Pass the ISTQB Foundation Level ISTQB-CTFL Questions and answers with CertsForce

Experience-based testing techniques leverage the tester's intuition and prior experience to identify defects that systematic techniques might miss. These techniques are valuable because they can uncover issues based on real-world usage and scenarios that aren't always covered by more formalized black-box and white-box methods. The ISTQB CTFL Syllabus v4.0 highlights the complementary nature of experience-based techniques in providing a broader defect detection strategy​​.

The statement that refers to good testing practice to be applied regardless of the chosen software development model is option D, which says that involvement of testers in work product reviews should occur as early as possible to take advantage of the early testing principle. Work product reviews are static testing techniques, in which the work products of the software development process, such as the requirements, the design, the code, the test cases, etc., are examined by one or more reviewers, with or without the author, to identify defects, violations, or improvements. Involvement of testers in work product reviews can provide various benefits for the testing process, such as improving the test quality, the test efficiency, and the test communication. The early testing principle states that testing activities should start as early as possible in the software development lifecycle, and should be performed iteratively and continuously throughout the lifecycle. Applying the early testing principle can help to prevent, detect, and remove defects at an early stage, when they are easier, cheaper, and faster to fix, as well as to reduce the risk, the cost, and the time of the testing process. The other options are not good testing practices to be applied regardless of the chosen software development model, but rather specific testing practices that may or may not be applicable or beneficial for testing, depending on the context and the objectives of the testing activities, such as:

Tests should be written in executable format before the code is written and should act as executable specifications that drive coding: This is a specific testing practice that is associated with test-driven development, which is an approach to software development and testing, in which the developers write automated unit tests before writing the source code, and then refactor the code until the tests pass. Test-driven development can help to improve the quality, the design, and the maintainability of the code, as well as to provide fast feedback and guidance for the developers. However, test-driven development is not a good testing practice to be applied regardless of the chosen software development model, as it may not be feasible, suitable, or effective for testing in some contexts or situations, such as when the requirements are unclear, unstable, or complex, when the test automation tools or skills are not available or adequate, when the testing objectives or levels are not aligned with the unit testing, etc.

Test levels should be defined such that the exit criteria of one level are part of the entry criteria for the next level: This is a specific testing practice that is associated with sequential software development models, such as the waterfall model, the V-model, or the W-model, in which the software development and testing activities are performed in a linear and sequential order, with well-defined phases, deliverables, and dependencies. Test levels are the stages of testing that correspond to the levels of integration of the software system, such as component testing, integration testing, system testing, and acceptance testing. Test levels should have clear and measurable entry criteria and exit criteria, which are the conditions that must be met before starting or finishing a test level. In sequential software development models, the exit criteria of one test level are usually part of the entry criteria for the next test level, to ensure that the software system is ready and stable for the next level of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be relevant, flexible, or efficient for testing in some contexts or situations, such as when the software development and testing activities are performed in an iterative and incremental order, with frequent changes, feedback, and adaptations, as in agile software development models, such as Scrum, Kanban, or XP, when the test levels are not clearly defined or distinguished, or when the test levels are performed in parallel or concurrently, etc.

Test objectives should be the same for all test levels, although the number of tests designed at various levels can vary significantly: This is a specific testing practice that is associated with uniform software development models, such as the spiral model, the incremental model, or the prototyping model, in which the software development and testing activities are performed in a cyclical and repetitive manner, with similar phases, deliverables, and processes. Test objectives are the goals or the purposes of testing, which can vary depending on the test level, the test type, the test technique, the test environment, the test stakeholder, etc. Test objectives can be defined in terms of the test basis, the test coverage, the test quality, the test risk, the test cost, the test time, etc. Test objectives should be specific, measurable, achievable, relevant, and time-bound, and they should be aligned with the project objectives and the quality characteristics. In uniform software development models, the test objectives may be the same for all test levels, as the testing process is repeated for each cycle or iteration, with similar focus, scope, and perspective of testing. However, this is not a good testing practice to be applied regardless of the chosen software development model, as it may not be appropriate, realistic, or effective for testing in some contexts or situations, such as when the software development and testing activities are performed in a hierarchical and modular manner, with different phases, deliverables, and dependencies, as in sequential software development models, such as the waterfall model, the V-model, or the W-model, when the test objectives vary according to the test levels, such as component testing, integration testing, system testing, and acceptance testing, or when the test objectives change according to the feedback, the learning, or the adaptation of the testing process, as in agile software development models, such as Scrum, Kanban, or XP, etc. References: ISTQB Certified Tester Foundation Level (CTFL) v4.0 sources and documents:

