Pass the Huawei HCIP-Data Center H12-893_V1.0 Questions and answers with CertsForce

iMaster NCE-Fabric automates network configuration delivery in Huawei’s CloudFabric. Let’s evaluate each statement:

A. Logical switches are mainly used for Layer 3 communication between hosts on a VXLAN network. These switches correspond to Layer 3 gateway configurations such as VBDIF interface and VPN instance configurations on physical devices:This is false. Logical switches in iMaster NCE-Fabric primarily handle Layer 2 communication (e.g., bridging within a VNI), corresponding to Bridge Domains (BDs) and Layer 2 VNIs. Layer 3communication is managed by gateways, not logical switches.FALSE.

B. An end port represents an online host. It corresponds to the traffic encapsulation type (whether a VLAN tag is carried) configured on a Layer 2 sub-interface of a physical device:This is true. End ports map to host connections, with encapsulation (VLAN-tagged or untagged) configured on sub-interfaces.TRUE.

C. A logical port is equivalent to an independent physical port that is used by a host to connect to a VXLAN network. It corresponds to the Layer 2 sub-interface configuration on a physical device:This is true. Logical ports represent host connections, mapped to Layer 2 sub-interfaces for VXLAN access.TRUE.

D. Logical switches are mainly used for Layer 2 communication between hosts on a VXLAN network. These switches correspond to BD and Layer 2 VNI configurations on physical devices:This is true. Logical switches facilitate Layer 2 connectivity, aligning with BD and VNI settings.TRUE.

Thus,Ais the false statement because logical switches are for Layer 2, not Layer 3, communication.References:Huawei CloudFabric Data Center Network Solution – iMaster NCE-Fabric Configuration; HCIP-Data Center Network Training – Logical Network Mapping.

Link aggregation, often implemented using Link Aggregation Control Protocol (LACP) on Huawei CloudEngine (CE) series switches, combines multiple physical links into a single logical link to enhance network performance and resilience. The primary advantages include:

Load Balancing Supported (B):Link aggregation distributes traffic across multiple links based on hashing algorithms (e.g., source/destination IP or MAC), improving load distribution and preventing any single link from becoming a bottleneck.

Increased Bandwidth (C):By aggregating multiple links (e.g., 1 Gbps ports into a 4 Gbps logical link), the total available bandwidth increases proportionally to the number of links.

Improved Reliability (D):If one link fails, traffic is automatically redistributed to the remaining links, ensuring continuous connectivity and high availability.

However,Improved Forwarding Performance of Switches (A)is not a direct advantage. Forwarding performance relates to the switch’s internal packet processing capabilities (e.g., ASIC performance, forwarding table size), which link aggregation does not inherently enhance. While it optimizes link utilization, it doesn’t improve the switch’s intrinsic forwarding rate or reduce latency at the hardware level. This aligns with Huawei’s CE series switch documentation, where link aggregation is described as enhancing bandwidth and reliability, not the switch’s core forwarding engine.References:Huawei CloudEngine Series Switch Configuration Guide – Link Aggregation Section.

Multi-Chassis Link Aggregation Group (M-LAG) is a high-availability technology on Huawei CloudEngine (CE) series switches, where two switches appear as a single logical device to downstream devices. The peer-link between the M-LAG peers synchronizes critical information to ensure seamless failover if one device fails. Let’s evaluate the entries:

A. MAC Address Entries:MAC address tables map device MACs to ports. In M-LAG, synchronizing MAC entries ensures that both switches know the location of connected devices. If one switch fails, the surviving switch can forward Layer 2 traffic without relearning MAC addresses, preventing disruptions.Required.

B. Routing Entries:Routing entries (e.g., OSPF or BGP routes) are maintained at Layer 3 and typically synchronized via routing protocols, not M-LAG peer-link packets. M-LAG operates at Layer 2, and while Layer 3 can be overlaid (e.g., with VXLAN), routing table synchronization is not a standard M-LAG requirement.Not Required.

C. IGMP Entries:IGMP (Internet Group Management Protocol) entries track multicast group memberships. While useful for multicast traffic, they are not critical for basic unicast traffic forwarding in M-LAG failover scenarios. Huawei documentation indicates IGMP synchronization is optional and context-specific, not mandatory for general traffic continuity.Not Required.

D. ARP Entries:ARP (Address Resolution Protocol) entries map IP addresses to MAC addresses, crucial for Layer 2/Layer 3 communication. Synchronizing ARP entries ensures the surviving switch can resolve IP-to-MAC mappings post-failover, avoiding ARP flooding or traffic loss.Required.

Thus,A (MAC address entries) and D (ARP entries)are essential for M-LAG synchronization to maintain traffic forwarding during failover, per Huawei CE switch M-LAG design.References:Huawei CloudEngine Series Switch Configuration Guide – M-LAG Section; HCIP-Data Center Network Training – High Availability Technologies.

Reliability in Huawei’s CloudFabric data centers is enhanced through various mechanisms. Let’s evaluate each option:

A. Power supply redundancy:This is true. Redundant power supplies (e.g., dual PSUs) ensure uninterrupted operation during power failures, a key reliability feature.TRUE.

B. M-LAG (Multi-Chassis Link Aggregation):This is true. M-LAG provides high availability by allowing active-active forwarding and failover between switches, enhancing network reliability.TRUE.

