: These are traditional relational database management systems that support CDC.Qlik Replicate can capture changes from these systems using log-based CDC tools which are integrated to work with most ETL tools1.

C. SAP ECC and Extractors: SAP ECC (ERP Central Component) and its extractors are also supported as source endpoints for CDC in Qlik Replicate.This allows for the replication of data changes from SAP’s complex data structures1.

The other options provided are not typically associated with CDC in Qlik Replicate:

B. MS Dynamics direct access: While Qlik Replicate can connect to various data sources, MS Dynamics is not commonly listed as a direct source for CDC.

D. Generic REST APIs Data Lake file formats: REST APIs and Data Lake file formats are not standard sources for CDC as they do not maintain transaction logs, which are essential for CDC to track changes.

For detailed information on setting up source endpoints and enabling CDC, you can refer to the official Qlik documentation and community articles that discuss the prerequisites and configurations needed for various source endpoints2345.

To set all incoming columns to match a single schema in Qlik Replicate, an administrator should use theGlobal Transformationsfeature. Here’s the process:

Navigate to theGlobal Transformationssection within the Qlik Replicate task settings.

Within Global Transformations, there is an option to define transformations that apply to all tables and columns being replicated.

Use theSchemaoption within Global Transformations to specify the target schema for all incoming columns.

This approach ensures that all incoming data conforms to a predefined schema, which is particularly useful when consolidating data from multiple sources into a single target schema.It allows for the standardization of column names, data types, and other schema-related attributes across all tables involved in the replication task12.

The other options provided do not directly address the requirement to set all incoming columns to match a single schema:

A. Table Selection - Schema: This option is more about selecting which tables and schemas to include in the replication task, rather than defining a global schema for all columns.

B. Global Transformations - Add FilterandC. Add Filter - Schema: While filters are used to specify conditions for data transformation or selection, they do not provide a means to globally set the schema for all incoming columns.

Therefore, the verified answer isD. Global Transformations - Schema, as it is the correct method to set all incoming columns to match a single schema in Qlik Replicate12.