Pass the Nutanix NCM-MCI NCP-MCI-6.10 Questions and answers with CertsForce

For cross-hypervisor DR failover (e.g., ESXi to AHV), Nutanix Guest Tools (NGT) must be installed on VMs to ensure proper configuration and recovery.

Option D (NGT must be installed on source guest VMs) is correct:

NGTensures correct reconfiguration of VM devices and networking settingsduring failover.

Ithandles disk and driver reassignmentsbetween ESXi and AHV.

Option A (Utilize delta disks) is incorrect:

Delta disks are used insnapshot optimization, not DR failover.

Option B (Deploy Legacy BIOS boot) is incorrect:

AHV prefers UEFI boot mode, and Legacy BIOS is not a requirement.

Option C (Use raw device mappings) is incorrect:

RDMs areVMware-specificand arenot used in AHV failover scenarios.

Windows Defender Credential Guard requires UEFI firmware and Secure Boot to function properly.

Option B (Enable UEFI with Secure Boot) is correct:

Credential Guardrequires a UEFI-based boot moderather thanLegacy BIOS.

Secure Boot ensures only trusted OS components load, reducing attack surface for credential theft.

Option A (Update vCPU to 8) is incorrect:

Increasing vCPUs does not impactCredential Guard compatibility.

Option C (Use Windows Server 2022) is incorrect:

Windows Server 2019supports Credential Guard; upgrading to 2022 isnot required.

Option D (Update Memory to 16GB) is incorrect:

Credential Guard has no minimum RAM requirementbeyond general OS needs.

The Nutanix ECA course provides guidance on performance monitoring and troubleshooting for VMs, including metrics to analyze when determining whether additional vCPUs are needed. The scenario involves a VM experiencing performance issues, with the cluster performing well overall, suggesting the issue is VM-specific.

Extract from Nutanix Enterprise Cloud Administration (ECA) Course Documents:

Module: Performance Monitoring, Section: VM Performance Metrics"To determine if a VM requires additional vCPUs, analyze VM CPU Usage and VM CPU Ready Time. High CPU Usage indicates the VM is under heavy load, while high CPU Ready Time suggests the VM is waiting for CPU resources, both justifying additional vCPUs."

Module: Troubleshooting, Section: VM Performance Issues"When a VM experiences performance issues, VM CPU Usage and VM CPU Ready Time are critical metrics. CPU Usage shows demand, while CPU Ready Time indicates contention or scheduling delays, helping determine if more vCPUs are warranted."

Explanation of Options:

A. VM CPU UsageThis is correct. VM CPU Usage measures the percentage of CPU resources the VM is consuming. High CPU Usage (e.g., consistently above 80–90%) indicates that the VM is under heavy load and may benefit from additional vCPUs to handle the workload. The ECA course emphasizes:"VM CPU Usage is the primary metric to assess whether a VM’s CPU allocation is sufficient for its workload."

B. VM CPU Ready TimeThis is correct. VM CPU Ready Time measures the time a VM is ready to run but waiting for CPU resources from the hypervisor due to contention or oversubscription. High CPU Ready Time (e.g., above 5–10%) suggests that the VM is not getting enough CPU cycles, and adding vCPUs could alleviate the issue. The ECA course notes:"High VM CPU Ready Time indicates CPU contention, often resolved by adding vCPUs or optimizing resource allocation."

C. Host Memory Swap Out RateThis is incorrect. Host Memory Swap Out Rate indicates memory pressure on the host, causing memory pages to be swapped to disk. While this can affect VM performance, it is unrelated to CPU performance and does not justify adding vCPUs. The ECA course states:"Host Memory Swap Out Rate is relevant for memory-related issues, not CPU allocation decisions."

D. Host CPU UsageThis is incorrect. Host CPU Usage measures the overall CPU utilization of the host, not the specific VM. Since the cluster is performing well overall, high Host CPU Usage is unlikely, and it does not directly indicate whether the VM needs more vCPUs. The ECA course clarifies:"Host CPU Usage is a cluster-wide metric and less relevant for diagnosing VM-specific CPU performance issues."

Additional Context from ECA:

Performance Monitoring Tools: In Prism Element or Prism Central, VM CPU Usage and CPU Ready Time can be monitored underVM > Monitoror through dashboards. These metrics provide insight into the VM’s CPU demand and contention.

