Pass the HP Aruba Certified Switching Professional (ACSP) V1 HPE6-A73 Questions and answers with CertsForce

Viewing page 3 out of 4 pages
Viewing questions 21-30 out of questions
Questions # 21:

An administrator is designing an access layer solution in a data center. A key requirement is to dual-home mission-critical server connections to two different switches, ensuring that the servers always have network access, even during switch software upgrades. This feature should support strictly-controlled provisioning.

What would best meet the administrator's needs when deploying AOS-CX switches?

Options:

A.

VSF


B.

Dynamic segmentation


C.

VSX


D.

NAE


Expert Solution
Questions # 22:

A network engineer is having a problem adding a custom-written script to an AOS-CX switch’s NAE GUI. The script was written in Python and was successfully added on other AOS-CX switches. The engineer examines the following items from the CLI of the switch:

Question # 22

What should the engineer perform to fix this issue?

Options:

A.

Install the script’s signature before installing the new script


B.

Ensure the engineer’s desktop and the AOS-CX switch are synchronized to the same NTP server


C.

Enable trust settings for the AOS-CX switch’s SSL certificate


D.

Remove a script that is no longer used before installing the new script


Expert Solution
Questions # 23:

What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?

Options:

A.

Only a traffic rate and burst size can be defined for a queue


B.

Limits can be defined only for broadcast and multicast traffic


C.

Rate limiting and egress queue shaping can be used to restrict inbound traffic


D.

Rate limiting and egress queue shaping can be applied globally


Expert Solution
Questions # 24:

When implementing deficit weighted round robin queuing, what importance does the weight value have?

Options:

A.

Prioritizing latency-sensitive traffic


B.

Queue priority in processing traffic


C.

Strict priority queue


D.

Percentage of interface bandwidth


Expert Solution
Questions # 25:

An administrator is managing a VSX pair of AOS-CX switches An administrator configures the following on the primary AOS-CX switch:

Question # 25

Options:

A.

The primary switch will erase VLAN 200 from the VSX pair


B.

The VLAN is only created on the secondary switch.


C.

The operation is not allowed by the switch and a CLI error is displayed


D.

The VLAN is created on both the primary and secondary switches


Expert Solution
Questions # 26:

Examine the commands entered on an AOS-CX switch:

What is true regarding this configuration for traffic received on interface 100?

Options:

A.

The default next-hop address supersedes the two preceding next-hop addresses


B.

The traffic is always dropped is the next-hop addresses are unreachable


C.

The traffic will be routed with the IP routing table entries if the next-hop addresses are unreachable


D.

The next-hop address of 1.1.1.1 is overwritten by the next-hop address of 2.2.2.2


Expert Solution
Questions # 27:

Which does VOQ implement that is different from most typical campus switches?

Options:

A.

Large ingress packet buffers


B.

vsx


C.

Per-port ASICs


D.

Large egress packet buffers


Expert Solution
Questions # 28:

How does an administrator install a script and create an agent and actions for the Network Analysis Engine running on AOS-CX switches?

Options:

A.

Access the switches' command-line interface.


B.

Access the switches' web user interface


C.

Use Aruba Central's web user interface


D.

Use the NetEdit web user interface


Expert Solution
Questions # 29:

An administrate is managing a VSX pair of AOS-CX switches. The administrator configures the following on the secondary switch:

secondary (config)# vlan 100

secondary (conflg. vlan-100) # description BBB

Currently VLAN 100 does not exist on the primary switch. The administrator then accesses the primary switch and configures the following:

Primary(config) vlan 100 primary(config-v1an-100) # description AAA

What Is correct regarding the results of this configuration?

Options:

A.

Each switch will have a different description defined.


B.

Both switches will have a description of "AAA".


C.

Both switches will have a description of "BBS".


D.

An error Is displayed on the primary switch regarding a mismatched parameter.


Expert Solution
Questions # 30:

A network has an ABR that connects area 0 and 1. A network engineer configures a summarized route for area 0. The ABR is a designated router (DR) for the segment it uses to connect to area 1.

Which LSA type is assigned to this route when the summarized route is advertised into area 1 by the ABR?

Options:

A.

LSA1


B.

LSA4


C.

LSA3


D.

LSA2


Expert Solution
Viewing page 3 out of 4 pages
Viewing questions 21-30 out of questions