Pass the Nutanix Nutanix Certified Professional (NCP) NCP-MCI-6.5 Questions and answers with CertsForce

http://www.vstellar.com/2019/01/10/ahv-networking-part-1 -basics/#:~:text=AHV%20Network%20Architecture&text=virbr0%20is%20an%20internal%20switch,virbr0)%20have%20IP%20address%20192.168.

A managed network is a type of network that can be created on an AHV cluster and allows VMs to automatically be assigned an IP address at creation time. A managed network uses the Nutanix IP Address Management (IPAM) service, which provides DHCP and DNS functionality for the VMs on the network. A managed network can be configured with a subnet range, a default gateway, and DNS servers. The IPAM service will allocate IP addresses from the subnet range to the VMs and register their hostnames in the DNS servers. The IPAM service will also release the IP addresses when the VMs are deleted or moved to another network1.

To create a managed network on an AHV cluster, the administrator can use Prism Element or Prism Central. The steps are as follows2:

In Prism Element, go to the Network Configuration page and click Create Network.

In Prism Central, go to the Networks page and click Create.

Enter a name and description for the network.

Select Managed as the network type.

Enter the subnet range, default gateway, and DNS servers for the network.

Optionally, enable VLAN tagging and enter a VLAN ID for the network.

Click Save.

According to the Nutanix Support & Insights web search result3, shadow clones are vDisk copies that are created by the cluster when a vDisk is read by multiple VMs. Shadow clones are immutable copies of a vDisk that are stored in different nodes in the cluster, and are used to improve read performance and reduce network traffic. Shadow clones are automatically created and deleted by the cluster, based on the demand and availability of resources.

This will allow the administrator to quickly identify VMs that are overprovisioned or underutilized based on their performance metrics.

https://www.nutanix.com/support-services/training-certification/certifications/certification-details-nutanix-certified-professional-multicloud-infrastructure-6_5

A bond is a logical interface that combines two or more physical interfaces on an AHV host. A bond provides high availability and load balancing for the network traffic of the host and its VMs. A bond can have different modes that determine how the traffic is distributed and how the bond handles failures of the physical interfaces. The most common bond modes are active-backup, active-active, and LACP1.

Nutanix recommends including at least two physical interfaces in every bond to ensure high availability and redundancy. If one of the physical interfaces fails or is disconnected, the other interface can take over the traffic without affecting the connectivity of the host or its VMs. Having at least two physical interfaces in a bond also allows for maintenance operations such as firmware upgrades or cable replacements without downtime2.

Nutanix does not recommend including NIC models from different vendors in the same bond, as this may cause compatibility issues or performance degradation. Nutanix also does not recommend using only one physical interface in a bond, as this provides no redundancy or load balancing benefits3.

https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-pc-install-scratch-c.html

 According to the Nutanix Support & Insights web search result4, Prism Central can be installed manually on an AHV cluster by using three disk images: boot, home, and data. These disk images must be downloaded from the portal for the Prism Central VM and uploaded to an image service on the AHV cluster. The boot image contains the operating system and kernel for Prism Central. The home image contains the configuration files and logs for Prism Central. The data image contains the database and application files for Prism Central.

A Compute Only node is a node that does not have any local storage devices and only provides compute resources to the cluster2. A Compute Only node does not run a CVM, but instead relies on the CVMs of other nodes to access the distributed storage fabric2

NTP service needs to be configured to ensure logs, alerts and information is consistent across clusters that are located in different countries. NTP stands for Network Time Protocol and it is used to synchronize the clocks of all the nodes in a cluster1. This helps to maintain accurate timestamps for logs, alerts and other information that are generated by Nutanix clusters1.

According to the web search results, one recommended configuration change to improve throughput for a custom backup application that requires a 2TB disk and runs on Windows is to span the 2TB disk across four vDisks. Spanning is a technique that allows you to create a single logical disk from multiple physical disks. Spanning can improve throughput by distributing I/O requests across multiple disks and reducing contention5. To span a disk across four vDisks, the administrator should create four vDisks of equal size (500 GB each) and attach them to the VM. Then, in Windows Disk Management, create a spanned volume from the four vDisks and format it as NTFS6.