Adding vCPUs: The ECA course advises caution when adding vCPUs, as over-allocation can increase CPU Ready Time due to scheduling overhead. However, if both CPU Usage and Ready Time are high, adding vCPUs is justified.

Supporting Reference from Web Results:

The Nutanix Bible (https://www.nutanix.com/go/the-nutanix-bible) supports: "For VM performance issues, analyze VM CPU Usage and CPU Ready Time to determine if additional vCPUs are needed, as these metrics directly indicate CPU demand and contention."

Receive Side Scaling (RSS) VirtIO-Net Multi-Queue improves network performance by distributing network processing across multiple CPU cores.

Option C (Enable RSS VirtIO-Net Multi-Queue) is correct:

This settingreduces CPU bottlenecksby allowing multiple queues to handle network packets.

It isessential for high-throughput network applications.

Option A (Add more vCPUs) is incorrect:

CPU resources are important, butwithout enabling RSS, additional vCPUs will not optimize network traffic distribution.

Option B (Enable AHV Turbo Technology) is incorrect:

AHV Turbo improvesdisk I/O, notnetwork I/O.

Option D (Add more RAM) is incorrect:

RAM does not directly impact network performance.

As per the Nutanix Prism Web Console Guide (v7.0), specifically at this page:

Expand Cluster - Node Discovery, it is clearly mentioned that:

“The expand cluster discovery step (finding nodes to add) requires that IPv6 multicast packets are allowed through the physical switch. Therefore, the expand cluster process does not work when IPv6 is disabled in your network.”

This directly confirms that for automatic discovery of new nodes, IPv6 multicast must be enabled and allowed on the physical switches connecting Nutanix nodes. This is a recent update in the cluster expansion discovery process that replaces the previous use of IPv4 multicast in earlier Nutanix AOS versions.

TheBully VMs Listview in Prism Central’sIntelligent Operationsidentifies VMs that are consumingexcessive resources(CPU, memory, or storage IO) and causing resource starvation for other VMs.

From theNutanix ECA documentation:

“Bully VMs List identifies virtual machines with high resource consumption, enabling administrators to investigate and take action to prevent performance degradation in other VMs.”

The other options:

A (Constrained VMs): Shows VMs that are being starved of resources.

C (Inactive VMs): Shows VMs that are using little to no resources.

D (Overprovisioned VMs): Shows VMs with allocated resources beyond actual usage.

During cluster expansion, Nutanix uses the Controller VM discovery service, which relies on multicast-based node advertisement. The internal architecture documentation states:

“Node discovery during cluster expansion requires IPv4 multicast to be enabled and permitted on the switching infrastructure.”

This allows new nodes to announce themselves to the existing cluster through standard Nutanix discovery packets.

IPv6 multicast is not used for node discovery. Matching AOS or hypervisor versions is recommended for compatibility but not required for discovery itself. These are post-discovery compatibility concerns, not prerequisites.

Thus, IPv4 multicast is required for automatic node discovery.

The most efficient way to move a VM’s storage to a container that has different storage optimization policies (like compression) is to perform aVM migrationto the target container. This operation ensures that all the VM’s vDisks are moved to the destination container and allows leveraging the configured optimizations on the Production container.

From theNutanix Enterprise Cloud Administration (ECA)course materials:

“VM migration to another storage container in Nutanix Prism Central is supported and can be performed with minimal disruption. When moving a VM to a new container, it inherits the storage optimization policies of that container, including compression, deduplication, and encryption.”

Furthermore:

“Migrations can be initiated at the VM level in Prism Central or Prism Element. This is the most streamlined method to ensure all vDisks for a VM are moved together, preserving data integrity and performance characteristics.”

Recreating the VM or vDisks would be cumbersome and require manual data copying, introducing potential risks and downtime.

After a Prism Central upgrade, IAM authentication settings may require reconfiguration.

Option D (Log in with a local admin account) is correct:

If IAM authentication fails, thelocal admin account must be usedto check domain settings.

Option A (Ping the Domain Controller) is incorrect:

Network connectivity is important, but theissue is likely related to IAM settings, not network reachability.

Option B (Check firewall port 9441) is incorrect:

Port 9441 is used forSSO authentication, butport issues usually result in login delays, not complete failures.

Option C (Validate signing certificate) is incorrect:

While certificates can cause issues,local admin login should always work.