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.1.1, Testing and the Software Development Lifecycle1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.1, Testing Principles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.2.2, Testing Policies, Strategies, and Test Approaches1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 1.3.1, Testing in Software Development Lifecycles1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.1, Test Planning1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.2, Test Monitoring and Control1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.3, Test Analysis and Design1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.4, Test Implementation1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.5, Test Execution1

ISTQB® Certified Tester Foundation Level Syllabus v4.0, Chapter 2.1.6, Test Closure1

ISTQB® Glossary of Testing Terms v4.0, Work Product Review, Static Testing, Early Testing, Test-driven Development, Test Level, Entry Criterion, Exit Criterion, Test Objective, Test Basis, Test Coverage, Test Quality, Test Risk, Test Cost, Test Time2

A successful review process involves all participants being trained in the review type and understanding its objectives. This ensures that everyone can contribute effectively and understand what is expected from the review. Proper training helps to identify defects accurately and facilitates constructive feedback, leading to a more efficient and effective review process. Hence, statement C is correct according to the ISTQB CTFL syllabus​​.

Selecting the right test technique is crucial because different techniques are suited to different types of testing and can significantly increase the effectiveness of the testing process by creating tests that are more likely to find defects. While reducing the number of tests (A) and defining the number of regression cycles (D) are considerations in the testing process, they are not the primary reasons for selecting a test technique. The assertion that the only way to test a software application is by using well-proven test techniques (B) is too restrictive and does not acknowledge the adaptability required in testing to suit different contexts and objectives. Therefore, option C is the most comprehensive reason, as it focuses on the effectiveness and efficiency of testing, leading to the creation of high-quality tests that have a higher chance of finding bugs.

Acceptance Test-Driven Development (ATDD) tests focus on verifying whether the system meets the specified acceptance criteria. The most critical path to test first would be the scenario where everything is done correctly (happy path), ensuring the basic functionality works as expected.

The new user provides all valid data.

This ensures the registration form works and the user receives a confirmation email.

This test covers the basic functionality and will help verify that the primary use case is handled correctly before testing invalid or edge cases.

This answer is correct because in Agile software development, work product documentation, such as user stories, acceptance criteria, or test cases, tends to be lightweight and concise, as the focus is on working software and frequent communication rather than comprehensive documentation. Manual tests tend to be often unscripted, as they are often produced using experience-based test techniques, such as error guessing or exploratory testing, which rely on the tester’s skills, knowledge, and creativity to find defects and provide feedback. References: ISTQB Foundation Level Syllabus v4.0, Section 3.1.1.2, Section 3.2.1.2

Being part of the support team means that the testers are closer to the customer perspective, which is an advantage for testing, as they can better understand the user needs and expectations, and identify more realistic scenarios and risks. However, being part of the support team also means that they have less independence in deciding what and how to test, as they may be influenced by the customer’s preferences or requests, which could compromise the objectivity and effectiveness of testing. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, page 6.

Comprehensive and Detailed In-Depth Explanation:

Branch testing is a structural testing technique that ensures each branch (decision point) in the control flow is executed at least once. The goal is to measure branch coverage, which is the number of branches exercised divided by the total number of branches.

(A) describes statement testing, not branch testing.

(B) and (D) introduce confusion between decisions and statements, whereas branch testing focuses on control flow branches.

In simple terms, branch testing checks that all possible decision outcomes (true/false) are executed, whereas statement testing only ensures that each line of code is executed.

Use case testing is a technique that helps identify test cases that exercise the whole system on a transaction by transaction basis from start to finish. Use cases are descriptions of how users interact with the system to achieve a specific goal. Use case testing is not focused on data flow, but rather on process flow. Use case testing can be performed by professional testers, customers or end users, depending on the context. Use case testing does not require the test cases to be designed by customers or end users, but rather by anyone who has access to the use case specifications. Verified References: A Study Guide to the ISTQB® Foundation Level 2018 Syllabus - Springer, Chapter 4, page 36.