Pass the Nokia Nokia Optical Network Services Expert 4A0-220 Questions and answers with CertsForce

RSVP-TE Notify message is a message type defined in the RSVP-TE protocol, which is an extension of the RSVP protocol for MPLS traffic engineering. RSVP-TE Notify message is used to inform non-adjacent nodes of LSP events, such as setup, modification, or teardown. This allows the nodes to update their local state information and perform actions based on the notification. For example, a Notify message can be used to trigger a fast reroute mechanism in case of a link or node failure12. References:

1: RFC 3473 - Generalized Multi-Protocol Label Switching (GMPLS) Signaling Resource Reservation Protocol-Traffic Engineering (RSVP-TE) Extensions

2: RFC 3471 - Generalized Multi-Protocol Label Switching (GMPLS) Signaling Functional Description

The SNC Nominal Route is the default or preferred route that is assigned to an LSP when it is created. The SNC Nominal Route is determined by the constraints that are specified by the user during the LSP creation process, such as cost, SRLG, color, bandwidth, protection, and regeneration. The user can modify the SNC Nominal Route in NFM-T by using the Constraint Wizard, which is a tool that allows the user to change the constraints for an existing LSP. The Constraint Wizard will then compute a new SNC Nominal Route based on the modified constraints and update the LSP accordingly34. References:

3: Nokia GMPLS-controlled Optical Networks Course | Nokia

4: Nokia Network Functions Manager for Transport User Guide | Nokia

A Nominal Route in a GMPLS network is the optimal path that meets the Traffic Engineering (TE) constraints for a given LSP request. A Nominal Route is calculated by the NFM-T using the Constrained Shortest Path First (CSPF) algorithm, which takes into account parameters such as bandwidth, latency, priority, protection type, and other QoS attributes. A Nominal Route is stored in the NFM-T database and can be used to provision LSPs over the network. A Nominal Route can differ from the Current Route, which is the actual path that the LSP is taking at a given time, due to network changes or failures. References : Nokia GMPLS-controlled Optical Networks Course | Nokia, Nokia Advanced Optical Network Management with NFM-T Course | Nokia

The GMRE functionality is guaranteed in Nokia equipment by controller redundancy. The controller is the hardware component that runs the GMPLS software and controls the switching fabric of the node. Each node has two controllers, one active and one standby, that synchronize their states and databases. If the active controller fails, the standby controller takes over and ensures the continuity of the GMRE functionality. References : Nokia GMPLS-controlled Optical Networks Course | Nokia, 1830 Photonic Service Switch (PSS) | Nokia

Constrained Shortest Path First (CSPF) is an extension of the shortest path first (SPF) algorithm that is used to find the best path for a Label Switched Path (LSP) in a GMPLS network. CSPF takes into account additional constraints such as bandwidth, latency, priority, or node or link inclusion or exclusion. CSPF works by pruning those links that do not meet the specified constraints and then applying the SPF algorithm to the remaining links. This way, CSPF can find a path that satisfies both the shortest distance and the constraints. References : Constrained Shortest Path First - Wikipedia, Constrained Shortest Path First (CSPF) - Metaswitch

GMPLS stands for Generalized Multi-Protocol Label Switching, which is a protocol suite that extends MPLS to control different types of switching technologies, such as optical, TDM, and packet switching1. The meaning of Generalized in GMPLS is that it can be used for traffic types other than data packets, such as wavelengths, time slots, or fibers2. GMPLS can also use implicit labels that are derived from the physical properties of the data stream, such as wavelength or timeslot, instead of explicit labels that are carried in the packet header3. This allows GMPLS to support various transport networks and applications, such as optical transport networks (OTN), wavelength switched optical networks (WSON), and automatic switched optical networks (ASON)4. References:

1: Nokia GMPLS-controlled Optical Networks Course | Nokia

2: What is MPLS and GMPLS? - Metaswitch

3: Generalized Multi-Protocol Label Switching - Wikipedia

4: GMPLS - Nokia

Automation is one of the key features of GMPLS that allows dynamic provisioning of optical transport connections between IP routers and optical network elements2. Automation reduces the operational time and administrative overhead required to provision new connectivity, which in turn reduces the operational expenditure (OPEX) of the network. Reducing CAPEX, providing resilience against multiple failures, and supporting multi-vendor networks are not direct benefits of automation, but rather possible outcomes of using GMPLS in general. References:

1: Nokia GMPLS-controlled Optical Networks Course | Nokia

2: GMPLS - Nokia

3: Traffic survivability through Protection and Restoration Combined (PRC) - YouTube

[4]: GMPLS: Architecture and Applications - Google Books

The Soft Shutting Down state in the NFM-T is an administrative maintenance state where services stay up but no new traffic can be routed over the TE-link. This state is used to prepare a TE-link for maintenance or decommissioning without affecting the existing services. The NFM-T sets the TE-link to Soft Shutting Down state by sending a Notify message with the Administrative State Change flag to the head-end node of the TE-link. The head-end node then stops accepting new LSP requests over the TE-link and sends a PathErr message with the Administrative State Change flag to all the tail-end nodes of the LSPs in the TE-link. The tail-end nodes then stop sending new traffic over the LSPs and send a ResvErr message with the Administrative State Change flag to all the intermediate nodes of the LSPs. The intermediate nodes then update their routing tables and stop forwarding new traffic over the LSPs. The existing traffic, however, continues to flow over the LSPs until they are manually deleted or rerouted by the NFM-T. References : Nokia GMPLS-controlled Optical Networks Course | Nokia, Nokia Advanced Optical Network Management with NFM-T Course | Nokia

The GMRE notify address is an IP address used to signal failures on downstream nodes upstream to the head node. The GMRE notify address is configured on each GMRE node and is used to send a Notify message to the head node when a failure occurs on a link or node alongthe LSP. The Notify message contains the failure information and the LSP ID. The head node can then initiate a restoration process based on the Notify message. References : Nokia GMPLS-controlled Optical Networks Course | Nokia, GMPLS - Nokia

Quality of Service (QoS) in GMPLS is the ability to set constraints such as latency and priority for different kinds of services. This means that GMPLS can allocate network resources according to the specific requirements of each service, such as voice, video, or data. For example, a voice service may need low latency and high priority, while a data service may need high bandwidth and low priority. GMPLS can use Traffic Engineering (TE) extensions to OSPF and RSVP protocols to advertise and reserve network resources based on QoS parameters. References : [Nokia GMPLS-controlled Optical Networks Course | Nokia], [Quality of Service - Nokia]