C. Monitor Link:This is false. Monitor Link is a Huawei feature for link status monitoring, not a direct reliability enhancement mechanism like redundancy or clustering.FALSE.

D. Controller cluster:This is true. A clustered SDN controller (e.g., iMaster NCE-Fabric) ensures high availability and failover, improving network management reliability.TRUE.

Thus,A, B, and Denhance DC reliability.References:Huawei CloudFabric Data Center Network Solution – Reliability Features; HCIP-Data Center Network Training – High Availability.

In Huawei’s spine-leaf DCN architecture, nodes have distinct roles:

A. Spine:The spine nodes form the backbone of the data center, providing high-speed IP forwarding between leaf nodes. They handle east-west traffic with non-blocking connectivity, making them the core backbone nodes.Correct.

B. DC1 leaf:This is not a standard node type; it may be a typo or misnomer. Leaf nodes connect to endpoints, not act as backbones.Incorrect.

C. Service leaf:Service leaf nodes connect to internal services (e.g., servers), not the backbone, focusing on access rather than high-speed forwarding.Incorrect.

D. Border leaf:Border leaf nodes connect to external networks, handling routing, not serving as the internal backbone.Incorrect.

Thus, the answer isA (Spine).References:Huawei CloudFabric Data Center Network Solution – Spine-Leaf Architecture; HCIP-Data Center Network Training – Node Roles.

In Huawei’s M-LAG (Multi-Chassis Link Aggregation), the heartbeat link (or peer-link) ensures communication between member devices. A fault in this link can impact M-LAG operation. Let’s evaluate each statement:

A. The fault that two master devices exist cannot be detected in the case of a peer-link fault:This is false. A peer-link fault can be detected, and mechanisms like dual-master detection (e.g., via Inter-Chassis Communication Link or ICC) can identify if both devices assume master roles, triggering corrective actions.FALSE.

B. An alarm is triggered:This is true. A peer-link fault generates an alarm to notify administrators, as it’s a critical failure in M-LAG operation, per Huawei’s fault management system.TRUE.

C. The fault protection mechanism is triggered:This is true. Huawei M-LAG includes protection mechanisms (e.g., failover to backup links or shutdown of conflicting interfaces) to mitigate peer-link faults and maintain service continuity.TRUE.

D. Services are affected:This is false. With proper configuration (e.g., redundant links or fast failover), services should not be affected by a peer-link fault, as M-LAG is designed for high availability. Impact depends on redundancy, but the design goal is uninterrupted service.FALSE.

Thus,A and Dare false statements because dual-master faults can be detected, and services are not necessarily affected with adequate redundancy.References:Huawei CloudEngine Series Switch Configuration Guide – M-LAG Fault Handling; HCIP-Data Center Network Training – M-LAG Reliability.

Huawei’s CloudFabric intelligent O&M solution, leveraging iMaster NCE-Fabric and FabricInsight, uses the "1-3-5" principle (detect within 1 minute, locate within 3 minutes, rectify within 5 minutes) to handle faults. This approach analyzes faults across multiple dimensions. Let’s evaluate each option:

A. Device:This is supported. The solution monitors device-level metrics (e.g., CPU, memory) to detect and locate faults.SUPPORTED.

B. Protocol:This is supported. Protocol issues (e.g., OSPF conflicts, BGP errors) are analyzed for fault detection and resolution.SUPPORTED.

C. Service:This is supported. Service-level faults (e.g., tenant connectivity, VPC issues) are tracked and addressed.SUPPORTED.

D. Application:This is not supported. The "1-3-5" troubleshooting focuses on network infrastructure (devices, protocols, services, configurations), not application-layer issues, which are outside its scope.NOT SUPPORTED.

E. Configuration:This is supported. Configuration errors (e.g., mismatched VNIs) are detected and rectified as part of the process.SUPPORTED.

Thus,D (Application)is not a dimension supported by the "1-3-5" troubleshooting function.References:Huawei CloudFabric Data Center Network Solution – Intelligent O&M; HCIP-Data Center Network Training – Troubleshooting Dimensions.

V-STP (Virtual Spanning Tree Protocol) is a Huawei-specific enhancement of the Spanning Tree Protocol (STP) designed to prevent Layer 2 loops in complex network topologies, including Multi-Chassis Link Aggregation (M-LAG) deployments on Huawei CloudEngine (CE) series switches.

M-LAG Overview:M-LAG allows two switches to appear as a single logical device, connecting to downstream devices via Link Aggregation Groups (LAGs). Without proper loop prevention, incorrect configurations (e.g., misconfigured ports) or physical connections (e.g., redundant links) can cause broadcast storms.

V-STP Role:V-STP extends STP to handle virtualized environments and M-LAG scenarios. It ensures that only one path is active in a loop-prone topology by blocking redundant links, preventing loops caused by misconfigurations or unintended connections. In M-LAG, V-STP coordinates with the peer-link to maintain a loop-free topology.

The statement isTRUE (A)because V-STP is designed to prevent loops in M-LAG deployments due to incorrect configurations or connections.References:Huawei CloudEngine Series Switch Configuration Guide – V-STP and M-LAG; HCIP-Data Center Network Training – Loop Prevention.