When may acoustical and decorative materials such as cotton, hay, paper, straw, moss, split bamboo, and wood chips be used as decorations within an assembly occupancy?
A high-hazard occupancy less than 200 ft² (18.6 m²) in size, and with an occupant load not exceeding three, requires a second means of egress when the travel distance is greater than:
When submitting materials for plan review, the applicant has the responsibility to ensure
I. That construction documents include all of the fire protection requirements.
II. That shop drawings are correct and in compliance with applicable codes and standards.
III. That all contracts are in place.
After conducting the annual test of a dry barrel hydrant, what is the maximum length of time permitted for full drainage to take place?
Which of the following operations would NOT require a permit issued by the AHJ?
When conducting a main drain test of a water-based fire protection system riser, what percentage of reduction in full flow pressure (as compared to the acceptance test or previously performed test) will trigger an investigation into the cause of the reduction?
Where shall fire department connections on wet-pipe automatic sprinkler systems be located?
The authorization to issue permits is granted by the
In occupancies where a Class A or Class B interior finish is required, which of the following is the allowable amount of Class C materials?
How long should records of inspections be maintained?
